Skip to content
Snippets Groups Projects
Commit d8adc1f1 authored by Jan Oudman's avatar Jan Oudman
Browse files

added new toplevel src and tb files (resp. mms_st_histogram,... 

added new toplevel src and tb files (resp. mms_st_histogram, tb_mms_st_histogram) files to make readout in mm_clk domain possible
parent 014bc5da
Branches
No related tags found
2 merge requests!28Master,!20Resolve STAT-314
Show whitespace changes
Inline Side-by-side
libraries/dsp/st/hdllib.cfg
+ 3
− 0
View file @ d8adc1f1
......@@ -11,12 +11,15 @@ synth_files =
src/vhdl/st_sst.vhd
# src/vhdl/st_top.vhd
src/vhdl/st_histogram.vhd
src/vhdl/st_histogram_reg.vhd
src/vhdl/mms_st_histogram.vhd
test_bench_files =
tb/vhdl/tb_st_acc.vhd
tb/vhdl/tb_st_calc.vhd
tb/vhdl/tb_mmf_st_sst.vhd
tb/vhdl/tb_st_histogram.vhd
tb/vhdl/tb_mms_st_histogram.vhd
regression_test_vhdl =
tb/vhdl/tb_st_acc.vhd
......
libraries/dsp/st/src/vhdl/st_histogram.vhd
+ 126
− 55
View file @ d8adc1f1
......@@ -21,13 +21,14 @@
-------------------------------------------------------------------------------
--
-- Author: J.W.E. Oudman
-- Purpose: Create a histogram from the input data and present it to the MM bus
-- Purpose: Create a histogram from the input data and present it to
-- st_histogram_reg
-- Description:
-- The histogram component separates it's input samples in counter bins based
-- on the value of the MSbits of the input. These bins are adresses on a RAM
-- block that is swapped with another RAM block at every sync pulse plus 2
-- cycles. While one RAM block is used to count the input samples, the other
-- is read by the MM bus through a fifo.
-- is read by the MM bus through st_histogram_reg.
--
--
-- ram_pointer ram_pointer
......@@ -35,16 +36,16 @@
-- | /o--- RAM_0 ---o |
-- |/ |
-- / |
-- snk_in ----o/ | /o----- FIFO to MM ---- MM
-- |/
-- snk_in ----o/ | /o----- ram_miso (st_histogram_reg)
-- |/ _mosi
-- /
-- o--- RAM_1 ---o/
--
--
-- The input data is a dp stream which obviously uses a dp_clk. Because the
-- RAM is swapped after every sync both RAM blocks need to use the dp_clk.
-- Because the MM bus needs to access one RAM block but can't use it's mm_clk
-- on it a FIFO is used.
-- If the MM bus needs to acces the data in a RAM block it has to acces it
-- through st_histogram_reg as the mm_clk can't be used.
--
-- Remarks:
-- . Because the values of the generics g_nof_bins depends on g_in_data_w
......@@ -84,17 +85,17 @@ ENTITY st_histogram IS
g_str : STRING := "freq.density" -- to select output to MM bus ("frequency" or "freq.density")
);
PORT (
mm_rst : IN STD_LOGIC;
mm_clk : IN STD_LOGIC;
dp_rst : IN STD_LOGIC;
dp_clk : IN STD_LOGIC;
-- Streaming
snk_in : IN t_dp_sosi;
-- Memory Mapped
ram_mosi : IN t_mem_mosi;
ram_miso : OUT t_mem_miso
-- DP clocked memory bus
sla_in_ram_mosi : IN t_mem_mosi; -- Beware, works in dp clock domain !
sla_out_ram_miso : OUT t_mem_miso -- '' !
-- ram_mosi : IN t_mem_mosi; -- Beware, works in dp clock domain !
-- ram_miso : OUT t_mem_miso -- '' !
