diff --git a/applications/lofar2/libraries/ddrctrl/src/vhdl/ddrctrl_address_counter.vhd b/applications/lofar2/libraries/ddrctrl/src/vhdl/ddrctrl_address_counter.vhd
index f0cf079b5a95b9cd9682181815e94d3592ab825f..f8d6c54ed0d3a7142a25958812991925c68c01f7 100644
--- a/applications/lofar2/libraries/ddrctrl/src/vhdl/ddrctrl_address_counter.vhd
+++ b/applications/lofar2/libraries/ddrctrl/src/vhdl/ddrctrl_address_counter.vhd
@@ -18,7 +18,7 @@
--
-------------------------------------------------------------------------------
-- Author: Job van Wee
--- Purpose: Create address by counting input valids
+-- Purpose: Creates address by counting input valids
--
-- Description:
-- The counter starts on the first valid = '1' clockcylce, the counter stops
@@ -41,43 +41,44 @@ USE dp_lib.dp_stream_pkg.ALL;
ENTITY ddrctrl_address_counter IS
GENERIC (
- g_tech_ddr : t_c_tech_ddr;
- g_sim_model : BOOLEAN := TRUE
+ g_tech_ddr : t_c_tech_ddr; -- type of memory
+ g_sim_model : BOOLEAN := TRUE -- determens if this is a simulation
);
PORT (
- clk : IN STD_LOGIC;
rst : IN STD_LOGIC;
- in_sosi : IN t_dp_sosi;
- out_mosi : OUT t_mem_ctlr_mosi := c_mem_ctlr_mosi_rst
+ in_sosi : IN t_dp_sosi; -- input data
+ out_mosi : OUT t_mem_ctlr_mosi := c_mem_ctlr_mosi_rst -- output data
);
END ddrctrl_address_counter;
ARCHITECTURE rtl OF ddrctrl_address_counter IS
- CONSTANT c_data_w : NATURAL := func_tech_ddr_ctlr_data_w( g_tech_ddr ); --576
- CONSTANT c_adr_w : NATURAL := sel_a_b(g_sim_model, 4, func_tech_ddr_ctlr_address_w( g_tech_ddr )); --27;
- CONSTANT c_max_adr : NATURAL := 2**(c_adr_w) - 1;
+ -- constants for readability
+ CONSTANT c_data_w : NATURAL := func_tech_ddr_ctlr_data_w( g_tech_ddr ); -- the with of the input data and output data, 576
+ CONSTANT c_adr_w : NATURAL := sel_a_b(g_sim_model, 4, func_tech_ddr_ctlr_address_w( g_tech_ddr )); -- the lengt of the address vector, for simulation this is smaller, otherwise the simulation would take to long, 27
+ CONSTANT c_max_adr : NATURAL := 2**(c_adr_w) - 1; -- the maximal address that is possible within the vector length of the address
- SIGNAL s_adr : NATURAL range 0 to 2**(c_adr_w)-1 := 0;
+ -- signal for storing address
+ SIGNAL s_adr : NATURAL range 0 to 2**(c_adr_w)-1 := 0; -- a signal that contains the address
BEGIN
+ -- The data is directly put through.
out_mosi.wrdata(c_data_w - 1 DOWNTO 0) <= in_sosi.data(c_data_w - 1 DOWNTO 0);
out_mosi.wr <= in_sosi.valid;
out_mosi.address(c_adr_w -1 DOWNTO 0) <= TO_UVEC(s_adr, c_adr_w);
- p_clk : PROCESS(clk)
+ -- Increments the address each time in_sosi.valid = '1', if address = c_max_adr the address is reset to 0.
