diff --git a/libraries/technology/ddr/hdllib.cfg b/libraries/technology/ddr/hdllib.cfg
index 4f653f1ac02336cf0a73521e35b844d7713c83ae..730e3de8131d10d1ab7bf97230173d742ad51f78 100644
--- a/libraries/technology/ddr/hdllib.cfg
+++ b/libraries/technology/ddr/hdllib.cfg
@@ -15,6 +15,7 @@ hdl_lib_uses_ip = ip_stratixiv_ddr3_uphy_4g_800_master
ip_arria10_e3sge3_ddr4_8g_2400
ip_arria10_e1sg_ddr4_4g_1600
ip_arria10_e1sg_ddr4_8g_1600
+ ip_arria10_e1sg_ddr4_16g_1600
ip_arria10_e1sg_ddr4_4g_2000
ip_arria10_e1sg_ddr4_8g_2400
ip_arria10_e2sg_ddr4_8g_1600
@@ -37,6 +38,7 @@ hdl_lib_disclose_library_clause_names =
ip_arria10_e3sge3_ddr4_8g_2400 ip_arria10_e3sge3_ddr4_8g_2400_altera_emif_151
ip_arria10_e1sg_ddr4_4g_1600 ip_arria10_e1sg_ddr4_4g_1600_altera_emif_180
ip_arria10_e1sg_ddr4_8g_1600 ip_arria10_e1sg_ddr4_8g_1600_altera_emif_180
+ ip_arria10_e1sg_ddr4_16g_1600 ip_arria10_e1sg_ddr4_16g_1600_altera_emif_180
ip_arria10_e1sg_ddr4_4g_2000 ip_arria10_e1sg_ddr4_4g_2000_altera_emif_180
ip_arria10_e1sg_ddr4_8g_2400 ip_arria10_e1sg_ddr4_8g_2400_altera_emif_180
ip_stratixiv_ddr3_mem_model ip_stratixiv_ddr3_mem_model_lib
diff --git a/libraries/technology/ddr/tech_ddr_arria10_e1sg.vhd b/libraries/technology/ddr/tech_ddr_arria10_e1sg.vhd
index 7f86edd95ac1fa3df17df07281a54373525a900b..c59f216e78c90925321dee6602f3f561add69899 100644
--- a/libraries/technology/ddr/tech_ddr_arria10_e1sg.vhd
+++ b/libraries/technology/ddr/tech_ddr_arria10_e1sg.vhd
@@ -36,6 +36,7 @@
-- Declare IP libraries to ensure default binding in simulation. The IP library clause is ignored by synthesis.
LIBRARY ip_arria10_e1sg_ddr4_4g_1600_altera_emif_180;
LIBRARY ip_arria10_e1sg_ddr4_8g_1600_altera_emif_180;
+LIBRARY ip_arria10_e1sg_ddr4_16g_1600_altera_emif_180;
LIBRARY ip_arria10_e1sg_ddr4_4g_2000_altera_emif_180;
LIBRARY ip_arria10_e1sg_ddr4_8g_2400_altera_emif_180;
@@ -258,5 +259,59 @@ BEGIN
ctlr_miso.cal_fail <= local_cal_fail;
END GENERATE;
+
+ gen_ip_arria10_e1sg_ddr4_16g_1600 : IF g_tech_ddr.name="DDR4" AND c_gigabytes=16 AND g_tech_ddr.mts=1600 GENERATE
+
+ u_ip_arria10_e1sg_ddr4_16g_1600 : ip_arria10_e1sg_ddr4_16g_1600
+ PORT MAP (
+ amm_ready_0 => ctlr_miso.waitrequest_n, -- ctrl_amm_avalon_slave_0.waitrequest_n
+ amm_read_0 => ctlr_mosi.rd, -- .read
+ amm_write_0 => ctlr_mosi.wr, -- .write
+ amm_address_0 => ctlr_mosi.address(c_ctlr_address_w-1 DOWNTO 0), -- .address
+ amm_readdata_0 => ctlr_miso.rddata(c_ctlr_data_w-1 DOWNTO 0), -- .readdata
+ amm_writedata_0 => ctlr_mosi.wrdata(c_ctlr_data_w-1 DOWNTO 0), -- .writedata
+ amm_burstcount_0 => ctlr_mosi.burstsize(g_tech_ddr.maxburstsize_w-1 DOWNTO 0), -- .burstcount
+ amm_byteenable_0 => (OTHERS=>'1'), -- .byteenable
+ amm_readdatavalid_0 => ctlr_miso.rdval, -- .readdatavalid
+ emif_usr_clk => i_ctlr_gen_clk, -- emif_usr_clk_clock_source.clk
+ emif_usr_reset_n => ctlr_gen_rst_n, -- emif_usr_reset_reset_source.reset_n
+ global_reset_n => ref_rst_n, -- global_reset_reset_sink.reset_n
+ mem_ck => phy_ou.ck(g_tech_ddr.ck_w-1 DOWNTO 0), -- mem_conduit_end.mem_ck
+ mem_ck_n => phy_ou.ck_n(g_tech_ddr.ck_w-1 DOWNTO 0), -- .mem_ck_n
+ mem_a => phy_ou.a(g_tech_ddr.a_w-1 DOWNTO 0), -- .mem_a
+ sl(mem_act_n) => phy_ou.act_n, -- .mem_act_n
+ mem_ba => phy_ou.ba(g_tech_ddr.ba_w-1 DOWNTO 0), -- .mem_ba
+ mem_bg => phy_ou.bg(g_tech_ddr.bg_w-1 DOWNTO 0), -- .mem_bg
+ mem_cke => phy_ou.cke(g_tech_ddr.cke_w-1 DOWNTO 0), -- .mem_cke
