State management

User state commands reduced to Init() and Off() which request (re)initialisation and turning the device off, respectively. All transitions are managed by the device.

RCUSCC/RCUSCC/RCUSCC.py

@@ -25,7 +25,7 @@ import sys
 import opcua
 import numpy
 
-from wrappers import only_when_on, fault_on_error
+from wrappers import only_in_states, only_when_on, fault_on_error
 from opcua_connection import OPCUAConnection
 
 __all__ = ["RCUSCC", "main"]
@@ -42,6 +42,25 @@ class RCUSCC(Device):
             - Type:'DevULong'
         OPC_Time_Out
             - Type:'DevDouble'
+
+    States are as follows:
+        INIT    = Device is initialising.
+        STANDBY = Device is initialised, but pends external configuration and an explicit turning on,
+        ON      = Device is fully configured, functional, controls the hardware, and is possibly actively running,
+        FAULT   = Device detected an unrecoverable error, and is thus malfunctional,
+        OFF     = Device is turned off, drops connection to the hardware,
+
+    The following state transitions are implemented:
+        boot -> OFF:     Triggered by tango.  Device will be instantiated,
+        OFF  -> INIT:    Triggered by device. Device will initialise (connect to hardware, other devices),
+        INIT -> STANDBY: Triggered by device. Device is initialised, and is ready for additional configuration by the user,
+        STANDBY -> ON:   Triggered by user.   Device reports to be functional,
+        * -> FAULT:      Triggered by device. Device has degraded to malfunctional, for example because the connection to the hardware is lost,
+        * -> FAULT:      Triggered by user.   Emulate a forced malfunction for integration testing purposes,
+        * -> OFF:        Triggered by user.   Device is turned off. Triggered by the Off() command,
+        FAULT -> INIT:   Triggered by user.   Device is reinitialised to recover from an error,
+
+        The user triggers their transitions by the commands reflecting the target state (Init(), On(), Fault()).
     """
     client = 0
     name_space_index = 0
@@ -207,11 +226,16 @@ class RCUSCC(Device):
         self.debug_stream("Mapping OPC-UA MP/CP to attributes done.")
 
     def init_device(self):
-        """Initialises the attributes and properties of the RCUSCC."""
+        """ Instantiates the device in the OFF state. """
 
         # NOTE: Will delete_device first, if necessary
         Device.init_device(self)
 
+        self.set_state(DevState.OFF)
+
+    def initialise(self):
+        """Initialises the attributes and properties of the RCUSCC."""
+
         self.set_state(DevState.INIT)
 
         # Init the dict that contains attribute to OPC-UA MP/CP mappings.
@@ -257,9 +281,10 @@ class RCUSCC(Device):
 
         self.client = opcua.Client("opc.tcp://{}:{}/".format(self.OPC_Server_Name, self.OPC_Server_Port), self.OPC_Time_Out) # timeout in seconds
 
-        # Connect to OPC-UA -- will set ON state on success
-        self.opcua_connection = OPCUAConnection(self.client, self.On, self.Fault, self)
+        # Connect to OPC-UA -- will set ON state on success in case of a reconnect
+        self.opcua_connection = OPCUAConnection(self.client, self.Standby, self.Fault, self)
 
+        # Explicitly connect
         if not self.opcua_connection.connect():
             # hardware or infra is down -- needs fixing first
             self.Fault()
@@ -276,16 +301,8 @@ class RCUSCC(Device):
         # Start keep-alive
         self.opcua_connection.start()
 
-        # Everything went ok -- go online
-        self.On()
-
-    @DebugIt()
-    def On(self):
-        """
-
-        :return:None
-        """
-        self.set_state(DevState.ON)
+        # Everything went ok -- go standby.
+        self.set_state(DevState.STANDBY)
 
 
     def always_executed_hook(self):
@@ -432,23 +449,53 @@ class RCUSCC(Device):
 
     @command(
     )
+    @only_in_states([DevState.FAULT, DevState.OFF])
     @DebugIt()
     def Init(self):
         """
+        Command to ask for initialisation of this device. Can only be called in FAULT or OFF state.
+
+        :return:None
+        """
+
+        self.initialise()
+
+    @only_in_states([DevState.INIT])
+    def Standby(self):
+        """
+        Command to ask for initialisation of this device. Can only be called in FAULT or OFF state.
 
         :return:None
         """
 
-        self.init_device()
+        self.set_state(DevState.STANDBY)
+
+    @command(
+    )
+    @only_in_states([DevState.STANDBY])
+    @DebugIt()
+    def On(self):
+        """
+        Command to ask for initialisation of this device. Can only be called in FAULT or OFF state.
+
+        :return:None
+        """
+
+        self.set_state(DevState.ON)
 
     @command(
     )
     @DebugIt()
     def Off(self):
         """
+        Command to ask for shutdown of this device.
 
         :return:None
         """
+        if self.get_state() == DevState.OFF:
+          # Already off. Don't complain.
+          return
+
         # Turn off
         self.set_state(DevState.OFF)
 
@@ -458,15 +505,17 @@ class RCUSCC(Device):
         # Turn off again, in case of race conditions through reconnecting
         self.set_state(DevState.OFF)
 
-
     @command(
     )
+    @only_in_states([DevState.ON, DevState.INIT, DevState.STANDBY])
     @DebugIt()
     def Fault(self):
         """
         FAULT state is used to indicate our connection with the OPC-UA server is down.
 
-        This device will try to reconnect, and transition to the ON state on success.
+        This device will try to reconnect once, and transition to the ON state on success.
+
+        If reconnecting fails, the user needs to call Init() to retry to restart this device.
 
         :return:None
         """