UPdated readme file

applications/apertif/designs/apertif_unb1_cor_mesh_ref/doc/README.

@@ -10,11 +10,17 @@ Generate MMM for QSYS:
   * run_qsys unb1 apertif_unb1_cor_mesh_ref 
     
     (Be sure that in RadioHDL/trunk/tools/quartus/run_qsys the part that generates
-     the simulation file is enabled by uncommenting that part, alternatively you can 
+     the simulation file is enabled by uncommenting that part. Alternatively you can 
      generate the QSYS system with the GUI and enabling the simulation files in the
      last tab)
      
-  * 
+  * When changes are made to the mmm-configuration file (mmm.cfg) you can auto-generate 
+    the mmm_apertif_unb1_cor_mesh_ref entity. Be sure that the QSYS configuration is
+    changed and generated accordingly WITH SIMULATION FILES ENABLED!!!! 
+    
+    Create the mmm-entity with command:
+    
+    python $RADIOHDL/tools/oneclick/base/mmm_gen.py -l apertif_unb1_cor_mesh_ref
 
 -> From here either continue to Modelsim (simulation) or Quartus (synthesis)
 
@@ -26,20 +32,40 @@ Modelsim instructions:
     run_modelsim unb1
 
     # in Modelsim do:
-    lp unb1_ddr3_reorder
+    lp apertif_unb1_cor_mesh_ref
     mk all
-    # now double click on testbench file tb_unb1_ddr3_reorder
-    as 10
-    run 500us
+    # now double click on testbench file tb_apertif_unb1_cor_mesh_ref
+    as 7
+    run -a
 
-    # while the simulation runs... in another bash session do:
-    cd unb1_ddr3_reorder/tb/python
-    python tc_unb1_ddr3_reorder_seq.py --sim --unb 0 --bn 3 --rep 3 -v 5
+    # while the simulation runs... in another bash session go to:
+    cd $RADIOHDL/applications/apertif/designs/apertif_unb1_cor_mesh_ref/tb/python
+    
+    # and run: 
     
-    # note --bn 3 must match the node setting in the tb_unb1_ddr3_reorder.
-    # to run the test again use --read or --rerun:
-    python tc_unb1_ddr3_reorder_seq.py --sim --unb 0 --bn 3 --rep 1 -v 3 --read
-    python tc_unb1_ddr3_reorder_seq.py --sim --unb 0 --bn 3 --rep 1 -v 3 --rerun
+    python tc_apertif_unb1_cor_mesh_ref.py --sim --unb 0 --gn 0:7 
+    
+    The expected output is as follows: 
+    
+     The Real output 
+     [0, 0, 0, 0, 0, 0, 0, 0]
+     [1, 1, 1, 1, 1, 1, 1, 1]
+     [2, 2, 2, 2, 2, 2, 2, 2]
+     [3, 3, 3, 3, 3, 3, 3, 3]
+     [4, 4, 4, 4, 4, 4, 4, 4]
+     [5, 5, 5, 5, 5, 5, 5, 5]
+     [6, 6, 6, 6, 6, 6, 6, 6]
+     [7, 7, 7, 7, 7, 7, 7, 7]
+     
+     The Imaginary output 
+     [0, 2, 4, 6, 1, 3, 5, 7]
+     [0, 2, 4, 6, 1, 3, 5, 7]
+     [0, 2, 4, 6, 1, 3, 5, 7]
+     [0, 2, 4, 6, 1, 3, 5, 7]
+     [0, 2, 4, 6, 1, 3, 5, 7]
+     [0, 2, 4, 6, 1, 3, 5, 7]
+     [0, 2, 4, 6, 1, 3, 5, 7]
+     [0, 2, 4, 6, 1, 3, 5, 7]
     
     # to end simulation in Modelsim do:
     quit -sim
@@ -48,10 +74,10 @@ Modelsim instructions:
 Quartus instructions:
     # GUI:
     run_quartus unb1 &
-    # Open project unb1_ddr3_reorder.qpf and Start compilation
+    # Open project apertif_unb1_cor_mesh_ref.qpf and Start compilation
     
     or    
     
     # Command line:
-    run_qcomp unb1 unb1_ddr3_reorder
+    run_all_qsys unb1 apertif_unb1_cor_mesh_ref