);
END st_histogram;
......@@ -140,6 +141,10 @@ ARCHITECTURE str OF st_histogram IS
SIGNAL rd_dat_b : STD_LOGIC_VECTOR(c_word_w -1 DOWNTO 0);
SIGNAL rd_val_b : STD_LOGIC;
SIGNAL mm_adr_cnt : NATURAL := 0 ;
SIGNAL mm_adr_illegal : STD_LOGIC := '0';
SIGNAL mm_adr_illegal_pp : STD_LOGIC := '0';
SIGNAL ram_0_wr_en_a : STD_LOGIC;
SIGNAL ram_0_wr_en_b : STD_LOGIC := '0'; -- pointer=1, temp'0'
......@@ -167,13 +172,16 @@ ARCHITECTURE str OF st_histogram IS
SIGNAL ram_out_rd_dat : STD_LOGIC_VECTOR(c_word_w -1 DOWNTO 0);
SIGNAL ram_out_rd_val : STD_LOGIC;
SIGNAL fifo_in_wr_en : STD_LOGIC := '0';
SIGNAL fifo_in_wr_dat : STD_LOGIC_VECTOR(c_word_w -1 DOWNTO 0) := (OTHERS => '0');
SIGNAL fifo_in_wr_adr : STD_LOGIC_VECTOR(g_in_data_w -1 DOWNTO c_adr_low) := (OTHERS => '0');
SIGNAL fifo_in_rd_adr : STD_LOGIC_VECTOR(g_in_data_w -1 DOWNTO c_adr_low) := (OTHERS => '0');
SIGNAL fifo_in_rd_en : STD_LOGIC := '0';
SIGNAL fifo_in_rd_dat : STD_LOGIC_VECTOR(c_word_w -1 DOWNTO 0);
SIGNAL fifo_in_rd_val : STD_LOGIC;
SIGNAL prev_ram_out_wr_adr : STD_LOGIC_VECTOR(g_in_data_w -1 DOWNTO c_adr_low);
SIGNAL ram_out_same_w_r_adr : STD_LOGIC;
-- SIGNAL fifo_in_wr_en : STD_LOGIC := '0';
-- SIGNAL fifo_in_wr_dat : STD_LOGIC_VECTOR(c_word_w -1 DOWNTO 0) := (OTHERS => '0');
-- SIGNAL fifo_in_wr_adr : STD_LOGIC_VECTOR(g_in_data_w -1 DOWNTO c_adr_low) := (OTHERS => '0');
-- SIGNAL fifo_in_rd_adr : STD_LOGIC_VECTOR(g_in_data_w -1 DOWNTO c_adr_low) := (OTHERS => '0');
-- SIGNAL fifo_in_rd_en : STD_LOGIC := '0';
-- SIGNAL fifo_in_rd_dat : STD_LOGIC_VECTOR(c_word_w -1 DOWNTO 0);
-- SIGNAL fifo_in_rd_val : STD_LOGIC;
BEGIN
......@@ -309,6 +317,7 @@ BEGIN
wr_en_a <= nxt_wr_en_a;
same_r_w_adr <= nxt_same_r_w_adr;
cycle_cnt <= nxt_cycle_cnt;
prev_ram_out_wr_adr <= ram_out_wr_adr;
END IF;
END PROCESS;
......@@ -326,10 +335,6 @@ BEGIN
p_ram_pointer : PROCESS(ram_pointer, wr_en_a, wr_dat_a, adr_a, adr_b, rd_en_b, ram_0_rd_dat_b, ram_0_rd_val_b,
ram_out_wr_en, ram_out_wr_dat, ram_out_wr_adr, ram_out_rd_adr, ram_out_rd_en, ram_1_rd_dat_b, ram_1_rd_val_b) IS
BEGIN
-- Default / init values
-- ram_miso <= c_mem_miso_rst;
-- ram_0_mosi <= c_common_pipelinemem_mosi_rst;
IF ram_pointer='0' THEN
-- ST side (RAM 0)
......@@ -342,7 +347,7 @@ BEGIN
rd_val_b <= ram_0_rd_val_b;
-- MM side (RAM 1)
-- dp_clk'd MM side (RAM 1)
ram_1_wr_en_a <= ram_out_wr_en;
ram_1_wr_dat_a <= ram_out_wr_dat;
ram_1_adr_a <= ram_out_wr_adr;
......@@ -363,7 +368,7 @@ BEGIN