+ mem_cs_n => phy_ou.cs_n(g_tech_ddr.cs_w-1 DOWNTO 0), -- .mem_cs_n
+ mem_odt => phy_ou.odt(g_tech_ddr.odt_w-1 DOWNTO 0), -- .mem_odt
+ sl(mem_reset_n) => phy_ou.reset_n, -- .mem_reset_n
+ sl(mem_par) => phy_ou.par, -- .mem_par
+ mem_alert_n => slv(phy_in.alert_n), -- .mem_alert_n
+ mem_dqs => phy_io.dqs(g_tech_ddr.dqs_w-1 DOWNTO 0), -- .mem_dqs
+ mem_dqs_n => phy_io.dqs_n(g_tech_ddr.dqs_w-1 DOWNTO 0), -- .mem_dqs_n
+ mem_dq => phy_io.dq(g_tech_ddr.dq_w-1 DOWNTO 0), -- .mem_dq
+ mem_dbi_n => phy_io.dbi_n(g_tech_ddr.dbi_w-1 DOWNTO 0), -- .mem_dbi_n
+ oct_rzqin => phy_in.oct_rzqin, -- oct_conduit_end.oct_rzqin
+ pll_ref_clk => ref_clk, -- pll_ref_clk_clock_sink.clk
+ local_cal_success => local_cal_success, -- status_conduit_end.local_cal_success
+ local_cal_fail => local_cal_fail -- .local_cal_fail
+ );
+
+ -- Signals in DDR3 that are not available with DDR4:
+ --
+ --avl_burstbegin => ctlr_mosi.burstbegin, -- .beginbursttransfer
+ -- beginbursttransfer is obselete for new Avalon designs, because the slave can count valid data itself to know when a new burst starts
+ --
+ --local_init_done => ctlr_miso.done, -- status.local_init_done
+ -- local_init_done = ctlr_init_done originally and mapped to ctlr_miso.done for the DDR3 IP. For the DDR4 IP the local_cal_success and
+ -- NOT local_cal_fail seem to serve as local_init_done
+
+ ctlr_miso.done <= local_cal_success AND NOT local_cal_fail WHEN rising_edge(i_ctlr_gen_clk);
+ ctlr_miso.cal_ok <= local_cal_success;
+ ctlr_miso.cal_fail <= local_cal_fail;
+
+ END GENERATE;
+
END str;
diff --git a/libraries/technology/ddr/tech_ddr_component_pkg.vhd b/libraries/technology/ddr/tech_ddr_component_pkg.vhd
index 52d1159aa6d8458ee1b02e96abd86df36e5f7cd2..3d9dabc5906c609bbf7e155314c968be72d4733f 100644
--- a/libraries/technology/ddr/tech_ddr_component_pkg.vhd
+++ b/libraries/technology/ddr/tech_ddr_component_pkg.vhd
@@ -567,6 +567,43 @@ PACKAGE tech_ddr_component_pkg IS
);
END COMPONENT;
+ COMPONENT ip_arria10_e1sg_ddr4_16g_1600 IS
+ PORT (
+ amm_ready_0 : out std_logic; -- ctrl_amm_avalon_slave_0.waitrequest_n
+ amm_read_0 : in std_logic := '0'; -- .read
+ amm_write_0 : in std_logic := '0'; -- .write
+ amm_address_0 : in std_logic_vector(27 downto 0) := (others => '0'); -- .address
+ amm_readdata_0 : out std_logic_vector(575 downto 0); -- .readdata
+ amm_writedata_0 : in std_logic_vector(575 downto 0) := (others => '0'); -- .writedata
+ amm_burstcount_0 : in std_logic_vector(6 downto 0) := (others => '0'); -- .burstcount
+ amm_byteenable_0 : in std_logic_vector(71 downto 0) := (others => '0'); -- .byteenable
+ amm_readdatavalid_0 : out std_logic; -- .readdatavalid
+ emif_usr_clk : out std_logic; -- emif_usr_clk_clock_source.clk
+ emif_usr_reset_n : out std_logic; -- emif_usr_reset_reset_source.reset_n
+ global_reset_n : in std_logic := '0'; -- global_reset_reset_sink.reset_n
+ mem_ck : out std_logic_vector(1 downto 0); -- mem_conduit_end.mem_ck
+ mem_ck_n : out std_logic_vector(1 downto 0); -- .mem_ck_n
+ mem_a : out std_logic_vector(16 downto 0); -- .mem_a
+ mem_act_n : out std_logic_vector(0 downto 0); -- .mem_act_n
+ mem_ba : out std_logic_vector(1 downto 0); -- .mem_ba
+ mem_bg : out std_logic_vector(1 downto 0); -- .mem_bg
+ mem_cke : out std_logic_vector(1 downto 0); -- .mem_cke
+ mem_cs_n : out std_logic_vector(1 downto 0); -- .mem_cs_n
+ mem_odt : out std_logic_vector(1 downto 0); -- .mem_odt
+ mem_reset_n : out std_logic_vector(0 downto 0); -- .mem_reset_n
