Skip to content
Snippets Groups Projects
Commit 1d816c47 authored by Paulus Kruger's avatar Paulus Kruger
Browse files

HBAT_BF_delays -> HBAT_BF_delay_steps

parent ea91b4a4
No related branches found
No related tags found
No related merge requests found
Pipeline #24786 passed
Stage: image
Show whitespace changes
Inline Side-by-side
config/RECVTR.yaml deleted 100644 → 0
+ 1
− 777
View file @ ea91b4a4
version: "1.0"
description: "1234"
drivers:
- name: I2C1 #TCA9548
type: i2c_switch
devreg: [0x70,0x71,0x72,0x73]
parameters: [1] #I2C port number
- name: I2C_RCU
type: i2c_array #An array of similar devices connected to an I2C switch
parent: I2C1
parameters: [20,22,0,2,4,6,10,12,14,16,18,24,26,28,30,8,7,5,3,1,23,21,19,13,11,9,15,17,31,29,27,25] #RCU lookup table
I2Ccut: 5 #error count to disable I2C (14 for LTS?)
status: RECVTR_I2C_error
- name: I2C_HBAT
type: hba1 #Special driver to manage HBAT1s.
parent: I2C_RCU
devreg: [0x40.0x10] #I2C broadcast register
parameters: [15] #PPS GPIO pin
- name: I2Cbb1
type: i2cbitbang1 #I2C bitbang via GPIO expander
devreg: [IO3.GPIO2,IO3.GPIO2,IO3.CONF2]
parameters: [5,6,6] #pins
parent: I2C_RCU
- name: I2Cbb2
type: i2cbitbang1
devreg: [IO3.GPIO2,IO3.GPIO2,IO3.CONF2]
parameters: [4,6,6]
parent: I2C_RCU
- name: I2Cbb3
type: i2cbitbang1
devreg: [IO3.GPIO2,IO3.GPIO2,IO3.CONF2]
parameters: [3,6,6]
parent: I2C_RCU
- name: SPIbb1
type: spibitbang1 #SPI bitbang via GPIO expander: CLK, SDIO, SDIOdir,CS
devreg: [IO3.GPIO1,IO3.GPIO1,IO3.CONF1,IO3.GPIO2]
parameters: [1,0,0,0]
parent: I2C_RCU
- name: SPIbb2
type: spibitbang1
devreg: [IO3.GPIO1,IO3.GPIO1,IO3.CONF1,IO3.GPIO2]
parameters: [3,2,2,1]
parent: I2C_RCU
- name: SPIbb3
type: spibitbang1
devreg: [IO3.GPIO1,IO3.GPIO1,IO3.CONF1,IO3.GPIO2]
parameters: [5,4,4,2]
parent: I2C_RCU
# - name: HBA_trigger
# type: gpio_hba_trigger
# parameters: [15] #PPS GPIO pin
# devreg: [0x40.0x10] #I2C broadcast register
# parent: I2C_RCU
#This is the I2C devices in the RCU
device_registers:
- name: IO
dim: 3
description: [IO-Expander for filter selection,IO-Expander for ON/OFF, Band, BUFx2,IO-Expander for ADC control]
address: [0x75,0x76,0x20]
device: [TCA9539,TCA9539,TCA6416]
driver: I2C1
registers:
- name: CONF1
description: Direction of port1
address: 6
store: True
- name: CONF2
description: Direction of port2
address: 7
store: True
- name: GPIO1
description: Input/Ouput port 1
address: [0,2] #Read / Write address different
store: True
- name: GPIO2
description: Input/Ouput port 2
address: [1,3]
store: True
- name: ROM
description: IO-Expander for filter selection
address: 0x50
driver: I2C1
registers:
- name: ID
description: Random
address: 0xfc
- name: Version
description: Set in production
address: 0
- name: Serial
address: 0x20
- name: AN
description: Monitor ADC on RCU
address: 0x74 #was 0x14 on RCU2-DIG PCBs
device: LTC2495
driver: I2C1
registers:
- name: V_1v8