rd_dat_b <= ram_1_rd_dat_b;
rd_val_b <= ram_1_rd_val_b;
-- MM side (RAM 0)
--dp_clk'd MM side (RAM 0)
ram_0_wr_en_a <= ram_out_wr_en;
ram_0_wr_dat_a <= ram_out_wr_dat;
ram_0_adr_a <= ram_out_wr_adr;
......@@ -371,10 +376,7 @@ BEGIN
ram_0_rd_en_b <= ram_out_rd_en;
ram_out_rd_dat <= ram_0_rd_dat_b;
ram_out_rd_val <= ram_0_rd_val_b;
--
--
-- ram_miso <= ram_0_miso;
-- ram_0_mosi <= ram_mosi;2
END IF;
END PROCESS;
......@@ -478,6 +480,25 @@ BEGIN
-----------------------------------------------------------------------------
-- Pipeline for identified illegal read requests after new sync
-----------------------------------------------------------------------------
u_common_pipeline_sl_mm_adr_illegal : ENTITY common_lib.common_pipeline_sl
GENERIC MAP(
g_pipeline => 2 -- 0 for wires, > 0 for registers,
)
PORT MAP (
clk => dp_clk,
in_dat => mm_adr_illegal,
out_dat => mm_adr_illegal_pp
);
-----------------------------------------------------------------------------
-- Dual swapped RAM instance
-----------------------------------------------------------------------------
......@@ -524,10 +545,28 @@ BEGIN
-----------------------------------------------------------------------------
-- Connect MM interface to DUAL swapped RAM read out histogram statistics
-- Connect interface to DUAL swapped RAM, read out histogram statistics:
-- . Limit the data read by the MM master to the RAM block where it started
-- to read (the values read after a new sync will be OTHERS => '0')
-- . In the last g_nof_bins cycles all addresses will sequentially be cleared
-----------------------------------------------------------------------------
p_ram_to_fifo : PROCESS(dp_pipeline_src_out_pp.sync, cycle_cnt) IS
p_mm_adr_illegal : PROCESS(snk_in.sync, mm_adr_cnt) IS
BEGIN
IF snk_in.sync = '1' AND mm_adr_cnt /= 0 THEN
mm_adr_illegal <= '1';
ELSIF mm_adr_cnt = g_nof_bins-1 THEN
mm_adr_illegal <= '0';
ELSE
END IF;
END PROCESS;
mm_adr_cnt <= TO_UINT(sla_in_ram_mosi.address(c_ram.adr_w-1 DOWNTO 0)) WHEN sla_in_ram_mosi.rd = '1';
ram_out_same_w_r_adr <= '1' WHEN ram_out_wr_adr = sla_in_ram_mosi.address(c_ram.adr_w-1 DOWNTO 0) ELSE '0';
p_ram_to_fifo : PROCESS(dp_pipeline_src_out_pp.sync, cycle_cnt, sla_in_ram_mosi.address, sla_in_ram_mosi.rd, ram_out_rd_dat, ram_out_rd_val, prev_ram_out_wr_adr, mm_adr_illegal, ram_out_same_w_r_adr) IS
BEGIN
IF dp_pipeline_src_out_pp.sync = '1' THEN
ram_out_wr_en <= '0';
......@@ -536,25 +575,57 @@ BEGIN
