diff --git a/libraries/technology/ip_arria10/ddr4_4g_2000/compile_ip.tcl b/libraries/technology/ip_arria10/ddr4_4g_2000/compile_ip.tcl
new file mode 100644
index 0000000000000000000000000000000000000000..f95c590f229ef4a5db517bedc1d8be092adbf294
--- /dev/null
+++ b/libraries/technology/ip_arria10/ddr4_4g_2000/compile_ip.tcl
@@ -0,0 +1,65 @@
+#------------------------------------------------------------------------------
+#
+# Copyright (C) 2015
+# ASTRON (Netherlands Institute for Radio Astronomy) <http://www.astron.nl/>
+# JIVE (Joint Institute for VLBI in Europe) <http://www.jive.nl/>
+# P.O.Box 2, 7990 AA Dwingeloo, The Netherlands
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+#------------------------------------------------------------------------------
+
+# This file is based on generated file generated/sim/mentor/msim_setup.tcl
+# - the values for modelsim_search_libraries key in the hdllib.cfg follow from altera libraries vmap section in the msim_setup.tcl
+# - vmap for the IP specific libraries and compile all IP source files into those libraries similar as in the msim_setup.tcl
+# - replace QSYS_SIMDIR by IP_DIR
+
+set IP_DIR "$env(RADIOHDL)/libraries/technology/ip_arria10/ddr4_4g_2000/generated/sim"
+
+#vlib ./work/ ;# Assume library work already exists
+
+vmap ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150 ./work/
+vmap ip_arria10_ddr4_4g_2000_altera_emif_150 ./work/
+
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150_mhuabmq.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_emif_arch_nf_top.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_emif_arch_nf_bufs.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_emif_arch_nf_buf_udir_se_i.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_emif_arch_nf_buf_udir_se_o.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_emif_arch_nf_buf_udir_df_i.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_emif_arch_nf_buf_udir_df_o.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_emif_arch_nf_buf_udir_cp_i.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_emif_arch_nf_buf_bdir_df.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_emif_arch_nf_buf_bdir_se.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_emif_arch_nf_buf_unused.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_emif_arch_nf_pll.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_emif_arch_nf_pll_fast_sim.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_emif_arch_nf_pll_extra_clks.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_emif_arch_nf_oct.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_emif_arch_nf_core_clks_rsts.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_emif_arch_nf_hps_clks_rsts.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_emif_arch_nf_io_aux.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_emif_arch_nf_io_tiles.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_emif_arch_nf_hmc_avl_if.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_emif_arch_nf_hmc_sideband_if.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_emif_arch_nf_hmc_mmr_if.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_emif_arch_nf_hmc_amm_data_if.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_emif_arch_nf_hmc_ast_data_if.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_emif_arch_nf_afi_if.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_emif_arch_nf_seq_if.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_emif_arch_nf_regs.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_oct.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog -sv "$IP_DIR/../altera_emif_arch_nf_150/sim/altera_oct_um_fsm.sv" -work ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150
+ vlog "$IP_DIR/../altera_emif_150/sim/ip_arria10_ddr4_4g_2000_altera_emif_150_livuhtq.v" -work ip_arria10_ddr4_4g_2000_altera_emif_150
+ vcom "$IP_DIR/ip_arria10_ddr4_4g_2000.vhd"
diff --git a/libraries/technology/ip_arria10/ddr4_4g_2000/copy_hex_files.tcl b/libraries/technology/ip_arria10/ddr4_4g_2000/copy_hex_files.tcl
new file mode 100644
index 0000000000000000000000000000000000000000..562340ef4a3372ebdae0727543acd3fefc48ab96
--- /dev/null
+++ b/libraries/technology/ip_arria10/ddr4_4g_2000/copy_hex_files.tcl
@@ -0,0 +1,33 @@
+#------------------------------------------------------------------------------
+#
+# Copyright (C) 2015
+# ASTRON (Netherlands Institute for Radio Astronomy) <http://www.astron.nl/>
+# JIVE (Joint Institute for VLBI in Europe) <http://www.jive.nl/>
+# P.O.Box 2, 7990 AA Dwingeloo, The Netherlands
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+#------------------------------------------------------------------------------
+
+# This file is based on Qsys-generated file generated/sim/mentor/msim_setup.tcl
+
+set IP_DIR "$env(RADIOHDL)/libraries/technology/ip_arria10/ddr4_4g_2000/generated/sim"
+
+# Copy ROM/RAM files to simulation directory
+if {[file isdirectory $IP_DIR]} {
+ file copy -force $IP_DIR/../altera_emif_arch_nf_150/sim/ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150_mhuabmq_seq_cal_sim.hex ./
+ file copy -force $IP_DIR/../altera_emif_arch_nf_150/sim/ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150_mhuabmq_seq_cal_synth.hex ./
+ file copy -force $IP_DIR/../altera_emif_arch_nf_150/sim/ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150_mhuabmq_seq_params_sim.hex ./
+ file copy -force $IP_DIR/../altera_emif_arch_nf_150/sim/ip_arria10_ddr4_4g_2000_altera_emif_arch_nf_150_mhuabmq_seq_params_synth.hex ./
+}
diff --git a/libraries/technology/ip_arria10/ddr4_4g_2000/generate_ip.sh b/libraries/technology/ip_arria10/ddr4_4g_2000/generate_ip.sh
new file mode 100755
index 0000000000000000000000000000000000000000..ee4f6f3fb14d080c4c4dea86b892685c322f1510
--- /dev/null
+++ b/libraries/technology/ip_arria10/ddr4_4g_2000/generate_ip.sh
@@ -0,0 +1,54 @@
+#!/bin/bash
+# -------------------------------------------------------------------------- #
+#
+# Copyright (C) 2014
+# ASTRON (Netherlands Institute for Radio Astronomy) <http://www.astron.nl/>
+# JIVE (Joint Institute for VLBI in Europe) <http://www.jive.nl/>
+# P.O.Box 2, 7990 AA Dwingeloo, The Netherlands
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+# -------------------------------------------------------------------------- #
+#
+# Purpose: Generate IP with Qsys
+# Description:
+# Generate the IP in a separate generated/ subdirectory.
+#
+# Usage:
+#
+# ./generate_ip.sh
+#
+
+# Tool settings for selected target "unb2" with arria10
+. ${RADIOHDL}/tools/quartus/set_quartus unb2
+
+#qsys-generate --help
+
+# Only generate the source IP
+# - use --synthesis=VHDL to have top level in VHDL similar as with MegaWizard
+qsys-generate ip_arria10_ddr4_4g_2000.qsys \
+ --synthesis=VHDL \
+ --simulation=VHDL \
+ --output-directory=generated \
+ --allow-mixed-language-simulation
+
+# Also generate the testbench IP, this is not useful because it only generates bus functional models, so not a DDR4 memory model
+#qsys-generate ip_arria10_ddr4_4g_2000.qsys \
+# --synthesis=VHDL \
+# --simulation=VHDL \
+# --testbench=STANDARD \
+# --testbench-simulation=VHDL \
+# --output-directory=generated \
+# --allow-mixed-language-simulation \
+# --allow-mixed-language-testbench-simulation
diff --git a/libraries/technology/ip_arria10/ddr4_4g_2000/hdllib.cfg b/libraries/technology/ip_arria10/ddr4_4g_2000/hdllib.cfg