address: 0xB080
- name: V_2v5
address: 0xB880
- name: V_3v3
address: 0xB180
- name: I_Ant0
address: 0xB980
- name: I_Ant1
address: 0xB280
- name: I_Ant2
address: 0xBA80
- name: V_Ant_I0
address: 0xB380
- name: V_Ant_O0
address: 0xBB80
- name: V_Ant_I1
address: 0xB480
- name: V_Ant_O1
address: 0xBC80
- name: V_Ant_I2
address: 0xB580
- name: V_Ant_O2
address: 0xBD80
- name: Temp
address: 0xA0C0
#This 'special' devices that uses I2C
- name: HB_UC
description: RCU microcontroller
address: 0x40
driver: I2C1
registers:
- name: ID
description: Device ID
address: 0
- name: HB_UC_update
description: RCU microcontroller
address: 0x40
driver: HBA_trigger
registers:
- name: wait_pps
address: 10
- name: HBAT
dim: 3
address: [0x41,0x42,0x43]
description: Virtual HBAT0 interface
driver: I2C_HBAT
registers:
- name: XY
address: 0x10
description: XY delay register
store: True
- name: Version
address: 127
description: HBAT server version
- name: ADC
dim: 3
description: ADC SPI control
device: AD9683
driver: [SPIbb1,SPIbb2,SPIbb3]
registers:
- name: PLL_stat
description: PLL locked status
address: 0x0A
- name: JESD_control1
description: JESD link control
address: 0x5F
- name: SYNC_control
address: 0x3A
- name: CML_level
description: CML output adjust
address: 0x15
- name: Update
description: Global device uptate
address: 0xFF
- name: DTH
dim: 3
description: CW dither source
device: SI4012
driver: [I2Cbb1,I2Cbb2,I2Cbb3]
address: 0x70
registers:
- name: Freq
description: Frequency
address: [0x1240,0x1140]
- name: Property
description: Properties
address: [0x12,0x11]
- name: State
address: [0x61,0x60]
- name: Start
description: Start CW
address: [0x62,0x62]
- name: Stop
description: Stop CW
address: [0x67,0x67]
- name: Rev
address: 0x10
- name: Tune
address: [0x1221,0x1121]
- name: CONF
address: [0x1210,0x1110]
variables:
- name: RECVTR_monitor_rate
description: Rate at which monitored points are polled (seconds)
driver: I2C_RCU
rw: variable
dtype: uint8
- name: ANT_mask
description: Only RF chains with a true mask is set
driver: I2C_RCU
rw: variable #server RW variable, not linked to IO
dtype: boolean
dim: 96
dim2: [3,32]
- name: RCU_mask
description: Only RCUs with a true mask is set
driver: I2C_RCU
rw: variable #server RW variable, not linked to IO
dtype: boolean
dim: 32
- name: RECVTR_I2C_error
description: 0=Good, >0 communication error
driver: I2C_RCU
rw: ro #server RW variable, not linked to IO
dtype: uint8
mask: RCU_mask
dim: 32
# - name: RCU_state
# description: State of RCUs 0=unknown, 1=ready, 2=busy, 3= wait PPS, 4=error
# driver: I2C_RCU
# rw: ro #server variable, not linked to IO
# dtype: uint8
# dim: 1
- name: RECVTR_translator_busy
description: True when I2C line is busy
rw: ro #server variable, not linked to IO
dtype: boolean
dim: 1
- name: RCU_attenuator_dB
description: RCU Attenuation (dB)
driver: I2C_RCU
devreg: [IO1.GPIO1,IO1.GPIO2,IO2.GPIO1]