ram_out_wr_adr <= (OTHERS => '0');
ram_out_wr_dat <= (OTHERS => '0');
ram_out_wr_en <= '1';
ram_out_rd_en <= '0';
nxt_cycle_cnt <= nxt_cycle_cnt +1;
IF ram_out_same_w_r_adr = '1' THEN
--ram_out_rd_adr <= sla_in_ram_mosi.address(c_ram.adr_w-1 DOWNTO 0); -- fifo_in_rd_adr;
ram_out_rd_en <= '0'; --sla_in_ram_mosi.rd; -- fifo_in_rd_en;
sla_out_ram_miso.rddata(c_ram.dat_w-1 DOWNTO 0) <= (OTHERS => '0'); -- ram_out_rd_dat;
sla_out_ram_miso.rdval <= ram_out_rd_val; -- ram_out_rd_val;
ELSE
ram_out_rd_adr <= sla_in_ram_mosi.address(c_ram.adr_w-1 DOWNTO 0); -- fifo_in_rd_adr;
ram_out_rd_en <= sla_in_ram_mosi.rd; -- fifo_in_rd_en;
sla_out_ram_miso.rddata(c_ram.dat_w-1 DOWNTO 0) <= ram_out_rd_dat;
sla_out_ram_miso.rdval <= ram_out_rd_val; -- ram_out_rd_val;
END IF;
--ram_out_rd_en <= '0';
nxt_cycle_cnt <= cycle_cnt +1;
ELSIF cycle_cnt > c_clear THEN
ram_out_wr_adr <= INCR_UVEC(ram_out_wr_adr, 1);
nxt_cycle_cnt <= nxt_cycle_cnt +1;
ram_out_wr_adr <= INCR_UVEC(prev_ram_out_wr_adr, 1);
--prev_ram_out_wr_adr <= ram_out_wr_adr;
nxt_cycle_cnt <= cycle_cnt +1;
IF ram_out_same_w_r_adr = '1' OR snk_in.sync = '1' THEN
--ram_out_rd_adr <= sla_in_ram_mosi.address(c_ram.adr_w-1 DOWNTO 0); -- fifo_in_rd_adr;
--ram_out_rd_en <= sla_in_ram_mosi.rd; -- fifo_in_rd_en;
sla_out_ram_miso.rddata(c_ram.dat_w-1 DOWNTO 0) <= (OTHERS => '0'); -- ram_out_rd_dat;
sla_out_ram_miso.rdval <= ram_out_rd_val; -- ram_out_rd_val;
ELSE
ram_out_rd_adr <= sla_in_ram_mosi.address(c_ram.adr_w-1 DOWNTO 0); -- fifo_in_rd_adr;
ram_out_rd_en <= sla_in_ram_mosi.rd; -- fifo_in_rd_en;
sla_out_ram_miso.rddata(c_ram.dat_w-1 DOWNTO 0) <= ram_out_rd_dat;
sla_out_ram_miso.rdval <= ram_out_rd_val; -- ram_out_rd_val;
END IF;
-- ELSIF snk_in.sync = '1' AND mm_adr_cnt /= 0 THEN
-- mm_adr_illegal <= '1';
-- ELSIF mm_adr_cnt = g_nof_bins THEN
-- mm_adr_illegal <= '0';
ELSIF mm_adr_illegal_pp = '1' THEN
ram_out_rd_adr <= sla_in_ram_mosi.address(c_ram.adr_w-1 DOWNTO 0); -- fifo_in_rd_adr;
ram_out_rd_en <= sla_in_ram_mosi.rd; -- fifo_in_rd_en;
sla_out_ram_miso.rddata(c_ram.dat_w-1 DOWNTO 0) <= (OTHERS => '0'); -- ram_out_rd_dat;
sla_out_ram_miso.rdval <= ram_out_rd_val; -- ram_out_rd_val;
nxt_cycle_cnt <= cycle_cnt +1;
ELSE
ram_out_wr_en <= fifo_in_wr_en;
ram_out_wr_dat <= fifo_in_wr_dat;
ram_out_wr_adr <= fifo_in_wr_adr;
ram_out_rd_adr <= fifo_in_rd_adr;
ram_out_rd_en <= fifo_in_rd_en;
fifo_in_rd_dat <= ram_out_rd_dat;
fifo_in_rd_val <= ram_out_rd_val;