new file mode 100644
index 0000000000000000000000000000000000000000..c9c12814e63d7b9e334d62da04e703eb47aa929d
--- /dev/null
+++ b/libraries/technology/ip_arria10/ddr4_4g_2000/hdllib.cfg
@@ -0,0 +1,16 @@
+hdl_lib_name = ip_arria10_ddr4_4g_2000
+hdl_library_clause_name = ip_arria10_ddr4_4g_2000_altera_emif_150
+hdl_lib_uses_synth =
+hdl_lib_uses_sim =
+
+hdl_lib_technology = ip_arria10
+
+modelsim_compile_ip_files =
+ $RADIOHDL/libraries/technology/ip_arria10/ddr4_4g_2000/compile_ip.tcl
+
+synth_files =
+
+test_bench_files =
+
+quartus_qip_files =
+ generated/ip_arria10_ddr4_4g_2000.qip
diff --git a/libraries/technology/ip_arria10/ddr4_4g_2000/ip_arria10_ddr4_4g_2000.qsys b/libraries/technology/ip_arria10/ddr4_4g_2000/ip_arria10_ddr4_4g_2000.qsys
new file mode 100644
index 0000000000000000000000000000000000000000..ecdb06a69fa6a3e69f5c3af27caa54dba621167b
--- /dev/null
+++ b/libraries/technology/ip_arria10/ddr4_4g_2000/ip_arria10_ddr4_4g_2000.qsys
@@ -0,0 +1,837 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<system name="$${FILENAME}">
+ <component
+ name="$${FILENAME}"
+ displayName="$${FILENAME}"
+ version="1.0"
+ description=""
+ tags="INTERNAL_COMPONENT=true"
+ categories="System" />
+ <parameter name="bonusData"><![CDATA[bonusData
+{
+ element $${FILENAME}
+ {
+ datum _originalDeviceFamily
+ {
+ value = "Arria 10";
+ type = "String";
+ }
+ }
+ element emif_0
+ {
+ datum _sortIndex
+ {
+ value = "0";
+ type = "int";
+ }
+ }
+}
+]]></parameter>
+ <parameter name="clockCrossingAdapter" value="HANDSHAKE" />
+ <parameter name="device" value="10AX115U4F45I3SGES" />
+ <parameter name="deviceFamily" value="Arria 10" />
+ <parameter name="deviceSpeedGrade" value="3" />
+ <parameter name="fabricMode" value="QSYS" />
+ <parameter name="generateLegacySim" value="false" />
+ <parameter name="generationId" value="0" />
+ <parameter name="globalResetBus" value="false" />
+ <parameter name="hdlLanguage" value="VERILOG" />
+ <parameter name="hideFromIPCatalog" value="true" />
+ <parameter name="lockedInterfaceDefinition" value="" />
+ <parameter name="maxAdditionalLatency" value="1" />
+ <parameter name="projectName" value="" />
+ <parameter name="sopcBorderPoints" value="false" />
+ <parameter name="systemHash" value="0" />
+ <parameter name="testBenchDutName" value="" />
+ <parameter name="timeStamp" value="0" />
+ <parameter name="useTestBenchNamingPattern" value="false" />
+ <instanceScript></instanceScript>
+ <interface
+ name="ctrl_amm_0"
+ internal="emif_0.ctrl_amm_0"
+ type="avalon"
+ dir="end">
+ <port name="amm_ready_0" internal="amm_ready_0" />
+ <port name="amm_read_0" internal="amm_read_0" />
+ <port name="amm_write_0" internal="amm_write_0" />
+ <port name="amm_address_0" internal="amm_address_0" />
+ <port name="amm_readdata_0" internal="amm_readdata_0" />
+ <port name="amm_writedata_0" internal="amm_writedata_0" />
+ <port name="amm_burstcount_0" internal="amm_burstcount_0" />
+ <port name="amm_byteenable_0" internal="amm_byteenable_0" />
+ <port name="amm_readdatavalid_0" internal="amm_readdatavalid_0" />
+ </interface>
+ <interface name="ctrl_mmr_slave_0" internal="emif_0.ctrl_mmr_slave_0" />
+ <interface
+ name="emif_usr_clk"
+ internal="emif_0.emif_usr_clk"
+ type="clock"
+ dir="start">
+ <port name="emif_usr_clk" internal="emif_usr_clk" />
+ </interface>
+ <interface
+ name="emif_usr_reset_n"
+ internal="emif_0.emif_usr_reset_n"
+ type="reset"
+ dir="start">
+ <port name="emif_usr_reset_n" internal="emif_usr_reset_n" />
+ </interface>
+ <interface
+ name="global_reset_n"
+ internal="emif_0.global_reset_n"
+ type="reset"
+ dir="end">
+ <port name="global_reset_n" internal="global_reset_n" />
+ </interface>
+ <interface name="mem" internal="emif_0.mem" type="conduit" dir="end">
+ <port name="mem_ck" internal="mem_ck" />
+ <port name="mem_ck_n" internal="mem_ck_n" />
+ <port name="mem_a" internal="mem_a" />
+ <port name="mem_act_n" internal="mem_act_n" />
+ <port name="mem_ba" internal="mem_ba" />
+ <port name="mem_bg" internal="mem_bg" />
+ <port name="mem_cke" internal="mem_cke" />
+ <port name="mem_cs_n" internal="mem_cs_n" />
+ <port name="mem_odt" internal="mem_odt" />
+ <port name="mem_reset_n" internal="mem_reset_n" />
+ <port name="mem_par" internal="mem_par" />
+ <port name="mem_alert_n" internal="mem_alert_n" />
+ <port name="mem_dqs" internal="mem_dqs" />
+ <port name="mem_dqs_n" internal="mem_dqs_n" />
+ <port name="mem_dq" internal="mem_dq" />
+ <port name="mem_dbi_n" internal="mem_dbi_n" />
+ </interface>
+ <interface name="oct" internal="emif_0.oct" type="conduit" dir="end">
+ <port name="oct_rzqin" internal="oct_rzqin" />
+ </interface>
+ <interface
+ name="pll_ref_clk"
+ internal="emif_0.pll_ref_clk"
+ type="clock"
+ dir="end">
+ <port name="pll_ref_clk" internal="pll_ref_clk" />
+ </interface>
+ <interface name="status" internal="emif_0.status" type="conduit" dir="end">
+ <port name="local_cal_success" internal="local_cal_success" />
+ <port name="local_cal_fail" internal="local_cal_fail" />
+ </interface>
+ <module
+ name="emif_0"
+ kind="altera_emif"
+ version="15.0"
+ enabled="1"
+ autoexport="1">
+ <parameter name="BOARD_DDR3_AC_TO_CK_SKEW_NS" value="0.0" />
+ <parameter name="BOARD_DDR3_BRD_SKEW_WITHIN_AC_NS" value="0.02" />
+ <parameter name="BOARD_DDR3_BRD_SKEW_WITHIN_DQS_NS" value="0.02" />
+ <parameter name="BOARD_DDR3_DQS_TO_CK_SKEW_NS" value="0.02" />
+ <parameter name="BOARD_DDR3_IS_SKEW_WITHIN_AC_DESKEWED" value="true" />
+ <parameter name="BOARD_DDR3_IS_SKEW_WITHIN_DQS_DESKEWED" value="false" />
+ <parameter name="BOARD_DDR3_MAX_CK_DELAY_NS" value="0.6" />
+ <parameter name="BOARD_DDR3_MAX_DQS_DELAY_NS" value="0.6" />
+ <parameter name="BOARD_DDR3_PKG+BRD_SKEW_WITHIN_AC_NS" value="0.02" />
+ <parameter name="BOARD_DDR3_PKG+BRD_SKEW_WITHIN_DQS_NS" value="0.02" />
+ <parameter name="BOARD_DDR3_SKEW_BETWEEN_DIMMS_NS" value="0.05" />
+ <parameter name="BOARD_DDR3_SKEW_BETWEEN_DQS_NS" value="0.02" />
+ <parameter name="BOARD_DDR3_USER_AC_ISI_NS" value="0.0" />
+ <parameter name="BOARD_DDR3_USER_AC_SLEW_RATE" value="2.0" />
+ <parameter name="BOARD_DDR3_USER_CK_SLEW_RATE" value="4.0" />
+ <parameter name="BOARD_DDR3_USER_RCLK_ISI_NS" value="0.0" />
+ <parameter name="BOARD_DDR3_USER_RCLK_SLEW_RATE" value="5.0" />
+ <parameter name="BOARD_DDR3_USER_RDATA_ISI_NS" value="0.0" />
+ <parameter name="BOARD_DDR3_USER_RDATA_SLEW_RATE" value="2.5" />
+ <parameter name="BOARD_DDR3_USER_WCLK_ISI_NS" value="0.0" />
+ <parameter name="BOARD_DDR3_USER_WCLK_SLEW_RATE" value="4.0" />
+ <parameter name="BOARD_DDR3_USER_WDATA_ISI_NS" value="0.0" />
+ <parameter name="BOARD_DDR3_USER_WDATA_SLEW_RATE" value="2.0" />
+ <parameter name="BOARD_DDR3_USE_DEFAULT_ISI_VALUES" value="true" />
+ <parameter name="BOARD_DDR3_USE_DEFAULT_SLEW_RATES" value="true" />
+ <parameter name="BOARD_DDR4_AC_TO_CK_SKEW_NS" value="0.013" />
+ <parameter name="BOARD_DDR4_BRD_SKEW_WITHIN_AC_NS" value="0.146" />
+ <parameter name="BOARD_DDR4_BRD_SKEW_WITHIN_DQS_NS" value="0.03" />
+ <parameter name="BOARD_DDR4_DQS_TO_CK_SKEW_NS" value="-0.21" />
+ <parameter name="BOARD_DDR4_IS_SKEW_WITHIN_AC_DESKEWED" value="false" />
+ <parameter name="BOARD_DDR4_IS_SKEW_WITHIN_DQS_DESKEWED" value="false" />
+ <parameter name="BOARD_DDR4_MAX_CK_DELAY_NS" value="0.252" />
+ <parameter name="BOARD_DDR4_MAX_DQS_DELAY_NS" value="0.323" />