+ mem_par : out std_logic_vector(0 downto 0); -- .mem_par
+ mem_alert_n : in std_logic_vector(0 downto 0) := (others => '0'); -- .mem_alert_n
+ mem_dqs : inout std_logic_vector(8 downto 0) := (others => '0'); -- .mem_dqs
+ mem_dqs_n : inout std_logic_vector(8 downto 0) := (others => '0'); -- .mem_dqs_n
+ mem_dq : inout std_logic_vector(71 downto 0) := (others => '0'); -- .mem_dq
+ mem_dbi_n : inout std_logic_vector(8 downto 0) := (others => '0'); -- .mem_dbi_n
+ oct_rzqin : in std_logic := '0'; -- oct_conduit_end.oct_rzqin
+ pll_ref_clk : in std_logic := '0'; -- pll_ref_clk_clock_sink.clk
+ local_cal_success : out std_logic; -- status_conduit_end.local_cal_success
+ local_cal_fail : out std_logic -- .local_cal_fail
+ );
+ END COMPONENT;
+
-- Manually derived VHDL entity from VHDL file $RADIOHDL_BUILD_DIR/sim/ip_arria10_e1sg_ddr4_4g_2000.vhd
COMPONENT ip_arria10_e1sg_ddr4_4g_2000 IS
PORT (
diff --git a/libraries/technology/ddr/tech_ddr_pkg.vhd b/libraries/technology/ddr/tech_ddr_pkg.vhd
index 8cebf0ecb4af7a422b89a81ba2fed826a717735b..6e5dd051ec78d0c1f9711180ca5358fe9aac9779 100644
--- a/libraries/technology/ddr/tech_ddr_pkg.vhd
+++ b/libraries/technology/ddr/tech_ddr_pkg.vhd
@@ -97,6 +97,7 @@ PACKAGE tech_ddr_pkg IS
CONSTANT c_tech_ddr4_4g_1600m : t_c_tech_ddr := ("DDR4", 1600, TRUE, "DUAL ", 17, 15, 10, 2, 72, 9, 0, 9, 2, 1, 1, 1, 0, 1, 0, 8, 3, 8, 64, 7);
CONSTANT c_tech_ddr4_8g_1600m : t_c_tech_ddr := ("DDR4", 1600, TRUE, "DUAL ", 17, 15, 10, 2, 72, 9, 0, 9, 2, 2, 2, 2, 1, 2, 0, 8, 3, 8, 64, 7);
+ CONSTANT c_tech_ddr4_16g_1600m : t_c_tech_ddr := ("DDR4", 1600, TRUE, "DUAL ", 17, 16, 10, 2, 72, 9, 0, 9, 2, 2, 2, 2, 1, 2, 0, 8, 3, 8, 64, 7);
CONSTANT c_tech_ddr4_8g_1600m_64 : t_c_tech_ddr := ("DDR4", 1600, TRUE, "DUAL ", 17, 15, 10, 2, 64, 8, 0, 8, 2, 2, 2, 2, 1, 2, 0, 8, 3, 8, 64, 7);
CONSTANT c_tech_ddr4_4g_2000m : t_c_tech_ddr := ("DDR4", 2000, TRUE, "DUAL ", 17, 15, 10, 2, 72, 9, 0, 9, 2, 1, 1, 1, 0, 1, 0, 8, 3, 8, 64, 7);
CONSTANT c_tech_ddr4_8g_2400m : t_c_tech_ddr := ("DDR4", 2400, TRUE, "DUAL ", 17, 15, 10, 2, 72, 9, 0, 9, 2, 2, 2, 2, 1, 2, 0, 8, 3, 8, 64, 7);
diff --git a/libraries/technology/ip_arria10_e1sg/ddr4_16g_1600/compile_ip.tcl b/libraries/technology/ip_arria10_e1sg/ddr4_16g_1600/compile_ip.tcl
new file mode 100644
index 0000000000000000000000000000000000000000..fa2a0fbf160c94be212b1cd575ac68ba073288bf
--- /dev/null
+++ b/libraries/technology/ip_arria10_e1sg/ddr4_16g_1600/compile_ip.tcl
@@ -0,0 +1,34 @@
+#------------------------------------------------------------------------------
+#
+# Copyright (C) 2017
+# ASTRON (Netherlands Institute for Radio Astronomy) <http://www.astron.nl/>
+# JIVE (Joint Institute for VLBI in Europe) <http://www.jive.nl/>
+# P.O.Box 2, 7990 AA Dwingeloo, The Netherlands
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+#------------------------------------------------------------------------------
+
+# This file is based on generated file mentor/msim_setup.tcl.
+# - the values for modelsim_search_libraries key in the hdllib.cfg follow from altera libraries vmap section in the msim_setup.tcl
+# - vmap for the IP specific libraries and compile all IP source files into those libraries similar as in the msim_setup.tcl
+# - replace QSYS_SIMDIR by IP_DIR
+# - if the testbench is also generated with QSYS then only the IP_TBDIR files are needed, because these also contain the source files.