nxt_cycle_cnt <= nxt_cycle_cnt +1;
-- ram_out_wr_en <= ram_mosi.wr --fifo_in_wr_en;
-- ram_out_wr_dat <= ram_mosi.wrdata(c_ram.dat_w-1 DOWNTO 0) -- fifo_in_wr_dat;
-- ram_out_wr_adr <= fifo_in_wr_adr;
ram_out_rd_adr <= sla_in_ram_mosi.address(c_ram.adr_w-1 DOWNTO 0); -- fifo_in_rd_adr;
ram_out_rd_en <= sla_in_ram_mosi.rd; -- fifo_in_rd_en;
sla_out_ram_miso.rddata(c_ram.dat_w-1 DOWNTO 0) <= ram_out_rd_dat; -- ram_out_rd_dat;
sla_out_ram_miso.rdval <= ram_out_rd_val; -- ram_out_rd_val;
nxt_cycle_cnt <= cycle_cnt +1;
END IF;
END PROCESS;
END str;
libraries/dsp/st/tb/vhdl/tb_st_histogram.vhd
+ 8
− 10
View file @ d8adc1f1
......@@ -20,7 +20,7 @@ END tb_st_histogram;
ARCHITECTURE tb OF tb_st_histogram IS
CONSTANT c_mm_init_time : NATURAL := 5;
-- CONSTANT c_mm_init_time : NATURAL := 5; -- <--
CONSTANT c_dp_inti_time : NATURAL := 5;
SIGNAL tb_end : STD_LOGIC := '0';
......@@ -28,12 +28,12 @@ ARCHITECTURE tb OF tb_st_histogram IS
----------------------------------------------------------------------------
-- Clocks and resets
----------------------------------------------------------------------------
CONSTANT c_mm_clk_period : TIME := 20 ns;
-- CONSTANT c_mm_clk_period : TIME := 20 ns; -- <--
CONSTANT c_dp_clk_period : TIME := 5 ns;
SIGNAL mm_rst : STD_LOGIC := '1';
SIGNAL mm_clk : STD_LOGIC := '1';
-- SIGNAL mm_rst : STD_LOGIC := '1'; -- <--
-- SIGNAL mm_clk : STD_LOGIC := '1';
SIGNAL dp_rst : STD_LOGIC;
SIGNAL dp_clk : STD_LOGIC := '1';
......@@ -53,8 +53,8 @@ BEGIN
----------------------------------------------------------------------------
-- Clock and reset generation
----------------------------------------------------------------------------
mm_clk <= NOT mm_clk OR tb_end AFTER c_mm_clk_period/2;
mm_rst <= '1', '0' AFTER c_mm_clk_period*c_mm_init_time;
-- mm_clk <= NOT mm_clk OR tb_end AFTER c_mm_clk_period/2; -- <--
-- mm_rst <= '1', '0' AFTER c_mm_clk_period*c_mm_init_time;
dp_clk <= NOT dp_clk OR tb_end AFTER c_dp_clk_period/2;
dp_rst <= '1', '0' AFTER c_dp_clk_period*c_dp_inti_time;
......@@ -233,8 +233,6 @@ BEGIN
g_str => g_str
)
PORT MAP (
mm_rst => mm_rst,
mm_clk => mm_clk,
dp_rst => dp_rst,
dp_clk => dp_clk,
......@@ -242,8 +240,8 @@ BEGIN
snk_in => st_histogram_snk_in,
-- Memory Mapped
ram_mosi => c_mem_mosi_rst,
ram_miso => OPEN
sla_in_ram_mosi => c_mem_mosi_rst,
sla_out_ram_miso => OPEN
);
END tb;
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Please register or to comment