Merge branch 'master' into L2SDP-965

doc/erko_howto_tools.txt

@@ -113,17 +113,21 @@ during tb simulation load --> fixed by "sudo chmod a+w -R modelsim_altera_libs/1
 > quartus_config unb2c
 > run_quartus unb2c &
  - Open project
+   . for sdp open: lofar2_unb2c_sdp_station_full revision, because mother revision has no qpf
  - Tools/Platform Designer
    . Platform designer system choose qsys from build
  - In system view:
    . remove components
    . add components from Uniboard library (double click avs_common_mm or use green +)
-     use qsys_unb2c_test_ prefix in component name ip file, but rename component without prefix
+     set parameter g_addr_w for avs_common_mm
+     use qsys_unb2c_test_ prefix in component name ip file, but then rename component without prefix in System view window
+     for sdp use prefix: qsys_lofar2_unb2c_sdp_station_
+   . connect busses via the graphical dots, similar as for other ports
    . use periperal names that match the upe_gear default name + instance scheme
      double click export name to change it, none for default
    . System/assign base addresses
      System/assign interrupt numbers
-     if needed do: Sync system infos button
+     if needed do: Sync system infos button at bottom
    . copy component from Generate/Show instance template --> qsys_unb2c_test_pkg.vhd
    . no need to generate HDL
  - Ignore warning about avs_eth_0 IP parameterization
@@ -135,14 +139,16 @@ during tb simulation load --> fixed by "sudo chmod a+w -R modelsim_altera_libs/1
    . cp build/unb2c/quartus/unb2c_test_1GbE_I/qsys_unb2c_test.qsys boards/uniboard2c/designs/unb2c_test/quartus
 
    lofar2 unb2c
+   . ls -lt build/unb2c/quartus/lofar2_unb2c_sdp_station_full/ip/qsys_lofar2_unb2c_sdp_station/*.ip
    . cp build/unb2c/quartus/lofar2_unb2c_sdp_station_full/ip/qsys_lofar2_unb2c_sdp_station/*.ip applications/lofar2/designs/lofar2_unb2c_sdp_station/quartus/ip/qsys_lofar2_unb2c_sdp_station/
    . cp build/unb2c/quartus/lofar2_unb2c_sdp_station_full/qsys_lofar2_unb2c_sdp_station.qsys applications/lofar2/designs/lofar2_unb2c_sdp_station/quartus
 
    lofar2 unb2b
+   . ls -lt build/unb2b/quartus/lofar2_unb2b_sdp_station_full_wg/ip/qsys_lofar2_unb2b_sdp_station/*.ip
    . cp build/unb2b/quartus/lofar2_unb2b_sdp_station_full_wg/ip/qsys_lofar2_unb2b_sdp_station/*.ip applications/lofar2/designs/lofar2_unb2b_sdp_station/quartus/ip/qsys_lofar2_unb2b_sdp_station/
    . cp build/unb2b/quartus/lofar2_unb2b_sdp_station_full_wg/qsys_lofar2_unb2b_sdp_station.qsys applications/lofar2/designs/lofar2_unb2b_sdp_station/quartus
 
-> Edit the hdllib.cfg of each revision to include the new peripheral ip files
+> Edit the quartus/lofar2_unb2c_sdp_station_ip.tcl to include the new peripheral ip files
 > The hdllib.cfg of each revision design will copy the qsys and ip files to each
   revision build quartus dir, so all revisions use the same qsys.