+
+#vlib ./work/ ;# Assume library work already exist
+
+
+set IP_DIR "$env(RADIOHDL_BUILD_DIR)/$env(BUILDSET)/qsys-generate/ip_arria10_e1sg_ddr4_16g_1600/sim"
+
+ vcom "$IP_DIR/ip_arria10_e1sg_ddr4_16g_1600.vhd"
diff --git a/libraries/technology/ip_arria10_e1sg/ddr4_16g_1600/copy_hex_files.tcl b/libraries/technology/ip_arria10_e1sg/ddr4_16g_1600/copy_hex_files.tcl
new file mode 100644
index 0000000000000000000000000000000000000000..b6d7c0dbb9fcc6c2fc33dee4ecf6dbb234260556
--- /dev/null
+++ b/libraries/technology/ip_arria10_e1sg/ddr4_16g_1600/copy_hex_files.tcl
@@ -0,0 +1,33 @@
+#------------------------------------------------------------------------------
+#
+# Copyright (C) 2015
+# ASTRON (Netherlands Institute for Radio Astronomy) <http://www.astron.nl/>
+# JIVE (Joint Institute for VLBI in Europe) <http://www.jive.nl/>
+# P.O.Box 2, 7990 AA Dwingeloo, The Netherlands
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+#------------------------------------------------------------------------------
+
+# This file is based on Qsys-generated file generated/sim/mentor/msim_setup.tcl
+
+set IP_DIR "$env(RADIOHDL_BUILD_DIR)/$env(BUILDSET)/qsys-generate/ip_arria10_e1sg_ddr4_16g_1600/sim"
+
+# Copy ROM/RAM files to simulation directory
+if {[file isdirectory $IP_DIR]} {
+ file copy -force $IP_DIR/../altera_emif_arch_nf_151/sim/ip_arria10_e1sg_ddr4_8g_1600_altera_emif_arch_nf_151_4thorvi_seq_cal_sim.hex ./
+ file copy -force $IP_DIR/../altera_emif_arch_nf_151/sim/ip_arria10_e1sg_ddr4_8g_1600_altera_emif_arch_nf_151_4thorvi_seq_cal_synth.hex ./
+ file copy -force $IP_DIR/../altera_emif_arch_nf_151/sim/ip_arria10_e1sg_ddr4_8g_1600_altera_emif_arch_nf_151_4thorvi_seq_params_sim.hex ./
+ file copy -force $IP_DIR/../altera_emif_arch_nf_151/sim/ip_arria10_e1sg_ddr4_8g_1600_altera_emif_arch_nf_151_4thorvi_seq_params_synth.hex ./
+}
diff --git a/libraries/technology/ip_arria10_e1sg/ddr4_16g_1600/hdllib.cfg b/libraries/technology/ip_arria10_e1sg/ddr4_16g_1600/hdllib.cfg
new file mode 100644
index 0000000000000000000000000000000000000000..4c7c7b3043c3f807960e25c6112e09d414d3514d
--- /dev/null
+++ b/libraries/technology/ip_arria10_e1sg/ddr4_16g_1600/hdllib.cfg
@@ -0,0 +1,25 @@
+hdl_lib_name = ip_arria10_e1sg_ddr4_16g_1600
+hdl_library_clause_name = ip_arria10_e1sg_ddr4_16g_1600_altera_emif_180
+hdl_lib_uses_synth =
+hdl_lib_uses_sim = ip_arria10_e1sg_altera_merlin_master_translator_180 ip_arria10_e1sg_altera_emif_cal_slave_nf_180 ip_arria10_e1sg_altera_avalon_onchip_memory2_180 ip_arria10_e1sg_altera_mm_interconnect_180 ip_arria10_e1sg_altera_reset_controller_180 ip_arria10_e1sg_altera_emif_arch_nf_180 ip_arria10_e1sg_altera_emif_180 ip_arria10_e1sg_altera_avalon_mm_bridge_180 ip_arria10_e1sg_altera_merlin_slave_translator_180 ip_arria10_e1sg_altera_avalon_sc_fifo_180 ip_arria10_e1sg_altera_avalon_st_packets_to_bytes_180 ip_arria10_e1sg_altera_ip_col_if_180 ip_arria10_e1sg_altera_jtag_dc_streaming_180 ip_arria10_e1sg_alt_mem_if_jtag_master_180 ip_arria10_e1sg_altera_avalon_st_bytes_to_packets_180 ip_arria10_e1sg_altera_avalon_packets_to_master_180 ip_arria10_e1sg_channel_adapter_180 ip_arria10_e1sg_timing_adapter_180
+
+hdl_lib_technology = ip_arria10_e1sg
+
+synth_files =
+
+test_bench_files =
+
+
+[modelsim_project_file]
+modelsim_compile_ip_files =
+ #$RADIOHDL_WORK/libraries/technology/ip_arria10_e1sg/ddr4_16g_1600/compile_ip.tcl
+
+
+[quartus_project_file]
+quartus_qip_files =
+ $RADIOHDL_BUILD_DIR/<buildset_name>/qsys-generate/ip_arria10_e1sg_ddr4_16g_1600/ip_arria10_e1sg_ddr4_16g_1600.qip
+
+[generate_ip_libs]
+qsys-generate_ip_files =
+ ip_arria10_e1sg_ddr4_16g_1600.qsys
+