+ <parameter name="BOARD_DDR4_PKG+BRD_SKEW_WITHIN_AC_NS" value="0.02" />
+ <parameter name="BOARD_DDR4_PKG+BRD_SKEW_WITHIN_DQS_NS" value="0.072" />
+ <parameter name="BOARD_DDR4_SKEW_BETWEEN_DIMMS_NS" value="0.0" />
+ <parameter name="BOARD_DDR4_SKEW_BETWEEN_DQS_NS" value="0.133" />
+ <parameter name="BOARD_DDR4_USER_AC_ISI_NS" value="0.0" />
+ <parameter name="BOARD_DDR4_USER_AC_SLEW_RATE" value="2.0" />
+ <parameter name="BOARD_DDR4_USER_CK_SLEW_RATE" value="4.0" />
+ <parameter name="BOARD_DDR4_USER_RCLK_ISI_NS" value="0.0" />
+ <parameter name="BOARD_DDR4_USER_RCLK_SLEW_RATE" value="8.0" />
+ <parameter name="BOARD_DDR4_USER_RDATA_ISI_NS" value="0.0" />
+ <parameter name="BOARD_DDR4_USER_RDATA_SLEW_RATE" value="4.0" />
+ <parameter name="BOARD_DDR4_USER_WCLK_ISI_NS" value="0.0" />
+ <parameter name="BOARD_DDR4_USER_WCLK_SLEW_RATE" value="4.0" />
+ <parameter name="BOARD_DDR4_USER_WDATA_ISI_NS" value="0.0" />
+ <parameter name="BOARD_DDR4_USER_WDATA_SLEW_RATE" value="2.0" />
+ <parameter name="BOARD_DDR4_USE_DEFAULT_ISI_VALUES" value="true" />
+ <parameter name="BOARD_DDR4_USE_DEFAULT_SLEW_RATES" value="false" />
+ <parameter name="BOARD_QDR2_AC_TO_K_SKEW_NS" value="0.0" />
+ <parameter name="BOARD_QDR2_BRD_SKEW_WITHIN_AC_NS" value="0.02" />
+ <parameter name="BOARD_QDR2_BRD_SKEW_WITHIN_D_NS" value="0.02" />
+ <parameter name="BOARD_QDR2_BRD_SKEW_WITHIN_Q_NS" value="0.02" />
+ <parameter name="BOARD_QDR2_IS_SKEW_WITHIN_AC_DESKEWED" value="true" />
+ <parameter name="BOARD_QDR2_IS_SKEW_WITHIN_D_DESKEWED" value="false" />
+ <parameter name="BOARD_QDR2_IS_SKEW_WITHIN_Q_DESKEWED" value="false" />
+ <parameter name="BOARD_QDR2_MAX_K_DELAY_NS" value="0.6" />
+ <parameter name="BOARD_QDR2_PKG+BRD_SKEW_WITHIN_AC_NS" value="0.02" />
+ <parameter name="BOARD_QDR2_PKG+BRD_SKEW_WITHIN_D_NS" value="0.02" />
+ <parameter name="BOARD_QDR2_PKG+BRD_SKEW_WITHIN_Q_NS" value="0.02" />
+ <parameter name="BOARD_QDR2_SKEW_BETWEEN_DIMMS_NS" value="0.05" />
+ <parameter name="BOARD_QDR2_USER_AC_ISI_NS" value="0.0" />
+ <parameter name="BOARD_QDR2_USER_AC_SLEW_RATE" value="2.0" />
+ <parameter name="BOARD_QDR2_USER_K_SLEW_RATE" value="4.0" />
+ <parameter name="BOARD_QDR2_USER_RCLK_ISI_NS" value="0.0" />
+ <parameter name="BOARD_QDR2_USER_RCLK_SLEW_RATE" value="4.0" />
+ <parameter name="BOARD_QDR2_USER_RDATA_ISI_NS" value="0.0" />
+ <parameter name="BOARD_QDR2_USER_RDATA_SLEW_RATE" value="2.0" />
+ <parameter name="BOARD_QDR2_USER_WCLK_ISI_NS" value="0.0" />
+ <parameter name="BOARD_QDR2_USER_WDATA_ISI_NS" value="0.0" />
+ <parameter name="BOARD_QDR2_USER_WDATA_SLEW_RATE" value="2.0" />
+ <parameter name="BOARD_QDR2_USE_DEFAULT_ISI_VALUES" value="true" />
+ <parameter name="BOARD_QDR2_USE_DEFAULT_SLEW_RATES" value="true" />
+ <parameter name="BOARD_QDR4_AC_TO_CK_SKEW_NS" value="0.0" />
+ <parameter name="BOARD_QDR4_BRD_SKEW_WITHIN_AC_NS" value="0.02" />
+ <parameter name="BOARD_QDR4_BRD_SKEW_WITHIN_QK_NS" value="0.02" />
+ <parameter name="BOARD_QDR4_DK_TO_CK_SKEW_NS" value="-0.02" />
+ <parameter name="BOARD_QDR4_IS_SKEW_WITHIN_AC_DESKEWED" value="true" />
+ <parameter name="BOARD_QDR4_IS_SKEW_WITHIN_QK_DESKEWED" value="false" />
+ <parameter name="BOARD_QDR4_MAX_CK_DELAY_NS" value="0.6" />
+ <parameter name="BOARD_QDR4_MAX_DK_DELAY_NS" value="0.6" />
+ <parameter name="BOARD_QDR4_PKG+BRD_SKEW_WITHIN_AC_NS" value="0.02" />
+ <parameter name="BOARD_QDR4_PKG+BRD_SKEW_WITHIN_QK_NS" value="0.02" />
+ <parameter name="BOARD_QDR4_SKEW_BETWEEN_DIMMS_NS" value="0.05" />
+ <parameter name="BOARD_QDR4_SKEW_BETWEEN_DK_NS" value="0.02" />
+ <parameter name="BOARD_QDR4_USER_AC_ISI_NS" value="0.0" />
+ <parameter name="BOARD_QDR4_USER_AC_SLEW_RATE" value="2.0" />
+ <parameter name="BOARD_QDR4_USER_CK_SLEW_RATE" value="4.0" />
+ <parameter name="BOARD_QDR4_USER_RCLK_ISI_NS" value="0.0" />
+ <parameter name="BOARD_QDR4_USER_RCLK_SLEW_RATE" value="5.0" />
+ <parameter name="BOARD_QDR4_USER_RDATA_ISI_NS" value="0.0" />
+ <parameter name="BOARD_QDR4_USER_RDATA_SLEW_RATE" value="2.5" />
+ <parameter name="BOARD_QDR4_USER_WCLK_ISI_NS" value="0.0" />
+ <parameter name="BOARD_QDR4_USER_WCLK_SLEW_RATE" value="4.0" />
+ <parameter name="BOARD_QDR4_USER_WDATA_ISI_NS" value="0.0" />
+ <parameter name="BOARD_QDR4_USER_WDATA_SLEW_RATE" value="2.0" />
+ <parameter name="BOARD_QDR4_USE_DEFAULT_ISI_VALUES" value="true" />
+ <parameter name="BOARD_QDR4_USE_DEFAULT_SLEW_RATES" value="true" />
+ <parameter name="BOARD_RLD3_AC_TO_CK_SKEW_NS" value="0.0" />
+ <parameter name="BOARD_RLD3_BRD_SKEW_WITHIN_AC_NS" value="0.02" />
+ <parameter name="BOARD_RLD3_BRD_SKEW_WITHIN_QK_NS" value="0.02" />
+ <parameter name="BOARD_RLD3_DK_TO_CK_SKEW_NS" value="-0.02" />
+ <parameter name="BOARD_RLD3_IS_SKEW_WITHIN_AC_DESKEWED" value="true" />
+ <parameter name="BOARD_RLD3_IS_SKEW_WITHIN_QK_DESKEWED" value="false" />
+ <parameter name="BOARD_RLD3_MAX_CK_DELAY_NS" value="0.6" />
+ <parameter name="BOARD_RLD3_MAX_DK_DELAY_NS" value="0.6" />
+ <parameter name="BOARD_RLD3_PKG+BRD_SKEW_WITHIN_AC_NS" value="0.02" />
+ <parameter name="BOARD_RLD3_PKG+BRD_SKEW_WITHIN_QK_NS" value="0.02" />
+ <parameter name="BOARD_RLD3_SKEW_BETWEEN_DIMMS_NS" value="0.05" />
+ <parameter name="BOARD_RLD3_SKEW_BETWEEN_DK_NS" value="0.02" />
+ <parameter name="BOARD_RLD3_USER_AC_ISI_NS" value="0.0" />
+ <parameter name="BOARD_RLD3_USER_AC_SLEW_RATE" value="2.0" />
+ <parameter name="BOARD_RLD3_USER_CK_SLEW_RATE" value="4.0" />
+ <parameter name="BOARD_RLD3_USER_RCLK_ISI_NS" value="0.0" />
+ <parameter name="BOARD_RLD3_USER_RCLK_SLEW_RATE" value="7.0" />
+ <parameter name="BOARD_RLD3_USER_RDATA_ISI_NS" value="0.0" />
+ <parameter name="BOARD_RLD3_USER_RDATA_SLEW_RATE" value="3.5" />
+ <parameter name="BOARD_RLD3_USER_WCLK_ISI_NS" value="0.0" />
+ <parameter name="BOARD_RLD3_USER_WCLK_SLEW_RATE" value="4.0" />
+ <parameter name="BOARD_RLD3_USER_WDATA_ISI_NS" value="0.0" />
+ <parameter name="BOARD_RLD3_USER_WDATA_SLEW_RATE" value="2.0" />
+ <parameter name="BOARD_RLD3_USE_DEFAULT_ISI_VALUES" value="true" />
+ <parameter name="BOARD_RLD3_USE_DEFAULT_SLEW_RATES" value="true" />
+ <parameter name="CAL_DEBUG_CLOCK_FREQUENCY" value="50000000" />
+ <parameter name="CTRL_DDR3_ADDR_ORDER_ENUM">DDR3_CTRL_ADDR_ORDER_CS_R_B_C</parameter>
+ <parameter name="CTRL_DDR3_AUTO_POWER_DOWN_CYCS" value="32" />
+ <parameter name="CTRL_DDR3_AUTO_POWER_DOWN_EN" value="false" />
+ <parameter name="CTRL_DDR3_AUTO_PRECHARGE_EN" value="false" />
+ <parameter name="CTRL_DDR3_AVL_PROTOCOL_ENUM">CTRL_AVL_PROTOCOL_MM</parameter>
+ <parameter name="CTRL_DDR3_ECC_AUTO_CORRECTION_EN" value="false" />
+ <parameter name="CTRL_DDR3_ECC_EN" value="false" />
+ <parameter name="CTRL_DDR3_MMR_EN" value="false" />
+ <parameter name="CTRL_DDR3_RD_TO_RD_DIFF_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_DDR3_RD_TO_WR_DIFF_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_DDR3_RD_TO_WR_SAME_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_DDR3_REORDER_EN" value="true" />
+ <parameter name="CTRL_DDR3_SELF_REFRESH_EN" value="false" />
+ <parameter name="CTRL_DDR3_STARVE_LIMIT" value="10" />
+ <parameter name="CTRL_DDR3_USER_PRIORITY_EN" value="false" />
+ <parameter name="CTRL_DDR3_USER_REFRESH_EN" value="false" />
+ <parameter name="CTRL_DDR3_WR_TO_RD_DIFF_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_DDR3_WR_TO_RD_SAME_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_DDR3_WR_TO_WR_DIFF_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_DDR4_ADDR_ORDER_ENUM">DDR4_CTRL_ADDR_ORDER_CS_R_B_C_BG</parameter>