+ p_adr : PROCESS(rst, in_sosi.valid)
BEGIN
- IF rising_edge(clk) THEN
- IF rst = '1' THEN
+ IF rst = '1' THEN
+ s_adr <= 0;
+ ELSIF rising_edge(in_sosi.valid) THEN
+ IF s_adr = c_max_adr THEN
s_adr <= 0;
- ELSIF in_sosi.valid = '1' THEN
- IF (s_adr = c_max_adr) THEN
- s_adr <= 0;
- ELSE
- s_adr <= s_adr + 1;
- END IF;
+ ELSE
+ s_adr <= s_adr + 1;
END IF;
END IF;
END PROCESS;
diff --git a/applications/lofar2/libraries/ddrctrl/tb/vhdl/tb_ddrctrl_address_counter.vhd b/applications/lofar2/libraries/ddrctrl/tb/vhdl/tb_ddrctrl_address_counter.vhd
index 3a000800679663e31c860cca2791bfd4e01d3bbb..0f3e4d414a0f5f513b4fdfc341698fc4dd164bf5 100644
--- a/applications/lofar2/libraries/ddrctrl/tb/vhdl/tb_ddrctrl_address_counter.vhd
+++ b/applications/lofar2/libraries/ddrctrl/tb/vhdl/tb_ddrctrl_address_counter.vhd
@@ -33,75 +33,60 @@ USE common_lib.common_pkg.ALL;
ENTITY tb_ddrctrl_address_counter IS
GENERIC (
- g_tech_ddr : t_c_tech_ddr := c_tech_ddr4_8g_1600m;
- g_sim_model : BOOLEAN := TRUE
+ g_tech_ddr : t_c_tech_ddr := c_tech_ddr4_8g_1600m; -- type of memory
+ g_sim_model : BOOLEAN := TRUE; -- determens if this is a simulation
+ g_sim_length : NATURAL := 52 -- determens the length of the duration of the test
);
END tb_ddrctrl_address_counter;
ARCHITECTURE tb OF tb_ddrctrl_address_counter IS
- CONSTANT c_clk_freq : NATURAL := 200; -- MHz
- CONSTANT c_clk_period : TIME := (10**6 / c_clk_freq) * 1 ps;
+ -- constants for running the testbench
+ CONSTANT c_clk_freq : NATURAL := 200; -- clock frequency in MHz
+ CONSTANT c_clk_period : TIME := (10**6/c_clk_freq)*1 ps; -- clock period, 5 ns
- CONSTANT c_data_w : NATURAL := func_tech_ddr_ctlr_data_w( g_tech_ddr ); -- 576
- CONSTANT c_adr_w : NATURAL := 4;
- CONSTANT c_max_adr : NATURAL := 2**c_adr_w;
+ -- constants for running the test
+ CONSTANT c_data_w : NATURAL := func_tech_ddr_ctlr_data_w( g_tech_ddr ); -- in and output data vector with, 576
+ CONSTANT c_adr_w : NATURAL := 4; -- address with in simulation
+ CONSTANT c_adr_size : NATURAL := 2**c_adr_w; -- address size in simulation
- SIGNAL tb_end : STD_LOGIC := '0';
+ -- input signals for ddrctrl_address_counter.vhd
SIGNAL clk : STD_LOGIC := '1';
- SIGNAL rst : STD_LOGIC;
+ SIGNAL rst : STD_LOGIC := '0';
+ SIGNAL in_sosi : t_dp_sosi := c_dp_sosi_init; -- signal which is the input for ddrctrl_address_counter.vhd
- SIGNAL in_data : STD_LOGIC_VECTOR(c_data_w-1 DOWNTO 0);
- SIGNAL in_data_enable : STD_LOGIC;
- SIGNAL in_sosi : t_dp_sosi := c_dp_sosi_init;
+ -- output signal from ddrctrl_address_counter.vhd
+ SIGNAL out_mosi : t_mem_ctlr_mosi := c_mem_ctlr_mosi_rst; -- signal which is the output from ddrctrl_address_counter.vhd