diff --git a/libraries/technology/ip_arria10_e1sg/ddr4_16g_1600/ip_arria10_e1sg_ddr4_16g_1600.qsys b/libraries/technology/ip_arria10_e1sg/ddr4_16g_1600/ip_arria10_e1sg_ddr4_16g_1600.qsys
new file mode 100644
index 0000000000000000000000000000000000000000..b891f4ac16f6bd2a654e244bb441d490d28b71a0
--- /dev/null
+++ b/libraries/technology/ip_arria10_e1sg/ddr4_16g_1600/ip_arria10_e1sg_ddr4_16g_1600.qsys
@@ -0,0 +1,1316 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<system name="ip_arria10_e1sg_ddr4_16g_1600">
+ <component
+ name="$${FILENAME}"
+ displayName="$${FILENAME}"
+ version="1.0"
+ description=""
+ tags="AUTHORSHIP=Intel Corporation /// INTERNAL_COMPONENT=true"
+ categories="System"
+ tool="QsysPro" />
+ <parameter name="bonusData"><![CDATA[bonusData
+{
+ element emif_0
+ {
+ datum _sortIndex
+ {
+ value = "0";
+ type = "int";
+ }
+ }
+}
+]]></parameter>
+ <parameter name="clockCrossingAdapter" value="HANDSHAKE" />
+ <parameter name="device" value="10AX115U2F45E1SG" />
+ <parameter name="deviceFamily" value="Arria 10" />
+ <parameter name="deviceSpeedGrade" value="1" />
+ <parameter name="fabricMode" value="QSYS" />
+ <parameter name="generateLegacySim" value="false" />
+ <parameter name="generationId" value="0" />
+ <parameter name="globalResetBus" value="false" />
+ <parameter name="hdlLanguage" value="VERILOG" />
+ <parameter name="hideFromIPCatalog" value="true" />
+ <parameter name="lockedInterfaceDefinition" value="" />
+ <parameter name="maxAdditionalLatency" value="1" />
+ <parameter name="sopcBorderPoints" value="false" />
+ <parameter name="systemHash" value="0" />
+ <parameter name="systemInfos"><![CDATA[<systemInfosDefinition>
+ <connPtSystemInfos>
+ <entry>
+ <key>ctrl_amm_0</key>
+ <value>
+ <connectionPointName>ctrl_amm_0</connectionPointName>
+ <suppliedSystemInfos/>
+ <consumedSystemInfos>
+ <entry>
+ <key>ADDRESS_MAP</key>
+ <value><address-map><slave name='ctrl_amm_0' start='0x0' end='0x480000000' datawidth='576' /></address-map></value>
+ </entry>
+ <entry>
+ <key>ADDRESS_WIDTH</key>
+ <value>35</value>
+ </entry>
+ <entry>
+ <key>MAX_SLAVE_DATA_WIDTH</key>
+ <value>576</value>
+ </entry>
+ </consumedSystemInfos>
+ </value>
+ </entry>
+ <entry>
+ <key>ctrl_mmr_slave_0</key>
+ <value>
+ <connectionPointName>ctrl_mmr_slave_0</connectionPointName>
+ <suppliedSystemInfos/>
+ <consumedSystemInfos>
+ <entry>
+ <key>ADDRESS_MAP</key>
+ <value><address-map><slave name='ctrl_mmr_slave_0' start='0x0' end='0x1000' datawidth='32' /></address-map></value>
+ </entry>
+ <entry>
+ <key>ADDRESS_WIDTH</key>
+ <value>12</value>
+ </entry>
+ <entry>
+ <key>MAX_SLAVE_DATA_WIDTH</key>
+ <value>32</value>
+ </entry>
+ </consumedSystemInfos>
+ </value>
+ </entry>
+ <entry>
+ <key>emif_usr_clk</key>
+ <value>
+ <connectionPointName>emif_usr_clk</connectionPointName>
+ <suppliedSystemInfos/>
+ <consumedSystemInfos>
+ <entry>
+ <key>CLOCK_RATE</key>
+ <value>200000000</value>
+ </entry>
+ </consumedSystemInfos>
+ </value>
+ </entry>
+ </connPtSystemInfos>
+</systemInfosDefinition>]]></parameter>
+ <parameter name="systemScripts" value="" />
+ <parameter name="testBenchDutName" value="" />
+ <parameter name="timeStamp" value="0" />
+ <parameter name="useTestBenchNamingPattern" value="false" />
+ <instanceScript></instanceScript>
+ <interface name="cal_debug_out" internal="emif_0.cal_debug_out" />
+ <interface name="cal_debug_out_clk" internal="emif_0.cal_debug_out_clk" />
+ <interface name="cal_debug_out_reset_n" internal="emif_0.cal_debug_out_reset_n" />
+ <interface
+ name="ctrl_amm_0"
+ internal="emif_0.ctrl_amm_0"
+ type="avalon"
+ dir="end">