+ <parameter name="CTRL_DDR4_AUTO_POWER_DOWN_CYCS" value="32" />
+ <parameter name="CTRL_DDR4_AUTO_POWER_DOWN_EN" value="false" />
+ <parameter name="CTRL_DDR4_AUTO_PRECHARGE_EN" value="false" />
+ <parameter name="CTRL_DDR4_AVL_PROTOCOL_ENUM">CTRL_AVL_PROTOCOL_MM</parameter>
+ <parameter name="CTRL_DDR4_ECC_AUTO_CORRECTION_EN" value="false" />
+ <parameter name="CTRL_DDR4_ECC_EN" value="false" />
+ <parameter name="CTRL_DDR4_MMR_EN" value="false" />
+ <parameter name="CTRL_DDR4_RD_TO_RD_DIFF_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_DDR4_RD_TO_WR_DIFF_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_DDR4_RD_TO_WR_SAME_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_DDR4_REORDER_EN" value="true" />
+ <parameter name="CTRL_DDR4_SELF_REFRESH_EN" value="false" />
+ <parameter name="CTRL_DDR4_STARVE_LIMIT" value="10" />
+ <parameter name="CTRL_DDR4_USER_PRIORITY_EN" value="false" />
+ <parameter name="CTRL_DDR4_USER_REFRESH_EN" value="false" />
+ <parameter name="CTRL_DDR4_WR_TO_RD_DIFF_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_DDR4_WR_TO_RD_SAME_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_DDR4_WR_TO_WR_DIFF_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_QDR2_AVL_ENABLE_POWER_OF_TWO_BUS" value="false" />
+ <parameter name="CTRL_QDR2_AVL_MAX_BURST_COUNT" value="4" />
+ <parameter name="CTRL_QDR2_AVL_PROTOCOL_ENUM">CTRL_AVL_PROTOCOL_MM</parameter>
+ <parameter name="CTRL_QDR4_AVL_ENABLE_POWER_OF_TWO_BUS" value="false" />
+ <parameter name="CTRL_QDR4_AVL_MAX_BURST_COUNT" value="4" />
+ <parameter name="CTRL_QDR4_AVL_PROTOCOL_ENUM">CTRL_AVL_PROTOCOL_MM</parameter>
+ <parameter name="CTRL_QDR4_RAW_TURNAROUND_DELAY_CYC" value="3" />
+ <parameter name="CTRL_QDR4_WAR_TURNAROUND_DELAY_CYC" value="10" />
+ <parameter name="CTRL_RLD2_AVL_PROTOCOL_ENUM">CTRL_AVL_PROTOCOL_MM</parameter>
+ <parameter name="CTRL_RLD3_ADDR_ORDER_ENUM">RLD3_CTRL_ADDR_ORDER_CS_R_B_C</parameter>
+ <parameter name="CTRL_RLD3_AVL_PROTOCOL_ENUM">CTRL_AVL_PROTOCOL_MM</parameter>
+ <parameter name="DIAG_BOARD_DELAY_CONFIG_STR" value="" />
+ <parameter name="DIAG_DDR3_CA_LEVEL_EN" value="false" />
+ <parameter name="DIAG_DDR3_EFFICIENCY_MONITOR">EFFMON_MODE_DISABLED</parameter>
+ <parameter name="DIAG_DDR3_EXPORT_SEQ_AVALON_MASTER" value="false" />
+ <parameter name="DIAG_DDR3_EXPORT_SEQ_AVALON_SLAVE">CAL_DEBUG_EXPORT_MODE_DISABLED</parameter>
+ <parameter name="DIAG_DDR3_EX_DESIGN_NUM_OF_SLAVES" value="1" />
+ <parameter name="DIAG_DDR3_INTERFACE_ID" value="0" />
+ <parameter name="DIAG_DDR3_SIM_CAL_MODE_ENUM" value="SIM_CAL_MODE_SKIP" />
+ <parameter name="DIAG_DDR3_TG_BE_PATTERN_LENGTH" value="8" />
+ <parameter name="DIAG_DDR3_TG_DATA_PATTERN_LENGTH" value="8" />
+ <parameter name="DIAG_DDR3_USE_TG_AVL_2" value="false" />
+ <parameter name="DIAG_DDR4_EFFICIENCY_MONITOR">EFFMON_MODE_DISABLED</parameter>
+ <parameter name="DIAG_DDR4_EXPORT_SEQ_AVALON_MASTER" value="false" />
+ <parameter name="DIAG_DDR4_EXPORT_SEQ_AVALON_SLAVE">CAL_DEBUG_EXPORT_MODE_DISABLED</parameter>
+ <parameter name="DIAG_DDR4_EX_DESIGN_NUM_OF_SLAVES" value="1" />
+ <parameter name="DIAG_DDR4_INTERFACE_ID" value="0" />
+ <parameter name="DIAG_DDR4_SIM_CAL_MODE_ENUM" value="SIM_CAL_MODE_SKIP" />
+ <parameter name="DIAG_DDR4_SKIP_CA_DESKEW" value="false" />
+ <parameter name="DIAG_DDR4_SKIP_CA_LEVEL" value="false" />
+ <parameter name="DIAG_DDR4_SKIP_VREF_CAL" value="true" />
+ <parameter name="DIAG_DDR4_TG_BE_PATTERN_LENGTH" value="8" />
+ <parameter name="DIAG_DDR4_TG_DATA_PATTERN_LENGTH" value="8" />
+ <parameter name="DIAG_DDR4_USE_TG_AVL_2" value="false" />
+ <parameter name="DIAG_ECLIPSE_DEBUG" value="false" />
+ <parameter name="DIAG_ENABLE_HPS_EMIF_DEBUG" value="false" />
+ <parameter name="DIAG_ENABLE_JTAG_UART" value="false" />
+ <parameter name="DIAG_ENABLE_JTAG_UART_HEX" value="false" />
+ <parameter name="DIAG_EXPORT_VJI" value="false" />
+ <parameter name="DIAG_EXPOSE_DFT_SIGNALS" value="false" />
+ <parameter name="DIAG_EXTRA_CONFIGS" value="" />
+ <parameter name="DIAG_EX_DESIGN_ADD_TEST_EMIFS" value="" />
+ <parameter name="DIAG_FAST_SIM_OVERRIDE">FAST_SIM_OVERRIDE_DEFAULT</parameter>
+ <parameter name="DIAG_QDR2_EFFICIENCY_MONITOR">EFFMON_MODE_DISABLED</parameter>
+ <parameter name="DIAG_QDR2_EXPORT_SEQ_AVALON_MASTER" value="false" />
+ <parameter name="DIAG_QDR2_EXPORT_SEQ_AVALON_SLAVE">CAL_DEBUG_EXPORT_MODE_DISABLED</parameter>
+ <parameter name="DIAG_QDR2_EX_DESIGN_NUM_OF_SLAVES" value="1" />
+ <parameter name="DIAG_QDR2_INTERFACE_ID" value="0" />
+ <parameter name="DIAG_QDR2_SIM_CAL_MODE_ENUM" value="SIM_CAL_MODE_SKIP" />
+ <parameter name="DIAG_QDR2_TG_BE_PATTERN_LENGTH" value="8" />
+ <parameter name="DIAG_QDR2_TG_DATA_PATTERN_LENGTH" value="8" />
+ <parameter name="DIAG_QDR2_USE_TG_AVL_2" value="false" />
+ <parameter name="DIAG_QDR4_EFFICIENCY_MONITOR">EFFMON_MODE_DISABLED</parameter>
+ <parameter name="DIAG_QDR4_EXPORT_SEQ_AVALON_MASTER" value="false" />
+ <parameter name="DIAG_QDR4_EXPORT_SEQ_AVALON_SLAVE">CAL_DEBUG_EXPORT_MODE_DISABLED</parameter>
+ <parameter name="DIAG_QDR4_EX_DESIGN_NUM_OF_SLAVES" value="1" />
+ <parameter name="DIAG_QDR4_INTERFACE_ID" value="0" />
+ <parameter name="DIAG_QDR4_SIM_CAL_MODE_ENUM" value="SIM_CAL_MODE_SKIP" />
+ <parameter name="DIAG_QDR4_TG_BE_PATTERN_LENGTH" value="8" />
+ <parameter name="DIAG_QDR4_TG_DATA_PATTERN_LENGTH" value="8" />
+ <parameter name="DIAG_QDR4_USE_TG_AVL_2" value="false" />
+ <parameter name="DIAG_RLD2_EFFICIENCY_MONITOR">EFFMON_MODE_DISABLED</parameter>
+ <parameter name="DIAG_RLD2_EXPORT_SEQ_AVALON_MASTER" value="false" />
+ <parameter name="DIAG_RLD2_EXPORT_SEQ_AVALON_SLAVE">CAL_DEBUG_EXPORT_MODE_DISABLED</parameter>
+ <parameter name="DIAG_RLD2_EX_DESIGN_NUM_OF_SLAVES" value="1" />
+ <parameter name="DIAG_RLD2_INTERFACE_ID" value="0" />
+ <parameter name="DIAG_RLD2_SIM_CAL_MODE_ENUM" value="SIM_CAL_MODE_SKIP" />
+ <parameter name="DIAG_RLD2_TG_BE_PATTERN_LENGTH" value="8" />
+ <parameter name="DIAG_RLD2_TG_DATA_PATTERN_LENGTH" value="8" />
+ <parameter name="DIAG_RLD2_USE_TG_AVL_2" value="false" />
+ <parameter name="DIAG_RLD3_EFFICIENCY_MONITOR">EFFMON_MODE_DISABLED</parameter>
+ <parameter name="DIAG_RLD3_EXPORT_SEQ_AVALON_MASTER" value="false" />
+ <parameter name="DIAG_RLD3_EXPORT_SEQ_AVALON_SLAVE">CAL_DEBUG_EXPORT_MODE_DISABLED</parameter>
+ <parameter name="DIAG_RLD3_EX_DESIGN_NUM_OF_SLAVES" value="1" />
+ <parameter name="DIAG_RLD3_INTERFACE_ID" value="0" />
+ <parameter name="DIAG_RLD3_SIM_CAL_MODE_ENUM" value="SIM_CAL_MODE_SKIP" />
+ <parameter name="DIAG_RLD3_TG_BE_PATTERN_LENGTH" value="8" />
+ <parameter name="DIAG_RLD3_TG_DATA_PATTERN_LENGTH" value="8" />
+ <parameter name="DIAG_RLD3_USE_TG_AVL_2" value="false" />
+ <parameter name="DIAG_SIM_REGTEST_MODE" value="false" />
+ <parameter name="DIAG_SYNTH_FOR_SIM" value="false" />
+ <parameter name="DIAG_TIMING_REGTEST_MODE" value="false" />
+ <parameter name="DIAG_USE_BOARD_DELAY_MODEL" value="false" />
+ <parameter name="DIAG_VERBOSE_IOAUX" value="false" />
+ <parameter name="INTERNAL_TESTING_MODE" value="false" />
+ <parameter name="IS_ED_SLAVE" value="false" />
+ <parameter name="MEM_DDR3_ALERT_N_DQS_GROUP" value="0" />
+ <parameter name="MEM_DDR3_ALERT_N_PLACEMENT_ENUM">DDR3_ALERT_N_PLACEMENT_AC_LANES</parameter>