bitoffset: [0,0,0]
width: 6
rw: rw
dtype: uint8
dim: 96
dim2: [3,32]
mask: ANT_mask
- name: RCU_band_select
description: Band select 1=10MHz,2=30MHz
driver: I2C_RCU
devreg: [IO2.GPIO2,IO2.GPIO2,IO2.GPIO2]
bitoffset: [0,2,4]
width: 2
rw: rw
dtype: uint8
dim: 96
dim2: [3,32]
mask: ANT_mask
- name: [RCU_IO1_GPIO1,RCU_IO1_GPIO2,RCU_IO2_GPIO1,RCU_IO2_GPIO2,RCU_IO3_GPIO1,RCU_IO3_GPIO2]
driver: I2C_RCU
devreg: [IO1.GPIO1,IO1.GPIO2,IO2.GPIO1,IO2.GPIO2,IO3.GPIO1,IO3.GPIO2]
width: 8
rw: ro
dtype: uint8
dim: 32
mask: RCU_mask
debug: True
- name: RCU_LED_red_on
driver: I2C_RCU
description: Red LED on front panel
devreg: IO2.GPIO2
bitoffset: 6
width: 1
rw: rw
dtype: boolean
convert_unit: bool_invert
dim: 32
mask: RCU_mask
- name: RCU_LED_green_on
driver: I2C_RCU
description: Green LED on front panel
devreg: IO2.GPIO2
bitoffset: 7
width: 1
rw: rw
dtype: boolean
convert_unit: bool_invert
dim: 32
mask: RCU_mask
- name: RCU_TEMP
description: RCU PCB Temperature (Celsius)
driver: I2C_RCU
devreg: AN.Temp
width: 23
scale: 3.827e-3 #T=DATAOUT * Vref/12.25/32. Vreg=1.5 V
convert_unit: Kelvin2Celsius
rw: ro
dtype: double
dim: 32
monitor: true
read_parallel: true
mask: RECVTR_I2C_error
- name: RCU_PWR_3V3
description: RCU 3.3V voltage (V)
driver: I2C_RCU
devreg: AN.V_3v3
width: 23
scale: 1.463e-6
rw: ro
dtype: double
dim: 32
read_parallel: true
monitor: true
mask: RECVTR_I2C_error
- name: RCU_PWR_1V8
description: RCU 1.8V voltage (V)
driver: I2C_RCU
devreg: AN.V_1v8
width: 23
scale: 7.1526e-7
rw: ro
dtype: double
dim: 32
read_parallel: true
monitor: true
mask: RECVTR_I2C_error
- name: RCU_PWR_2V5
description: RCU 2.5V voltage (V)
driver: I2C_RCU
devreg: AN.V_2v5
width: 23
scale: 7.1526e-7
rw: ro
dtype: double
dim: 32
read_parallel: true
monitor: true
mask: RECVTR_I2C_error
- name: RCU_PWR_ANT_VOUT
description: Voltage on antenna output of RCU (V). Controlled by ANT_PWR_ON.
driver: I2C_RCU
devreg: [AN.V_Ant_O0,AN.V_Ant_O1,AN.V_Ant_O2]
width: 23
scale: 2.7895e-6
rw: ro
dtype: double
dim: 96
dim2: [3,32]
read_parallel: true
monitor: true
mask: RECVTR_I2C_error
- name: RCU_PWR_ANT_VIN
description: RCU antenna voltage before switch (V)
driver: I2C_RCU
devreg: [AN.V_Ant_I0,AN.V_Ant_I1,AN.V_Ant_I2]
width: 23
scale: 2.7895e-6
rw: ro
dtype: double
dim: 96
dim2: [3,32]
read_parallel: true
monitor: true
mask: RECVTR_I2C_error
- name: RCU_PWR_ANT_IOUT
description: Current drawn on antenna output of RCU (A)
driver: I2C_RCU
devreg: [AN.I_Ant0,AN.I_Ant1,AN.I_Ant2]
width: 23
scale: 7.1526e-8
rw: ro
dtype: double
dim: 96
dim2: [3,32]
read_parallel: true
monitor: true
mask: RECVTR_I2C_error
- name: RCU_PWR_DIGITAL_on
description: RCU digital power enable. Controlled by calling RCU_on/RCU_off
driver: I2C_RCU
devreg: IO2.GPIO1
width: 1
bitoffset: 6
rw: ro
dtype: boolean
dim: 32
mask: RCU_mask
- name: RCU_PWR_good
description: Status of RCU power given by LDOs.