+ <port name="amm_address_0" internal="amm_address_0" />
+ <port name="amm_burstcount_0" internal="amm_burstcount_0" />
+ <port name="amm_byteenable_0" internal="amm_byteenable_0" />
+ <port name="amm_read_0" internal="amm_read_0" />
+ <port name="amm_readdata_0" internal="amm_readdata_0" />
+ <port name="amm_readdatavalid_0" internal="amm_readdatavalid_0" />
+ <port name="amm_ready_0" internal="amm_ready_0" />
+ <port name="amm_write_0" internal="amm_write_0" />
+ <port name="amm_writedata_0" internal="amm_writedata_0" />
+ </interface>
+ <interface
+ name="ctrl_mmr_slave_0"
+ internal="emif_0.ctrl_mmr_slave_0"
+ type="avalon"
+ dir="end">
+ <port name="mmr_slave_address_0" internal="mmr_slave_address_0" />
+ <port
+ name="mmr_slave_beginbursttransfer_0"
+ internal="mmr_slave_beginbursttransfer_0" />
+ <port name="mmr_slave_burstcount_0" internal="mmr_slave_burstcount_0" />
+ <port name="mmr_slave_read_0" internal="mmr_slave_read_0" />
+ <port name="mmr_slave_readdata_0" internal="mmr_slave_readdata_0" />
+ <port name="mmr_slave_readdatavalid_0" internal="mmr_slave_readdatavalid_0" />
+ <port name="mmr_slave_waitrequest_0" internal="mmr_slave_waitrequest_0" />
+ <port name="mmr_slave_write_0" internal="mmr_slave_write_0" />
+ <port name="mmr_slave_writedata_0" internal="mmr_slave_writedata_0" />
+ </interface>
+ <interface
+ name="emif_usr_clk"
+ internal="emif_0.emif_usr_clk"
+ type="clock"
+ dir="start">
+ <port name="emif_usr_clk" internal="emif_usr_clk" />
+ </interface>
+ <interface
+ name="emif_usr_reset_n"
+ internal="emif_0.emif_usr_reset_n"
+ type="reset"
+ dir="start">
+ <port name="emif_usr_reset_n" internal="emif_usr_reset_n" />
+ </interface>
+ <interface
+ name="global_reset_n"
+ internal="emif_0.global_reset_n"
+ type="reset"
+ dir="end">
+ <port name="global_reset_n" internal="global_reset_n" />
+ </interface>
+ <interface name="mem" internal="emif_0.mem" type="conduit" dir="end">
+ <port name="mem_a" internal="mem_a" />
+ <port name="mem_act_n" internal="mem_act_n" />
+ <port name="mem_alert_n" internal="mem_alert_n" />
+ <port name="mem_ba" internal="mem_ba" />
+ <port name="mem_bg" internal="mem_bg" />
+ <port name="mem_ck" internal="mem_ck" />
+ <port name="mem_ck_n" internal="mem_ck_n" />
+ <port name="mem_cke" internal="mem_cke" />
+ <port name="mem_cs_n" internal="mem_cs_n" />
+ <port name="mem_dbi_n" internal="mem_dbi_n" />
+ <port name="mem_dq" internal="mem_dq" />
+ <port name="mem_dqs" internal="mem_dqs" />
+ <port name="mem_dqs_n" internal="mem_dqs_n" />
+ <port name="mem_odt" internal="mem_odt" />
+ <port name="mem_par" internal="mem_par" />
+ <port name="mem_reset_n" internal="mem_reset_n" />
+ </interface>
+ <interface name="oct" internal="emif_0.oct" type="conduit" dir="end">
+ <port name="oct_rzqin" internal="oct_rzqin" />
+ </interface>
+ <interface
+ name="pll_ref_clk"
+ internal="emif_0.pll_ref_clk"
+ type="clock"
+ dir="end">
+ <port name="pll_ref_clk" internal="pll_ref_clk" />
+ </interface>
+ <interface name="status" internal="emif_0.status" type="conduit" dir="end">
+ <port name="local_cal_fail" internal="local_cal_fail" />
+ <port name="local_cal_success" internal="local_cal_success" />
+ </interface>
+ <module
+ name="emif_0"
+ kind="altera_emif"
+ version="18.0"
+ enabled="1"
+ autoexport="1">
+ <parameter name="BOARD_DDR3_AC_TO_CK_SKEW_NS" value="0.0" />
+ <parameter name="BOARD_DDR3_BRD_SKEW_WITHIN_AC_NS" value="0.02" />
+ <parameter name="BOARD_DDR3_BRD_SKEW_WITHIN_DQS_NS" value="0.02" />
+ <parameter name="BOARD_DDR3_DQS_TO_CK_SKEW_NS" value="0.02" />
+ <parameter name="BOARD_DDR3_IS_SKEW_WITHIN_AC_DESKEWED" value="true" />