+ <parameter name="MEM_DDR3_ASR_ENUM" value="DDR3_ASR_MANUAL" />
+ <parameter name="MEM_DDR3_ATCL_ENUM" value="DDR3_ATCL_DISABLED" />
+ <parameter name="MEM_DDR3_BANK_ADDR_WIDTH" value="3" />
+ <parameter name="MEM_DDR3_BL_ENUM" value="DDR3_BL_BL8" />
+ <parameter name="MEM_DDR3_BT_ENUM" value="DDR3_BT_SEQUENTIAL" />
+ <parameter name="MEM_DDR3_CKE_PER_DIMM" value="1" />
+ <parameter name="MEM_DDR3_CK_WIDTH" value="1" />
+ <parameter name="MEM_DDR3_COL_ADDR_WIDTH" value="10" />
+ <parameter name="MEM_DDR3_DISCRETE_CS_WIDTH" value="1" />
+ <parameter name="MEM_DDR3_DLL_EN" value="true" />
+ <parameter name="MEM_DDR3_DM_EN" value="true" />
+ <parameter name="MEM_DDR3_DQ_PER_DQS" value="8" />
+ <parameter name="MEM_DDR3_DQ_WIDTH" value="72" />
+ <parameter name="MEM_DDR3_DRV_STR_ENUM" value="DDR3_DRV_STR_RZQ_7" />
+ <parameter name="MEM_DDR3_FORMAT_ENUM" value="MEM_FORMAT_UDIMM" />
+ <parameter name="MEM_DDR3_LRDIMM_EXTENDED_CONFIG" value="000000000000000000" />
+ <parameter name="MEM_DDR3_MIRROR_ADDRESSING_EN" value="true" />
+ <parameter name="MEM_DDR3_NUM_OF_DIMMS" value="1" />
+ <parameter name="MEM_DDR3_PD_ENUM" value="DDR3_PD_OFF" />
+ <parameter name="MEM_DDR3_RANKS_PER_DIMM" value="1" />
+ <parameter name="MEM_DDR3_RDIMM_CONFIG" value="0000000000000000" />
+ <parameter name="MEM_DDR3_ROW_ADDR_WIDTH" value="15" />
+ <parameter name="MEM_DDR3_RTT_NOM_ENUM">DDR3_RTT_NOM_ODT_DISABLED</parameter>
+ <parameter name="MEM_DDR3_RTT_WR_ENUM" value="DDR3_RTT_WR_RZQ_4" />
+ <parameter name="MEM_DDR3_R_ODT0_1X1" value="off" />
+ <parameter name="MEM_DDR3_R_ODT0_2X2" value="off,off" />
+ <parameter name="MEM_DDR3_R_ODT0_4X2" value="off,off,on,on" />
+ <parameter name="MEM_DDR3_R_ODT0_4X4" value="off,off,off,off" />
+ <parameter name="MEM_DDR3_R_ODT1_2X2" value="off,off" />
+ <parameter name="MEM_DDR3_R_ODT1_4X2" value="on,on,off,off" />
+ <parameter name="MEM_DDR3_R_ODT1_4X4" value="off,off,on,on" />
+ <parameter name="MEM_DDR3_R_ODT2_4X4" value="off,off,off,off" />
+ <parameter name="MEM_DDR3_R_ODT3_4X4" value="on,on,off,off" />
+ <parameter name="MEM_DDR3_R_ODTN_1X1" value="Rank 0" />
+ <parameter name="MEM_DDR3_R_ODTN_2X2" value="Rank 0,Rank 1" />
+ <parameter name="MEM_DDR3_R_ODTN_4X2">Rank 0,Rank 1,Rank 2,Rank 3</parameter>
+ <parameter name="MEM_DDR3_R_ODTN_4X4">Rank 0,Rank 1,Rank 2,Rank 3</parameter>
+ <parameter name="MEM_DDR3_SPEEDBIN_ENUM" value="DDR3_SPEEDBIN_2133" />
+ <parameter name="MEM_DDR3_SRT_ENUM" value="DDR3_SRT_NORMAL" />
+ <parameter name="MEM_DDR3_TCL" value="14" />
+ <parameter name="MEM_DDR3_TDH_DC_MV" value="100" />
+ <parameter name="MEM_DDR3_TDH_PS" value="55" />
+ <parameter name="MEM_DDR3_TDQSCK_PS" value="180" />
+ <parameter name="MEM_DDR3_TDQSQ_PS" value="75" />
+ <parameter name="MEM_DDR3_TDQSS_CYC" value="0.27" />
+ <parameter name="MEM_DDR3_TDSH_CYC" value="0.18" />
+ <parameter name="MEM_DDR3_TDSS_CYC" value="0.18" />
+ <parameter name="MEM_DDR3_TDS_AC_MV" value="135" />
+ <parameter name="MEM_DDR3_TDS_PS" value="53" />
+ <parameter name="MEM_DDR3_TFAW_NS" value="25.0" />
+ <parameter name="MEM_DDR3_TIH_DC_MV" value="100" />
+ <parameter name="MEM_DDR3_TIH_PS" value="95" />
+ <parameter name="MEM_DDR3_TINIT_US" value="500" />
+ <parameter name="MEM_DDR3_TIS_AC_MV" value="135" />
+ <parameter name="MEM_DDR3_TIS_PS" value="60" />
+ <parameter name="MEM_DDR3_TMRD_CK_CYC" value="4" />
+ <parameter name="MEM_DDR3_TQH_CYC" value="0.38" />
+ <parameter name="MEM_DDR3_TQSH_CYC" value="0.4" />
+ <parameter name="MEM_DDR3_TRAS_NS" value="33.0" />
+ <parameter name="MEM_DDR3_TRCD_NS" value="13.09" />
+ <parameter name="MEM_DDR3_TREFI_US" value="7.8" />
+ <parameter name="MEM_DDR3_TRFC_NS" value="160.0" />
+ <parameter name="MEM_DDR3_TRP_NS" value="13.09" />
+ <parameter name="MEM_DDR3_TRRD_CYC" value="6" />
+ <parameter name="MEM_DDR3_TRTP_CYC" value="8" />
+ <parameter name="MEM_DDR3_TWLH_PS" value="125.0" />
+ <parameter name="MEM_DDR3_TWLS_PS" value="125.0" />
+ <parameter name="MEM_DDR3_TWR_NS" value="15.0" />
+ <parameter name="MEM_DDR3_TWTR_CYC" value="8" />
+ <parameter name="MEM_DDR3_USE_DEFAULT_ODT" value="true" />
+ <parameter name="MEM_DDR3_WTCL" value="10" />
+ <parameter name="MEM_DDR3_W_ODT0_1X1" value="on" />
+ <parameter name="MEM_DDR3_W_ODT0_2X2" value="on,off" />
+ <parameter name="MEM_DDR3_W_ODT0_4X2" value="off,off,on,on" />
+ <parameter name="MEM_DDR3_W_ODT0_4X4" value="on,on,off,off" />
+ <parameter name="MEM_DDR3_W_ODT1_2X2" value="off,on" />
+ <parameter name="MEM_DDR3_W_ODT1_4X2" value="on,on,off,off" />
+ <parameter name="MEM_DDR3_W_ODT1_4X4" value="off,off,on,on" />
+ <parameter name="MEM_DDR3_W_ODT2_4X4" value="off,off,on,on" />
+ <parameter name="MEM_DDR3_W_ODT3_4X4" value="on,on,off,off" />
+ <parameter name="MEM_DDR3_W_ODTN_1X1" value="Rank 0" />
+ <parameter name="MEM_DDR3_W_ODTN_2X2" value="Rank 0,Rank 1" />
+ <parameter name="MEM_DDR3_W_ODTN_4X2">Rank 0,Rank 1,Rank 2,Rank 3</parameter>
+ <parameter name="MEM_DDR3_W_ODTN_4X4">Rank 0,Rank 1,Rank 2,Rank 3</parameter>
+ <parameter name="MEM_DDR4_AC_PARITY_LATENCY">DDR4_AC_PARITY_LATENCY_DISABLE</parameter>
+ <parameter name="MEM_DDR4_AC_PERSISTENT_ERROR" value="false" />
+ <parameter name="MEM_DDR4_ALERT_N_AC_LANE" value="0" />
+ <parameter name="MEM_DDR4_ALERT_N_AC_PIN" value="0" />
+ <parameter name="MEM_DDR4_ALERT_N_DQS_GROUP" value="0" />
+ <parameter name="MEM_DDR4_ALERT_N_PLACEMENT_ENUM">DDR4_ALERT_N_PLACEMENT_DATA_LANES</parameter>
+ <parameter name="MEM_DDR4_ALERT_PAR_EN" value="true" />
+ <parameter name="MEM_DDR4_ASR_ENUM">DDR4_ASR_MANUAL_NORMAL</parameter>
+ <parameter name="MEM_DDR4_ATCL_ENUM" value="DDR4_ATCL_DISABLED" />
+ <parameter name="MEM_DDR4_BANK_ADDR_WIDTH" value="2" />
+ <parameter name="MEM_DDR4_BANK_GROUP_WIDTH" value="2" />
+ <parameter name="MEM_DDR4_BL_ENUM" value="DDR4_BL_BL8" />
+ <parameter name="MEM_DDR4_BT_ENUM" value="DDR4_BT_SEQUENTIAL" />
+ <parameter name="MEM_DDR4_CAL_MODE" value="0" />
+ <parameter name="MEM_DDR4_CHIP_ID_WIDTH" value="0" />
+ <parameter name="MEM_DDR4_CKE_PER_DIMM" value="1" />
+ <parameter name="MEM_DDR4_CK_WIDTH" value="1" />
+ <parameter name="MEM_DDR4_COL_ADDR_WIDTH" value="10" />
+ <parameter name="MEM_DDR4_DEFAULT_VREFOUT" value="false" />
+ <parameter name="MEM_DDR4_DISCRETE_CS_WIDTH" value="1" />
+ <parameter name="MEM_DDR4_DLL_EN" value="true" />
+ <parameter name="MEM_DDR4_DM_EN" value="true" />
+ <parameter name="MEM_DDR4_DQ_PER_DQS" value="8" />
+ <parameter name="MEM_DDR4_DQ_WIDTH" value="72" />
+ <parameter name="MEM_DDR4_DRV_STR_ENUM" value="DDR4_DRV_STR_RZQ_7" />
+ <parameter name="MEM_DDR4_FINE_GRANULARITY_REFRESH">DDR4_FINE_REFRESH_FIXED_1X</parameter>
+ <parameter name="MEM_DDR4_FORMAT_ENUM" value="MEM_FORMAT_SODIMM" />
+ <parameter name="MEM_DDR4_GEARDOWN" value="DDR4_GEARDOWN_HR" />
+ <parameter name="MEM_DDR4_INTERNAL_VREFDQ_MONITOR" value="true" />
+ <parameter name="MEM_DDR4_LRDIMM_EXTENDED_CONFIG" value="0000000000000000" />
+ <parameter name="MEM_DDR4_MAX_POWERDOWN" value="false" />
+ <parameter name="MEM_DDR4_MIRROR_ADDRESSING_EN" value="true" />
+ <parameter name="MEM_DDR4_MPR_READ_FORMAT">DDR4_MPR_READ_FORMAT_SERIAL</parameter>
+ <parameter name="MEM_DDR4_NUM_OF_DIMMS" value="1" />
+ <parameter name="MEM_DDR4_ODT_IN_POWERDOWN" value="true" />
+ <parameter name="MEM_DDR4_PER_DRAM_ADDR" value="false" />
+ <parameter name="MEM_DDR4_RANKS_PER_DIMM" value="1" />