- SIGNAL out_mosi : t_mem_ctlr_mosi := c_mem_ctlr_mosi_rst;
+ -- testbench signals
+ SIGNAL tb_end : STD_LOGIC := '0'; -- signal to turn the testbench off
+ SIGNAL in_data : STD_LOGIC_VECTOR(c_data_w-1 DOWNTO 0); -- signal which contains the data that is set as input
+ SIGNAL in_data_enable : STD_LOGIC; -- signal to determen if in_data is ready for reading
+ SIGNAL lag_due_reset : NATURAL := 0; -- signal to hold the address lag after a rest
BEGIN
- -- if these ASSERT's get uncommented u can see that modelsim does take a few itteration before the warning gets asserted. These asserts are also present in p_verify
-
- --ASSERT in_sosi.data(c_data_w - 1 DOWNTO 0) = out_mosi.wrdata(c_data_w - 1 DOWNTO 0) REPORT "in_sosi.data does not match out_mosi.wrdata" SEVERITY ERROR; -- gives error if in_sosi and out_mosi do not match
- --ASSERT in_sosi.valid = out_mosi.wr REPORT "in_sosi.valid does not match out_mosi.wr" SEVERITY ERROR;
- --ASSERT in_sosi.data(c_data_w - 1 DOWNTO 0) /= out_mosi.wrdata(c_data_w - 1 DOWNTO 0) REPORT "in_sosi.data does match out_mosi.wrdata" SEVERITY WARNING; -- gives warning if in_sosi and out_mosi do match
- --ASSERT in_sosi.valid /= out_mosi.wr REPORT "in_sosi.valid does match out_mosi.wr" SEVERITY WARNING;
-
- in_sosi.data(c_data_w - 1 DOWNTO 0) <= in_data(c_data_w - 1 DOWNTO 0);
- in_sosi.valid <= in_data_enable;
+ -- wiring the input signals to the inputs of the testbench
+ in_sosi.data(c_data_w-1 DOWNTO 0) <= in_data(c_data_w-1 DOWNTO 0);
+ in_sosi.valid <= in_data_enable;
+ -- generating clock
clk <= NOT clk OR tb_end AFTER c_clk_period/2;
- p_mm : PROCESS
+ -- excecuting the test
+ p_test : PROCESS
BEGIN
- rst <= '1', '0' AFTER c_clk_period/10;
-
+ -- initialize inputs
tb_end <= '0';
in_data <= (OTHERS => '0');
in_data_enable <= '0';
+ WAIT UNTIL rising_edge(clk);
- WAIT UNTIL rising_edge(clk); -- align to rising edge
- WAIT FOR c_clk_period*10;
-
- FOR I IN 0 TO 6 LOOP
- in_data_enable <= '1';
- in_data <= NOT in_data;
- ASSERT I = TO_UINT(out_mosi.address) REPORT "Wrong address, I = " & NATURAL'image(I) SEVERITY ERROR;
- WAIT FOR c_clk_period*1;
- in_data_enable <= '0';
- WAIT FOR c_clk_period*2;
- END LOOP;
-
- WAIT FOR c_clk_period*1;
- rst <= '1'; -- reset
- WAIT FOR c_clk_period*1;
- rst <= '0';
- WAIT FOR c_clk_period*1;
-
- FOR I IN 0 TO 20 LOOP
- ASSERT I = TO_UINT(out_mosi.address) OR I - c_max_adr = TO_UINT(out_mosi.address) REPORT "Wrong address, I = " & NATURAL'image(I) SEVERITY ERROR;
+ -- changing inputs to start the address counting
+ FOR I IN 0 TO g_sim_length-1 LOOP
in_data_enable <= '1';
in_data <= NOT in_data;
WAIT FOR c_clk_period*1;
@@ -109,41 +94,64 @@ BEGIN