+ <parameter name="BOARD_DDR3_IS_SKEW_WITHIN_DQS_DESKEWED" value="false" />
+ <parameter name="BOARD_DDR3_MAX_CK_DELAY_NS" value="0.6" />
+ <parameter name="BOARD_DDR3_MAX_DQS_DELAY_NS" value="0.6" />
+ <parameter name="BOARD_DDR3_PKG_BRD_SKEW_WITHIN_AC_NS" value="0.02" />
+ <parameter name="BOARD_DDR3_PKG_BRD_SKEW_WITHIN_DQS_NS" value="0.02" />
+ <parameter name="BOARD_DDR3_SKEW_BETWEEN_DIMMS_NS" value="0.05" />
+ <parameter name="BOARD_DDR3_SKEW_BETWEEN_DQS_NS" value="0.02" />
+ <parameter name="BOARD_DDR3_USER_AC_ISI_NS" value="0.0" />
+ <parameter name="BOARD_DDR3_USER_AC_SLEW_RATE" value="2.0" />
+ <parameter name="BOARD_DDR3_USER_CK_SLEW_RATE" value="4.0" />
+ <parameter name="BOARD_DDR3_USER_RCLK_ISI_NS" value="0.0" />
+ <parameter name="BOARD_DDR3_USER_RCLK_SLEW_RATE" value="5.0" />
+ <parameter name="BOARD_DDR3_USER_RDATA_ISI_NS" value="0.0" />
+ <parameter name="BOARD_DDR3_USER_RDATA_SLEW_RATE" value="2.5" />
+ <parameter name="BOARD_DDR3_USER_WCLK_ISI_NS" value="0.0" />
+ <parameter name="BOARD_DDR3_USER_WCLK_SLEW_RATE" value="4.0" />
+ <parameter name="BOARD_DDR3_USER_WDATA_ISI_NS" value="0.0" />
+ <parameter name="BOARD_DDR3_USER_WDATA_SLEW_RATE" value="2.0" />
+ <parameter name="BOARD_DDR3_USE_DEFAULT_ISI_VALUES" value="true" />
+ <parameter name="BOARD_DDR3_USE_DEFAULT_SLEW_RATES" value="true" />
+ <parameter name="BOARD_DDR4_AC_TO_CK_SKEW_NS" value="0.0" />
+ <parameter name="BOARD_DDR4_BRD_SKEW_WITHIN_AC_NS" value="0.02" />
+ <parameter name="BOARD_DDR4_BRD_SKEW_WITHIN_DQS_NS" value="0.02" />
+ <parameter name="BOARD_DDR4_DQS_TO_CK_SKEW_NS" value="0.02" />
+ <parameter name="BOARD_DDR4_IS_SKEW_WITHIN_AC_DESKEWED" value="false" />
+ <parameter name="BOARD_DDR4_IS_SKEW_WITHIN_DQS_DESKEWED" value="false" />
+ <parameter name="BOARD_DDR4_MAX_CK_DELAY_NS" value="0.6" />
+ <parameter name="BOARD_DDR4_MAX_DQS_DELAY_NS" value="0.6" />
+ <parameter name="BOARD_DDR4_PKG_BRD_SKEW_WITHIN_AC_NS" value="0.02" />
+ <parameter name="BOARD_DDR4_PKG_BRD_SKEW_WITHIN_DQS_NS" value="0.072" />
+ <parameter name="BOARD_DDR4_SKEW_BETWEEN_DIMMS_NS" value="0.05" />
+ <parameter name="BOARD_DDR4_SKEW_BETWEEN_DQS_NS" value="0.02" />
+ <parameter name="BOARD_DDR4_USER_AC_ISI_NS" value="0.0" />
+ <parameter name="BOARD_DDR4_USER_AC_SLEW_RATE" value="2.0" />
+ <parameter name="BOARD_DDR4_USER_CK_SLEW_RATE" value="4.0" />
+ <parameter name="BOARD_DDR4_USER_RCLK_ISI_NS" value="0.0" />
+ <parameter name="BOARD_DDR4_USER_RCLK_SLEW_RATE" value="8.0" />
+ <parameter name="BOARD_DDR4_USER_RDATA_ISI_NS" value="0.0" />
+ <parameter name="BOARD_DDR4_USER_RDATA_SLEW_RATE" value="4.0" />
+ <parameter name="BOARD_DDR4_USER_WCLK_ISI_NS" value="0.0" />
+ <parameter name="BOARD_DDR4_USER_WCLK_SLEW_RATE" value="4.0" />
+ <parameter name="BOARD_DDR4_USER_WDATA_ISI_NS" value="0.0" />
+ <parameter name="BOARD_DDR4_USER_WDATA_SLEW_RATE" value="2.0" />
+ <parameter name="BOARD_DDR4_USE_DEFAULT_ISI_VALUES" value="true" />
+ <parameter name="BOARD_DDR4_USE_DEFAULT_SLEW_RATES" value="false" />
+ <parameter name="BOARD_LPDDR3_AC_TO_CK_SKEW_NS" value="0.0" />
+ <parameter name="BOARD_LPDDR3_BRD_SKEW_WITHIN_AC_NS" value="0.02" />
+ <parameter name="BOARD_LPDDR3_BRD_SKEW_WITHIN_DQS_NS" value="0.02" />
+ <parameter name="BOARD_LPDDR3_DQS_TO_CK_SKEW_NS" value="0.02" />
+ <parameter name="BOARD_LPDDR3_IS_SKEW_WITHIN_AC_DESKEWED" value="true" />
+ <parameter name="BOARD_LPDDR3_IS_SKEW_WITHIN_DQS_DESKEWED" value="false" />
+ <parameter name="BOARD_LPDDR3_MAX_CK_DELAY_NS" value="0.6" />
+ <parameter name="BOARD_LPDDR3_MAX_DQS_DELAY_NS" value="0.6" />
+ <parameter name="BOARD_LPDDR3_PKG_BRD_SKEW_WITHIN_AC_NS" value="0.02" />