driver: I2C_RCU
devreg: IO2.GPIO1
width: 1
bitoffset: 7
rw: ro
dtype: boolean
dim: 32
monitor: true
mask: RECVTR_I2C_error
- name: RCU_PWR_ANALOG_on
description: RCU analog power enable. Controlled by RCU_on/off
driver: I2C_RCU
devreg: IO1.GPIO2
width: 1
bitoffset: 7
rw: ro
dtype: boolean
dim: 32
mask: RCU_mask
- name: RCU_DTH_shutdown
description: False means dither source powered on. Controlled by TBD
driver: I2C_RCU
devreg: [IO3.GPIO1,IO3.GPIO1,IO3.GPIO2]
width: 1
bitoffset: [7,6,7]
rw: rw
dtype: boolean
dim: 96
dim2: [3,32]
mask: ANT_mask
debug: True
- name: RCU_PWR_ANT_on
description: Antenna power output ON/OFF control. Monitored by Ant_VOUT.
driver: I2C_RCU
devreg: [IO1.GPIO1,IO1.GPIO1,IO1.GPIO2]
width: 1
bitoffset: [6,7,6]
rw: rw
dtype: boolean
dim: 96
dim2: [3,32]
mask: ANT_mask
- name: HBAT_BF_delays
description: HBAT1 frontend delays (0.5ns steps)
driver: I2C_HBAT
devreg: [HBAT1.XY,HBAT2.XY,HBAT3.XY]
bitoffset: [2,2,2]
width: 5
rw: rw
dtype: uint8
dim: 3072
dim2: [32,96]
mask: ANT_mask
wait: 100 #ms
- name: [HBAT_LED_on,HBAT_PWR_on,HBAT_PWR_LNA_on]
description: HBA frontend control
driver: I2C_HBAT
devreg: [HBAT1.XY,HBAT2.XY,HBAT3.XY]
bitoffset: [0,7,1]
width: 1
rw: rw
dtype: boolean
dim: 3072
dim2: [32,96]
mask: ANT_mask
wait: 100 #ms
- name: RCU_PCB_ID
description: Unique PCB ID
driver: I2C_RCU
devreg: ROM.ID
width: 32
rw: ro
dtype: uint32
dim: 32
mask: RCU_mask
- name: RCU_PCB_version
description: RCU version number
driver: I2C_RCU
devreg: ROM.Version
width: 0x80 #16 characters
rw: ro
dtype: string
dim: 32
mask: RCU_mask
- name: RCU_PCB_number
description: PCB number (astron.nl/webforms/IenS-Boarden/view.php?id=xxx)
driver: I2C_RCU
devreg: ROM.Serial
width: 0x80 #16 characters
rw: ro
dtype: string
dim: 32
mask: RCU_mask
- name: RCU_ADC_locked
description: RCU ADC lock status. May generated noise and polling disabled in future
driver: I2C_RCU
devreg: [ADC1.PLL_stat,ADC2.PLL_stat,ADC3.PLL_stat]
width: 1
rw: ro
dtype: boolean
dim: 96
dim2: [3,32]
monitor: true
- name: RCU_ADC_sync
driver: I2C_RCU
devreg: [ADC1.SYNC_control,ADC2.SYNC_control,ADC3.SYNC_control]
width: 8
rw: ro
dtype: uint8
dim: 96
dim2: [3,32]
debug: true
- name: RCU_ADC_JESD
driver: I2C_RCU
devreg: [ADC1.JESD_control1,ADC2.JESD_control1,ADC3.JESD_control1]
width: 8
rw: ro
dtype: uint8
dim: 96
dim2: [3,32]
debug: true
- name: RCU_ADC_CML_level
driver: I2C_RCU
devreg: [ADC1.CML_level,ADC2.CML_level,ADC3.CML_level]
width: 8
rw: ro
dtype: uint8
dim: 96
dim2: [3,32]
debug: true
- name: RCU_DTH_freq
description: RCU Dither source frequency (Hz). Should be around 102MHz.