WAIT FOR c_clk_period*2;
END LOOP;
- WAIT FOR c_clk_period*20;
-
+ -- stopping the test
+ WAIT FOR c_clk_period*4;
tb_end <= '1';
- WAIT;
-
+ ASSERT FALSE REPORT "Test: OK" SEVERITY FAILURE;
END PROCESS;
- p_verify : PROCESS
+ -- verifying if the data is correct and if valid is correct
+ p_verify_data_valid : PROCESS
BEGIN
WAIT UNTIL rising_edge(clk);
IF rising_edge(clk) THEN
- ASSERT in_sosi.data(c_data_w - 1 DOWNTO 0) = out_mosi.wrdata(c_data_w - 1 DOWNTO 0) REPORT "in_sosi.data does not match out_mosi.wrdata" SEVERITY ERROR; -- gives error if in_sosi and out_mosi do not match
- ASSERT in_sosi.valid = out_mosi.wr REPORT "in_sosi.valid does not match out_mosi.wr" SEVERITY ERROR;
- --ASSERT in_sosi.data(c_data_w - 1 DOWNTO 0) /= out_mosi.wrdata(c_data_w - 1 DOWNTO 0) REPORT "in_sosi.data does match out_mosi.wrdata" SEVERITY WARNING; -- gives warning if in_sosi and out_mosi do match
- --ASSERT in_sosi.valid /= out_mosi.wr REPORT "in_sosi.valid does match out_mosi.wr" SEVERITY WARNING;
+ ASSERT in_sosi.data(c_data_w-1 DOWNTO 0) = out_mosi.wrdata(c_data_w-1 DOWNTO 0) REPORT "in_sosi.data does not match out_mosi.wrdata" SEVERITY ERROR;
+ ASSERT in_sosi.valid = out_mosi.wr REPORT "in_sosi.valid does not match out_mosi.wr" SEVERITY ERROR;
END IF;
END PROCESS;
+ -- excecuting the reset test
+ p_test_reset : PROCESS
+ BEGIN
+ rst <= '0';
+ WAIT FOR c_clk_period*(c_adr_size+3);
+ IF lag_due_reset + TO_UINT(out_mosi.address) >= c_adr_size THEN
+ lag_due_reset <= lag_due_reset+TO_UINT(out_mosi.address)-c_adr_size;
+ ELSE
+ lag_due_reset <= lag_due_reset+TO_UINT(out_mosi.address);
+ END IF;
+ rst <= '1';
+ WAIT FOR c_clk_period*1;
+ END PROCESS;
+
+ -- verifying if the address is correct by keeping trach of the address
+ p_verify_address : PROCESS
+ BEGIN
+ FOR I IN 0 TO c_adr_size-1 LOOP
+ WAIT UNTIL out_mosi.wr = '1';
+ IF rst = '1' THEN
+ WAIT UNTIL out_mosi.wr = '1';
+ END IF;
+ IF I >= lag_due_reset THEN
+ ASSERT I-lag_due_reset = TO_UINT(out_mosi.address) REPORT "Wrong address, 1, I = " & NATURAL'image(I-lag_due_reset) & ", address = " & NATURAL'image(TO_UINT(out_mosi.address)) SEVERITY ERROR;
+ ELSE
+ ASSERT (I-lag_due_reset)+c_adr_size = TO_UINT(out_mosi.address) REPORT "Wrong address, 2, I = " & NATURAL'image((I-lag_due_reset)+c_adr_size) & ", address = " & NATURAL'image(TO_UINT(out_mosi.address)) SEVERITY ERROR;
+ END IF;
+ END LOOP;
+ END PROCESS;
+
+
+ -- DUT
u_ddrctrl_address_counter : ENTITY work.ddrctrl_address_counter
GENERIC MAP (
g_tech_ddr => g_tech_ddr,
g_sim_model => g_sim_model
)
PORT MAP (
- clk => clk,
rst => rst,
in_sosi => in_sosi,
out_mosi => out_mosi
-
);
END tb;
-
-
-
-
-