+ <parameter name="MEM_DDR4_RDIMM_CONFIG">00000000000000000000000000000000000000</parameter>
+ <parameter name="MEM_DDR4_READ_DBI" value="false" />
+ <parameter name="MEM_DDR4_READ_PREAMBLE" value="2" />
+ <parameter name="MEM_DDR4_READ_PREAMBLE_TRAINING" value="false" />
+ <parameter name="MEM_DDR4_ROW_ADDR_WIDTH" value="15" />
+ <parameter name="MEM_DDR4_RTT_NOM_ENUM" value="DDR4_RTT_NOM_RZQ_4" />
+ <parameter name="MEM_DDR4_RTT_PARK">DDR4_RTT_PARK_ODT_DISABLED</parameter>
+ <parameter name="MEM_DDR4_RTT_WR_ENUM">DDR4_RTT_WR_ODT_DISABLED</parameter>
+ <parameter name="MEM_DDR4_R_ODT0_1X1" value="on" />
+ <parameter name="MEM_DDR4_R_ODT0_2X2" value="off,off" />
+ <parameter name="MEM_DDR4_R_ODT0_4X2" value="off,off,on,on" />
+ <parameter name="MEM_DDR4_R_ODT0_4X4" value="off,off,off,off" />
+ <parameter name="MEM_DDR4_R_ODT1_2X2" value="off,off" />
+ <parameter name="MEM_DDR4_R_ODT1_4X2" value="on,on,off,off" />
+ <parameter name="MEM_DDR4_R_ODT1_4X4" value="off,off,on,on" />
+ <parameter name="MEM_DDR4_R_ODT2_4X4" value="off,off,off,off" />
+ <parameter name="MEM_DDR4_R_ODT3_4X4" value="on,on,off,off" />
+ <parameter name="MEM_DDR4_R_ODTN_1X1" value="Rank 0" />
+ <parameter name="MEM_DDR4_R_ODTN_2X2" value="Rank 0,Rank 1" />
+ <parameter name="MEM_DDR4_R_ODTN_4X2">Rank 0,Rank 1,Rank 2,Rank 3</parameter>
+ <parameter name="MEM_DDR4_R_ODTN_4X4">Rank 0,Rank 1,Rank 2,Rank 3</parameter>
+ <parameter name="MEM_DDR4_SELF_RFSH_ABORT" value="false" />
+ <parameter name="MEM_DDR4_SPEEDBIN_ENUM" value="DDR4_SPEEDBIN_2133" />
+ <parameter name="MEM_DDR4_TCCD_L_CYC" value="6" />
+ <parameter name="MEM_DDR4_TCCD_S_CYC" value="4" />
+ <parameter name="MEM_DDR4_TCL" value="15" />
+ <parameter name="MEM_DDR4_TDIVW_DJ_CYC" value="0.1" />
+ <parameter name="MEM_DDR4_TDQSCK_PS" value="170" />
+ <parameter name="MEM_DDR4_TDQSQ_PS" value="80" />
+ <parameter name="MEM_DDR4_TDQSS_CYC" value="0.27" />
+ <parameter name="MEM_DDR4_TDSH_CYC" value="0.18" />
+ <parameter name="MEM_DDR4_TDSS_CYC" value="0.18" />
+ <parameter name="MEM_DDR4_TEMP_CONTROLLED_RFSH_ENA" value="false" />
+ <parameter name="MEM_DDR4_TEMP_CONTROLLED_RFSH_RANGE">DDR4_TEMP_CONTROLLED_RFSH_NORMAL</parameter>
+ <parameter name="MEM_DDR4_TEMP_SENSOR_READOUT" value="false" />
+ <parameter name="MEM_DDR4_TFAW_NS" value="21.0" />
+ <parameter name="MEM_DDR4_TIH_DC_MV" value="75" />
+ <parameter name="MEM_DDR4_TIH_PS" value="105" />
+ <parameter name="MEM_DDR4_TINIT_US" value="500" />
+ <parameter name="MEM_DDR4_TIS_AC_MV" value="100" />
+ <parameter name="MEM_DDR4_TIS_PS" value="80" />
+ <parameter name="MEM_DDR4_TMRD_CK_CYC" value="8" />
+ <parameter name="MEM_DDR4_TQH_CYC" value="0.38" />
+ <parameter name="MEM_DDR4_TQSH_CYC" value="0.38" />
+ <parameter name="MEM_DDR4_TRAS_NS" value="33.0" />
+ <parameter name="MEM_DDR4_TRCD_NS" value="14.06" />
+ <parameter name="MEM_DDR4_TREFI_US" value="7.8" />
+ <parameter name="MEM_DDR4_TRFC_NS" value="260.0" />
+ <parameter name="MEM_DDR4_TRP_NS" value="14.06" />
+ <parameter name="MEM_DDR4_TRRD_L_CYC" value="6" />
+ <parameter name="MEM_DDR4_TRRD_S_CYC" value="4" />
+ <parameter name="MEM_DDR4_TWLH_PS" value="130.0" />
+ <parameter name="MEM_DDR4_TWLS_PS" value="130.0" />
+ <parameter name="MEM_DDR4_TWR_NS" value="15.0" />
+ <parameter name="MEM_DDR4_TWTR_L_CYC" value="8" />
+ <parameter name="MEM_DDR4_TWTR_S_CYC" value="3" />
+ <parameter name="MEM_DDR4_USER_VREFDQ_TRAINING_RANGE">DDR4_VREFDQ_TRAINING_RANGE_1</parameter>
+ <parameter name="MEM_DDR4_USER_VREFDQ_TRAINING_VALUE" value="68.0" />
+ <parameter name="MEM_DDR4_USE_DEFAULT_ODT" value="false" />
+ <parameter name="MEM_DDR4_VDIVW_TOTAL" value="136" />
+ <parameter name="MEM_DDR4_WRITE_CRC" value="false" />
+ <parameter name="MEM_DDR4_WRITE_DBI" value="false" />
+ <parameter name="MEM_DDR4_WRITE_PREAMBLE" value="1" />
+ <parameter name="MEM_DDR4_WTCL" value="11" />
+ <parameter name="MEM_DDR4_W_ODT0_1X1" value="on" />
+ <parameter name="MEM_DDR4_W_ODT0_2X2" value="on,off" />
+ <parameter name="MEM_DDR4_W_ODT0_4X2" value="off,off,on,on" />
+ <parameter name="MEM_DDR4_W_ODT0_4X4" value="on,on,off,off" />
+ <parameter name="MEM_DDR4_W_ODT1_2X2" value="off,on" />
+ <parameter name="MEM_DDR4_W_ODT1_4X2" value="on,on,off,off" />
+ <parameter name="MEM_DDR4_W_ODT1_4X4" value="off,off,on,on" />
+ <parameter name="MEM_DDR4_W_ODT2_4X4" value="off,off,on,on" />
+ <parameter name="MEM_DDR4_W_ODT3_4X4" value="on,on,off,off" />
+ <parameter name="MEM_DDR4_W_ODTN_1X1" value="Rank 0" />
+ <parameter name="MEM_DDR4_W_ODTN_2X2" value="Rank 0,Rank 1" />
+ <parameter name="MEM_DDR4_W_ODTN_4X2">Rank 0,Rank 1,Rank 2,Rank 3</parameter>
+ <parameter name="MEM_DDR4_W_ODTN_4X4">Rank 0,Rank 1,Rank 2,Rank 3</parameter>
+ <parameter name="MEM_QDR2_ADDR_WIDTH" value="19" />
+ <parameter name="MEM_QDR2_BL" value="4" />
+ <parameter name="MEM_QDR2_BWS_EN" value="true" />
+ <parameter name="MEM_QDR2_DATA_PER_DEVICE" value="36" />
+ <parameter name="MEM_QDR2_INTERNAL_JITTER_NS" value="0.08" />
+ <parameter name="MEM_QDR2_SPEEDBIN_ENUM" value="QDR2_SPEEDBIN_633" />
+ <parameter name="MEM_QDR2_TCCQO_NS" value="0.45" />
+ <parameter name="MEM_QDR2_TCQDOH_NS" value="-0.09" />
+ <parameter name="MEM_QDR2_TCQD_NS" value="0.09" />
+ <parameter name="MEM_QDR2_TCQH_NS" value="0.71" />
+ <parameter name="MEM_QDR2_THA_NS" value="0.18" />
+ <parameter name="MEM_QDR2_THD_NS" value="0.18" />
+ <parameter name="MEM_QDR2_TRL_CYC" value="2.5" />
+ <parameter name="MEM_QDR2_TSA_NS" value="0.23" />
+ <parameter name="MEM_QDR2_TSD_NS" value="0.23" />
+ <parameter name="MEM_QDR2_WIDTH_EXPANDED" value="false" />
+ <parameter name="MEM_QDR4_AC_ODT_MODE_ENUM" value="QDR4_ODT_25_PCT" />
+ <parameter name="MEM_QDR4_ADDR_INV_ENA" value="false" />
+ <parameter name="MEM_QDR4_ADDR_WIDTH" value="21" />
+ <parameter name="MEM_QDR4_CK_ODT_MODE_ENUM" value="QDR4_ODT_25_PCT" />
+ <parameter name="MEM_QDR4_DATA_INV_ENA" value="false" />
+ <parameter name="MEM_QDR4_DATA_ODT_MODE_ENUM" value="QDR4_ODT_25_PCT" />
+ <parameter name="MEM_QDR4_DQ_PER_PORT_PER_DEVICE" value="36" />
+ <parameter name="MEM_QDR4_PD_OUTPUT_DRIVE_MODE_ENUM">QDR4_OUTPUT_DRIVE_25_PCT</parameter>
+ <parameter name="MEM_QDR4_PU_OUTPUT_DRIVE_MODE_ENUM">QDR4_OUTPUT_DRIVE_25_PCT</parameter>
+ <parameter name="MEM_QDR4_SPEEDBIN_ENUM" value="QDR4_SPEEDBIN_2133" />
+ <parameter name="MEM_QDR4_TAH_PS" value="125" />
+ <parameter name="MEM_QDR4_TAS_PS" value="125" />
+ <parameter name="MEM_QDR4_TCH_PS" value="150" />
+ <parameter name="MEM_QDR4_TCKDK_MAX_PS" value="150" />
+ <parameter name="MEM_QDR4_TCKDK_MIN_PS" value="-150" />
+ <parameter name="MEM_QDR4_TCKQK_MAX_PS" value="225" />
+ <parameter name="MEM_QDR4_TCS_PS" value="150" />
+ <parameter name="MEM_QDR4_TIH_PS" value="125" />
+ <parameter name="MEM_QDR4_TIS_PS" value="125" />
+ <parameter name="MEM_QDR4_TQH_CYC" value="0.4" />
+ <parameter name="MEM_QDR4_TQKQ_MAX_PS" value="75" />
+ <parameter name="MEM_QDR4_WIDTH_EXPANDED" value="false" />
+ <parameter name="MEM_RLD2_ADDR_WIDTH" value="21" />
+ <parameter name="MEM_RLD2_BANK_ADDR_WIDTH" value="3" />
+ <parameter name="MEM_RLD2_BL" value="4" />
+ <parameter name="MEM_RLD2_CONFIG_ENUM">RLD2_CONFIG_TRC_8_TRL_8_TWL_9</parameter>
+ <parameter name="MEM_RLD2_DM_EN" value="true" />
+ <parameter name="MEM_RLD2_DQ_PER_DEVICE" value="9" />
+ <parameter name="MEM_RLD2_DRIVE_IMPEDENCE_ENUM">RLD2_DRIVE_IMPEDENCE_INTERNAL_50</parameter>