driver: I2C_RCU
devreg: [DTH1.Freq,DTH2.Freq,DTH3.Freq]
width: 32
rw: rw
dtype: uint32
dim: 96
dim2: [3,32]
mask: ANT_mask
- name: RCU_DTH_tune
driver: I2C_RCU
devreg: [DTH1.Tune,DTH2.Tune,DTH3.Tune]
width: 16
rw: rw
dtype: uint32
dim: 96
dim2: [3,32]
mask: ANT_mask
debug: true
- name: RCU_DTH_config
driver: I2C_RCU
devreg: [DTH1.CONF,DTH2.CONF,DTH3.CONF]
width: 8
rw: rw
dtype: uint32
dim: 96
dim2: [3,32]
mask: ANT_mask
debug: true
- name: RCU_DTH_on
description: RCU Dither on. Controlled by RCU_DTH_on/off
driver: I2C_RCU
devreg: [DTH1.State,DTH2.State,DTH3.State]
width: 1 #read only first of 2 bytes
bitoffset: [1,1,1]
rw: ro
dtype: boolean
dim: 96
dim2: [3,32]
mask: ANT_mask
- name: RCU_DTH_Rev
driver: I2C_RCU
devreg: [DTH1.Rev,DTH2.Rev,DTH3.Rev]
width: 88
rw: rw
dtype: uint32
dim: 96
dim2: [3,32]
mask: ANT_mask
debug: true
methods:
- name: RECVTR_Init #Called after startup to load. Should have all stored registers
driver: I2C_RCU
debug: True
instructions:
- RCU_IO1_GPIO1: Update
- RCU_IO1_GPIO2: Update
- RCU_IO2_GPIO1: Update
- RCU_IO2_GPIO2: Update
- RCU_IO3_GPIO1: Update
- RCU_IO3_GPIO2: Update
# - IO1.GPIO2: Update
# - IO2.GPIO1: Update
# - IO2.GPIO2: Update
# - IO3.GPIO1: Update
# - IO3.GPIO2: Update
- IO3.CONF1: Update
- RCU_update: 0
- name: RCU_on
description: Initialize RCU and it in the ON state
driver: I2C_RCU
mask: RCU_mask
instructions:
- RECVTR_I2C_error: 0
- IO2.CONF1: 0x80 #Pgood on 0x80
- IO2.GPIO1: 0x4A #0x40 Dig on, 0x0a =10dB att
- IO2.GPIO2: 0x55 #0x15 #Band0 (or 0x2a band 1) #LED green=on=low
- IO3.GPIO1: 0x15 #ADC_SDIO=high, clk=low, DTH_EN=low
- IO3.GPIO2: 0x47 #ADC SC=high, DTH_SDA=high
- IO1.GPIO1: 0x0A #0x0a = 10dB att
- IO1.GPIO2: 0x8A #0x80 Analog on, 0x0a=10dB att
- IO2.CONF2: 0
- IO3.CONF1: 0
- IO3.CONF2: 0
- IO1.CONF1: 0
- IO1.CONF2: 0
# - RCU_GPIO1: Update
# - RCU_GPIO2: Update
# - RCU_attenuator: [10,10,10] #Set OPC-UA variable
- WAIT: 500 #ms to wait
- ADC1_on: 0 #call another opc-ua method
- ADC2_on: 0
- ADC3_on: 0
- WAIT: 500 #ms to wait
- RCU_update: 0
- name: RCU_update
driver: I2C_RCU
mask: RCU_mask
debug: True
instructions:
- RCU_PWR_DIGITAL_on: Update #Read value and update the OPC-UA variable
- RCU_PWR_ANALOG_on: Update
- RCU_PWR_ANT_on: Update
- RCU_PCB_ID: Update
- RCU_PCB_version: Update
- RCU_PCB_number: Update
- RCU_LED_red_on: Update
- RCU_LED_green_on: Update
- RCU_attenuator_dB: Update
- RCU_band_select: Update
- RCU_ADC_locked: Update
- RCU_ADC_sync: Update
- RCU_DTH_shutdown: Update
- RCU_DTH_freq: Update
- RCU_DTH_on: Update
- name: ADC1_on
driver: I2C_RCU
debug: True
# rw: hidden
instructions:
- ADC1.JESD_control1 : 0x14
- ADC1.SYNC_control: 1 #Setup ADCs
- ADC1.CML_level: 0x7
- ADC1.Update: 1 #Needed to update ADC registers
- name: ADC2_on
driver: I2C_RCU
debug: True
# rw: hidden
instructions:
- ADC2.JESD_control1 : 0x14
- ADC2.SYNC_control: 1 #Setup ADCs
- ADC2.CML_level: 0x7
- ADC2.Update: 1 #Needed to update ADC registers
- name: ADC3_on
driver: I2C_RCU
debug: True
# rw: hidden
instructions:
- ADC3.JESD_control1 : 0x14
- ADC3.SYNC_control: 1 #Setup ADCs
- ADC3.CML_level: 0x7
- ADC3.Update: 1 #Needed to update ADC registers
- name: RCU_off
description: Put RCU in low-power state
driver: I2C_RCU
mask: RCU_mask
instructions:
- RECVTR_I2C_error: 0
- RCU_PWR_ANALOG_on: 0 #Switch power off
- RCU_PWR_DIGITAL_on: 0 #Switch power off
- IO2.GPIO1: 0
- IO2.GPIO2: 0
- IO3.GPIO1: 0
- IO3.GPIO2: 0
- IO1.GPIO1: 0
- IO1.GPIO2: 0
- RCU_update: 0
#todo, also make all GPIO pins (except power enables) inputs to remove all power from devices.
- name: RCU_HBAT_WAIT_PPS
driver: I2C_RCU
mask: RCU_mask
debug: True
instructions:
- RCU_state: 3
- HB_UC_update.wait_pps : 1
- RCU_state: 1
- name: RCU_DTH_on
description: Switch dither source on
driver: I2C_RCU
mask: RCU_mask
# rw: hidden
instructions:
- RCU_DTH_config : [0,0,0]
- RCU_DTH_config: Update #debug
- DTH1.Tune : [0,0] #no tuning
- DTH2.Tune : [0,0] #no tuning
- DTH3.Tune : [0,0] #no tuning
- RCU_DTH_tune: Update #debug
- DTH1.Start : [0,1,0,0,1]
- DTH2.Start : [0,1,0,0,1]
- DTH3.Start : [0,1,0,0,1]
- RCU_DTH_on : Update
- name: RCU_DTH_off
description: Switch dither source off
driver: I2C_RCU
mask: RCU_mask
# rw: hidden
instructions:
# - RCU_DTH_SHUTDOWN : [1,1,1]
# - WAIT: 100
# - RCU_DTH_SHUTDOWN : [0,0,0]
# - RCU_DTH_SHUTDOWN : 1
- DTH1.Stop : [0,0]
- DTH2.Stop : [0,0]
- DTH3.Stop : [0,0]
# - DTH1.State : [0,0]
# - DTH2.State : [0,0]
# - DTH3.State : [0,0]
- RCU_DTH_on: Update
config/RECVTR.yaml 0 → 120000
+ 1
− 777
View file @ 1d816c47
RECVTR_HB.yaml
\ No newline at end of file
config/RECVTR_HB.yaml
+ 1
− 1
View file @ 1d816c47
......@@ -475,7 +475,7 @@ variables:
dim2: [3,32]
mask: ANT_mask
- name: HBAT_BF_delays
- name: HBAT_BF_delay_steps
description: HBAT1 frontend delays (0.5ns steps)
driver: I2C_HBAT
devreg: [HBAT1.XY,HBAT2.XY,HBAT3.XY]
......
config/RECVTR_LB.yaml
+ 1
− 1
View file @ 1d816c47
......@@ -469,7 +469,7 @@ variables:
dim2: [3,32]
mask: ANT_mask
- name: HBAT_BF_delays
- name: HBAT_BF_delay_steps
description: HBAT1 frontend delays (0.5ns steps)
driver: I2C_HBAT
devreg: [HBAT1.XY,HBAT2.XY,HBAT3.XY]
......
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Please register or to comment