+ <parameter name="MEM_RLD2_ODT_MODE_ENUM" value="RLD2_ODT_ON" />
+ <parameter name="MEM_RLD2_REFRESH_INTERVAL_US" value="0.24" />
+ <parameter name="MEM_RLD2_SPEEDBIN_ENUM" value="RLD2_SPEEDBIN_18" />
+ <parameter name="MEM_RLD2_TAH_NS" value="0.3" />
+ <parameter name="MEM_RLD2_TAS_NS" value="0.3" />
+ <parameter name="MEM_RLD2_TCKDK_MAX_NS" value="0.3" />
+ <parameter name="MEM_RLD2_TCKDK_MIN_NS" value="-0.3" />
+ <parameter name="MEM_RLD2_TCKH_CYC" value="0.45" />
+ <parameter name="MEM_RLD2_TCKQK_MAX_NS" value="0.2" />
+ <parameter name="MEM_RLD2_TDH_NS" value="0.17" />
+ <parameter name="MEM_RLD2_TDS_NS" value="0.17" />
+ <parameter name="MEM_RLD2_TQKH_HCYC" value="0.9" />
+ <parameter name="MEM_RLD2_TQKQ_MAX_NS" value="0.12" />
+ <parameter name="MEM_RLD2_TQKQ_MIN_NS" value="-0.12" />
+ <parameter name="MEM_RLD2_WIDTH_EXPANDED" value="false" />
+ <parameter name="MEM_RLD3_ADDR_WIDTH" value="20" />
+ <parameter name="MEM_RLD3_AREF_PROTOCOL_ENUM" value="RLD3_AREF_BAC" />
+ <parameter name="MEM_RLD3_BANK_ADDR_WIDTH" value="4" />
+ <parameter name="MEM_RLD3_BL" value="2" />
+ <parameter name="MEM_RLD3_DATA_LATENCY_MODE_ENUM" value="RLD3_DL_RL16_WL17" />
+ <parameter name="MEM_RLD3_DEPTH_EXPANDED" value="false" />
+ <parameter name="MEM_RLD3_DM_EN" value="true" />
+ <parameter name="MEM_RLD3_DQ_PER_DEVICE" value="36" />
+ <parameter name="MEM_RLD3_ODT_MODE_ENUM" value="RLD3_ODT_40" />
+ <parameter name="MEM_RLD3_OUTPUT_DRIVE_MODE_ENUM">RLD3_OUTPUT_DRIVE_40</parameter>
+ <parameter name="MEM_RLD3_SPEEDBIN_ENUM" value="RLD3_SPEEDBIN_093E" />
+ <parameter name="MEM_RLD3_TCKDK_MAX_CYC" value="0.27" />
+ <parameter name="MEM_RLD3_TCKDK_MIN_CYC" value="-0.27" />
+ <parameter name="MEM_RLD3_TCKQK_MAX_PS" value="135" />
+ <parameter name="MEM_RLD3_TDH_PS" value="5" />
+ <parameter name="MEM_RLD3_TDS_PS" value="-30" />
+ <parameter name="MEM_RLD3_TIH_PS" value="65" />
+ <parameter name="MEM_RLD3_TIS_PS" value="85" />
+ <parameter name="MEM_RLD3_TQH_CYC" value="0.38" />
+ <parameter name="MEM_RLD3_TQKQ_MAX_PS" value="75" />
+ <parameter name="MEM_RLD3_T_RC_MODE_ENUM" value="RLD3_TRC_9" />
+ <parameter name="MEM_RLD3_WIDTH_EXPANDED" value="false" />
+ <parameter name="MEM_RLD3_WRITE_PROTOCOL_ENUM" value="RLD3_WRITE_1BANK" />
+ <parameter name="PHY_DDR3_CAL_ADDR0" value="0" />
+ <parameter name="PHY_DDR3_CAL_ADDR1" value="8" />
+ <parameter name="PHY_DDR3_CAL_ENABLE_NON_DES" value="true" />
+ <parameter name="PHY_DDR3_CONFIG_ENUM">CONFIG_PHY_AND_HARD_CTRL</parameter>
+ <parameter name="PHY_DDR3_CORE_CLKS_SHARING_ENUM">CORE_CLKS_SHARING_DISABLED</parameter>
+ <parameter name="PHY_DDR3_DEFAULT_IO" value="true" />
+ <parameter name="PHY_DDR3_DEFAULT_REF_CLK_FREQ" value="true" />
+ <parameter name="PHY_DDR3_IO_VOLTAGE" value="1.5" />
+ <parameter name="PHY_DDR3_MEM_CLK_FREQ_MHZ" value="1066.667" />
+ <parameter name="PHY_DDR3_RATE_ENUM" value="RATE_QUARTER" />
+ <parameter name="PHY_DDR3_REF_CLK_JITTER_PS" value="10.0" />
+ <parameter name="PHY_DDR3_USER_AC_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_DDR3_USER_AC_MODE_ENUM" value="unset" />
+ <parameter name="PHY_DDR3_USER_AC_SLEW_RATE_ENUM" value="SLEW_RATE_FAST" />
+ <parameter name="PHY_DDR3_USER_CK_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_DDR3_USER_CK_MODE_ENUM" value="unset" />
+ <parameter name="PHY_DDR3_USER_CK_SLEW_RATE_ENUM" value="SLEW_RATE_FAST" />
+ <parameter name="PHY_DDR3_USER_DATA_IN_MODE_ENUM" value="unset" />
+ <parameter name="PHY_DDR3_USER_DATA_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_DDR3_USER_DATA_OUT_MODE_ENUM" value="unset" />
+ <parameter name="PHY_DDR3_USER_PING_PONG_EN" value="false" />
+ <parameter name="PHY_DDR3_USER_PLL_REF_CLK_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_DDR3_USER_REF_CLK_FREQ_MHZ" value="-1.0" />
+ <parameter name="PHY_DDR3_USER_RZQ_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_DDR4_CONFIG_ENUM">CONFIG_PHY_AND_HARD_CTRL</parameter>
+ <parameter name="PHY_DDR4_CORE_CLKS_SHARING_ENUM">CORE_CLKS_SHARING_DISABLED</parameter>
+ <parameter name="PHY_DDR4_DEFAULT_IO" value="false" />
+ <parameter name="PHY_DDR4_DEFAULT_REF_CLK_FREQ" value="false" />
+ <parameter name="PHY_DDR4_IO_VOLTAGE" value="1.2" />
+ <parameter name="PHY_DDR4_MEM_CLK_FREQ_MHZ" value="1000.0" />
+ <parameter name="PHY_DDR4_RATE_ENUM" value="RATE_QUARTER" />
+ <parameter name="PHY_DDR4_REF_CLK_JITTER_PS" value="10.0" />
+ <parameter name="PHY_DDR4_STARTING_VREFIN" value="68.0" />
+ <parameter name="PHY_DDR4_USER_AC_IO_STD_ENUM" value="IO_STD_SSTL_12" />
+ <parameter name="PHY_DDR4_USER_AC_MODE_ENUM" value="OUT_OCT_40_CAL" />
+ <parameter name="PHY_DDR4_USER_AC_SLEW_RATE_ENUM" value="SLEW_RATE_FAST" />
+ <parameter name="PHY_DDR4_USER_CK_IO_STD_ENUM" value="IO_STD_SSTL_12" />
+ <parameter name="PHY_DDR4_USER_CK_MODE_ENUM" value="OUT_OCT_40_CAL" />
+ <parameter name="PHY_DDR4_USER_CK_SLEW_RATE_ENUM" value="SLEW_RATE_FAST" />
+ <parameter name="PHY_DDR4_USER_DATA_IN_MODE_ENUM" value="IN_OCT_120_CAL" />
+ <parameter name="PHY_DDR4_USER_DATA_IO_STD_ENUM" value="IO_STD_POD_12" />
+ <parameter name="PHY_DDR4_USER_DATA_OUT_MODE_ENUM" value="OUT_OCT_34_CAL" />
+ <parameter name="PHY_DDR4_USER_PING_PONG_EN" value="false" />
+ <parameter name="PHY_DDR4_USER_PLL_REF_CLK_IO_STD_ENUM" value="IO_STD_CMOS_12" />
+ <parameter name="PHY_DDR4_USER_REF_CLK_FREQ_MHZ" value="25.0" />
+ <parameter name="PHY_DDR4_USER_RZQ_IO_STD_ENUM" value="IO_STD_CMOS_12" />
+ <parameter name="PHY_QDR2_CONFIG_ENUM">CONFIG_PHY_AND_SOFT_CTRL</parameter>
+ <parameter name="PHY_QDR2_CORE_CLKS_SHARING_ENUM">CORE_CLKS_SHARING_DISABLED</parameter>
+ <parameter name="PHY_QDR2_DEFAULT_IO" value="true" />
+ <parameter name="PHY_QDR2_DEFAULT_REF_CLK_FREQ" value="true" />
+ <parameter name="PHY_QDR2_IO_VOLTAGE" value="1.5" />
+ <parameter name="PHY_QDR2_MEM_CLK_FREQ_MHZ" value="633.333" />
+ <parameter name="PHY_QDR2_RATE_ENUM" value="RATE_HALF" />
+ <parameter name="PHY_QDR2_REF_CLK_JITTER_PS" value="10.0" />
+ <parameter name="PHY_QDR2_USER_AC_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_QDR2_USER_AC_MODE_ENUM" value="unset" />
+ <parameter name="PHY_QDR2_USER_AC_SLEW_RATE_ENUM" value="SLEW_RATE_FAST" />
+ <parameter name="PHY_QDR2_USER_CK_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_QDR2_USER_CK_MODE_ENUM" value="unset" />
+ <parameter name="PHY_QDR2_USER_CK_SLEW_RATE_ENUM" value="SLEW_RATE_FAST" />
+ <parameter name="PHY_QDR2_USER_DATA_IN_MODE_ENUM" value="unset" />
+ <parameter name="PHY_QDR2_USER_DATA_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_QDR2_USER_DATA_OUT_MODE_ENUM" value="unset" />
+ <parameter name="PHY_QDR2_USER_PING_PONG_EN" value="false" />
+ <parameter name="PHY_QDR2_USER_PLL_REF_CLK_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_QDR2_USER_REF_CLK_FREQ_MHZ" value="-1.0" />
+ <parameter name="PHY_QDR2_USER_RZQ_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_QDR4_CONFIG_ENUM">CONFIG_PHY_AND_SOFT_CTRL</parameter>
+ <parameter name="PHY_QDR4_CORE_CLKS_SHARING_ENUM">CORE_CLKS_SHARING_DISABLED</parameter>
+ <parameter name="PHY_QDR4_DEFAULT_IO" value="true" />
+ <parameter name="PHY_QDR4_DEFAULT_REF_CLK_FREQ" value="true" />
+ <parameter name="PHY_QDR4_IO_VOLTAGE" value="1.2" />
+ <parameter name="PHY_QDR4_MEM_CLK_FREQ_MHZ" value="1066.667" />
+ <parameter name="PHY_QDR4_RATE_ENUM" value="RATE_QUARTER" />
+ <parameter name="PHY_QDR4_REF_CLK_JITTER_PS" value="10.0" />
+ <parameter name="PHY_QDR4_STARTING_VREFIN" value="70.0" />
+ <parameter name="PHY_QDR4_USER_AC_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_QDR4_USER_AC_MODE_ENUM" value="unset" />
+ <parameter name="PHY_QDR4_USER_AC_SLEW_RATE_ENUM" value="SLEW_RATE_FAST" />
+ <parameter name="PHY_QDR4_USER_CK_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_QDR4_USER_CK_MODE_ENUM" value="unset" />
+ <parameter name="PHY_QDR4_USER_CK_SLEW_RATE_ENUM" value="SLEW_RATE_FAST" />
+ <parameter name="PHY_QDR4_USER_DATA_IN_MODE_ENUM" value="unset" />
+ <parameter name="PHY_QDR4_USER_DATA_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_QDR4_USER_DATA_OUT_MODE_ENUM" value="unset" />
+ <parameter name="PHY_QDR4_USER_PING_PONG_EN" value="false" />
+ <parameter name="PHY_QDR4_USER_PLL_REF_CLK_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_QDR4_USER_REF_CLK_FREQ_MHZ" value="-1.0" />
+ <parameter name="PHY_QDR4_USER_RZQ_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_RLD2_CONFIG_ENUM">CONFIG_PHY_AND_SOFT_CTRL</parameter>
+ <parameter name="PHY_RLD2_CORE_CLKS_SHARING_ENUM">CORE_CLKS_SHARING_DISABLED</parameter>
+ <parameter name="PHY_RLD2_DEFAULT_IO" value="true" />
+ <parameter name="PHY_RLD2_DEFAULT_REF_CLK_FREQ" value="true" />
+ <parameter name="PHY_RLD2_IO_VOLTAGE" value="1.8" />
+ <parameter name="PHY_RLD2_MEM_CLK_FREQ_MHZ" value="533.333" />
+ <parameter name="PHY_RLD2_RATE_ENUM" value="RATE_HALF" />
+ <parameter name="PHY_RLD2_REF_CLK_JITTER_PS" value="10.0" />
+ <parameter name="PHY_RLD2_USER_AC_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_RLD2_USER_AC_MODE_ENUM" value="unset" />
+ <parameter name="PHY_RLD2_USER_AC_SLEW_RATE_ENUM" value="SLEW_RATE_FAST" />
+ <parameter name="PHY_RLD2_USER_CK_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_RLD2_USER_CK_MODE_ENUM" value="unset" />
+ <parameter name="PHY_RLD2_USER_CK_SLEW_RATE_ENUM" value="SLEW_RATE_FAST" />
+ <parameter name="PHY_RLD2_USER_DATA_IN_MODE_ENUM" value="unset" />
+ <parameter name="PHY_RLD2_USER_DATA_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_RLD2_USER_DATA_OUT_MODE_ENUM" value="unset" />
+ <parameter name="PHY_RLD2_USER_PING_PONG_EN" value="false" />
+ <parameter name="PHY_RLD2_USER_PLL_REF_CLK_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_RLD2_USER_REF_CLK_FREQ_MHZ" value="-1.0" />
+ <parameter name="PHY_RLD2_USER_RZQ_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_RLD3_CONFIG_ENUM" value="CONFIG_PHY_ONLY" />
+ <parameter name="PHY_RLD3_CORE_CLKS_SHARING_ENUM">CORE_CLKS_SHARING_DISABLED</parameter>
+ <parameter name="PHY_RLD3_DEFAULT_IO" value="true" />
+ <parameter name="PHY_RLD3_DEFAULT_REF_CLK_FREQ" value="true" />
+ <parameter name="PHY_RLD3_IO_VOLTAGE" value="1.2" />
+ <parameter name="PHY_RLD3_MEM_CLK_FREQ_MHZ" value="1066.667" />
+ <parameter name="PHY_RLD3_RATE_ENUM" value="RATE_QUARTER" />
+ <parameter name="PHY_RLD3_REF_CLK_JITTER_PS" value="10.0" />
+ <parameter name="PHY_RLD3_USER_AC_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_RLD3_USER_AC_MODE_ENUM" value="unset" />
+ <parameter name="PHY_RLD3_USER_AC_SLEW_RATE_ENUM" value="SLEW_RATE_FAST" />
+ <parameter name="PHY_RLD3_USER_CK_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_RLD3_USER_CK_MODE_ENUM" value="unset" />
+ <parameter name="PHY_RLD3_USER_CK_SLEW_RATE_ENUM" value="SLEW_RATE_FAST" />
+ <parameter name="PHY_RLD3_USER_DATA_IN_MODE_ENUM" value="unset" />
+ <parameter name="PHY_RLD3_USER_DATA_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_RLD3_USER_DATA_OUT_MODE_ENUM" value="unset" />
+ <parameter name="PHY_RLD3_USER_PING_PONG_EN" value="false" />
+ <parameter name="PHY_RLD3_USER_PLL_REF_CLK_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_RLD3_USER_REF_CLK_FREQ_MHZ" value="-1.0" />
+ <parameter name="PHY_RLD3_USER_RZQ_IO_STD_ENUM" value="unset" />
+ <parameter name="PLL_ADD_EXTRA_CLKS" value="0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_DUTY_CYCLE_GUI_5" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_DUTY_CYCLE_GUI_6" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_DUTY_CYCLE_GUI_7" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_DUTY_CYCLE_GUI_8" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_FREQ_MHZ_GUI_5" value="100.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_FREQ_MHZ_GUI_6" value="100.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_FREQ_MHZ_GUI_7" value="100.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_FREQ_MHZ_GUI_8" value="100.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_PHASE_DEG_GUI_5" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_PHASE_DEG_GUI_6" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_PHASE_DEG_GUI_7" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_PHASE_DEG_GUI_8" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_PHASE_PS_GUI_5" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_PHASE_PS_GUI_6" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_PHASE_PS_GUI_7" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_PHASE_PS_GUI_8" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_DUTY_CYCLE_GUI_5" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_DUTY_CYCLE_GUI_6" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_DUTY_CYCLE_GUI_7" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_DUTY_CYCLE_GUI_8" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_FREQ_MHZ_GUI_5" value="100.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_FREQ_MHZ_GUI_6" value="100.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_FREQ_MHZ_GUI_7" value="100.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_FREQ_MHZ_GUI_8" value="100.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_PHASE_GUI_5" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_PHASE_GUI_6" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_PHASE_GUI_7" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_PHASE_GUI_8" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_PHASE_SHIFT_UNIT_GUI_0" value="0" />
+ <parameter name="PLL_EXTRA_CLK_PHASE_SHIFT_UNIT_GUI_1" value="0" />
+ <parameter name="PLL_EXTRA_CLK_PHASE_SHIFT_UNIT_GUI_2" value="0" />
+ <parameter name="PLL_EXTRA_CLK_PHASE_SHIFT_UNIT_GUI_3" value="0" />
+ <parameter name="PLL_EXTRA_CLK_PHASE_SHIFT_UNIT_GUI_4" value="0" />
+ <parameter name="PLL_EXTRA_CLK_PHASE_SHIFT_UNIT_GUI_5" value="0" />
+ <parameter name="PLL_EXTRA_CLK_PHASE_SHIFT_UNIT_GUI_6" value="0" />
+ <parameter name="PLL_EXTRA_CLK_PHASE_SHIFT_UNIT_GUI_7" value="0" />
+ <parameter name="PLL_EXTRA_CLK_PHASE_SHIFT_UNIT_GUI_8" value="0" />
+ <parameter name="PLL_USER_NUM_OF_EXTRA_CLKS" value="0" />
+ <parameter name="PROTOCOL_ENUM" value="PROTOCOL_DDR4" />
+ <parameter name="SHORT_QSYS_INTERFACE_NAMES" value="true" />
+ <parameter name="SYS_INFO_DEVICE" value="10AX115U4F45I3SGES" />
+ <parameter name="SYS_INFO_DEVICE_FAMILY" value="Arria 10" />
+ <parameter name="SYS_INFO_DEVICE_SPEEDGRADE" value="3" />
+ <parameter name="SYS_INFO_UNIQUE_ID" value="$${FILENAME}_emif_0" />
+ </module>
+ <interconnectRequirement for="$system" name="qsys_mm.clockCrossingAdapter" value="HANDSHAKE" />
+ <interconnectRequirement for="$system" name="qsys_mm.enableEccProtection" value="FALSE" />
+ <interconnectRequirement for="$system" name="qsys_mm.insertDefaultSlave" value="FALSE" />
+ <interconnectRequirement for="$system" name="qsys_mm.maxAdditionalLatency" value="1" />
+</system>