+ <parameter name="BOARD_LPDDR3_PKG_BRD_SKEW_WITHIN_DQS_NS" value="0.02" />
+ <parameter name="BOARD_LPDDR3_SKEW_BETWEEN_DIMMS_NS" value="0.05" />
+ <parameter name="BOARD_LPDDR3_SKEW_BETWEEN_DQS_NS" value="0.02" />
+ <parameter name="BOARD_LPDDR3_USER_AC_ISI_NS" value="0.0" />
+ <parameter name="BOARD_LPDDR3_USER_AC_SLEW_RATE" value="2.0" />
+ <parameter name="BOARD_LPDDR3_USER_CK_SLEW_RATE" value="4.0" />
+ <parameter name="BOARD_LPDDR3_USER_RCLK_ISI_NS" value="0.0" />
+ <parameter name="BOARD_LPDDR3_USER_RCLK_SLEW_RATE" value="4.0" />
+ <parameter name="BOARD_LPDDR3_USER_RDATA_ISI_NS" value="0.0" />
+ <parameter name="BOARD_LPDDR3_USER_RDATA_SLEW_RATE" value="2.0" />
+ <parameter name="BOARD_LPDDR3_USER_WCLK_ISI_NS" value="0.0" />
+ <parameter name="BOARD_LPDDR3_USER_WCLK_SLEW_RATE" value="4.0" />
+ <parameter name="BOARD_LPDDR3_USER_WDATA_ISI_NS" value="0.0" />
+ <parameter name="BOARD_LPDDR3_USER_WDATA_SLEW_RATE" value="2.0" />
+ <parameter name="BOARD_LPDDR3_USE_DEFAULT_ISI_VALUES" value="true" />
+ <parameter name="BOARD_LPDDR3_USE_DEFAULT_SLEW_RATES" value="true" />
+ <parameter name="BOARD_QDR2_AC_TO_K_SKEW_NS" value="0.0" />
+ <parameter name="BOARD_QDR2_BRD_SKEW_WITHIN_AC_NS" value="0.02" />
+ <parameter name="BOARD_QDR2_BRD_SKEW_WITHIN_D_NS" value="0.02" />
+ <parameter name="BOARD_QDR2_BRD_SKEW_WITHIN_Q_NS" value="0.02" />
+ <parameter name="BOARD_QDR2_IS_SKEW_WITHIN_AC_DESKEWED" value="true" />
+ <parameter name="BOARD_QDR2_IS_SKEW_WITHIN_D_DESKEWED" value="false" />
+ <parameter name="BOARD_QDR2_IS_SKEW_WITHIN_Q_DESKEWED" value="false" />
+ <parameter name="BOARD_QDR2_MAX_K_DELAY_NS" value="0.6" />
+ <parameter name="BOARD_QDR2_PKG_BRD_SKEW_WITHIN_AC_NS" value="0.02" />
+ <parameter name="BOARD_QDR2_PKG_BRD_SKEW_WITHIN_D_NS" value="0.02" />
+ <parameter name="BOARD_QDR2_PKG_BRD_SKEW_WITHIN_Q_NS" value="0.02" />
+ <parameter name="BOARD_QDR2_USER_AC_ISI_NS" value="0.0" />
+ <parameter name="BOARD_QDR2_USER_AC_SLEW_RATE" value="2.0" />
+ <parameter name="BOARD_QDR2_USER_K_SLEW_RATE" value="4.0" />
+ <parameter name="BOARD_QDR2_USER_RCLK_ISI_NS" value="0.0" />
+ <parameter name="BOARD_QDR2_USER_RCLK_SLEW_RATE" value="4.0" />
+ <parameter name="BOARD_QDR2_USER_RDATA_ISI_NS" value="0.0" />
+ <parameter name="BOARD_QDR2_USER_RDATA_SLEW_RATE" value="2.0" />
+ <parameter name="BOARD_QDR2_USER_WCLK_ISI_NS" value="0.0" />
+ <parameter name="BOARD_QDR2_USER_WDATA_ISI_NS" value="0.0" />
+ <parameter name="BOARD_QDR2_USER_WDATA_SLEW_RATE" value="2.0" />
+ <parameter name="BOARD_QDR2_USE_DEFAULT_ISI_VALUES" value="true" />
+ <parameter name="BOARD_QDR2_USE_DEFAULT_SLEW_RATES" value="true" />
+ <parameter name="BOARD_QDR4_AC_TO_CK_SKEW_NS" value="0.0" />
+ <parameter name="BOARD_QDR4_BRD_SKEW_WITHIN_AC_NS" value="0.02" />
+ <parameter name="BOARD_QDR4_BRD_SKEW_WITHIN_QK_NS" value="0.02" />
+ <parameter name="BOARD_QDR4_DK_TO_CK_SKEW_NS" value="-0.02" />
+ <parameter name="BOARD_QDR4_IS_SKEW_WITHIN_AC_DESKEWED" value="true" />
+ <parameter name="BOARD_QDR4_IS_SKEW_WITHIN_QK_DESKEWED" value="false" />
+ <parameter name="BOARD_QDR4_MAX_CK_DELAY_NS" value="0.6" />
+ <parameter name="BOARD_QDR4_MAX_DK_DELAY_NS" value="0.6" />
+ <parameter name="BOARD_QDR4_PKG_BRD_SKEW_WITHIN_AC_NS" value="0.02" />
+ <parameter name="BOARD_QDR4_PKG_BRD_SKEW_WITHIN_QK_NS" value="0.02" />
+ <parameter name="BOARD_QDR4_SKEW_BETWEEN_DIMMS_NS" value="0.05" />
+ <parameter name="BOARD_QDR4_SKEW_BETWEEN_DK_NS" value="0.02" />
+ <parameter name="BOARD_QDR4_USER_AC_ISI_NS" value="0.0" />
+ <parameter name="BOARD_QDR4_USER_AC_SLEW_RATE" value="2.0" />
+ <parameter name="BOARD_QDR4_USER_CK_SLEW_RATE" value="4.0" />
+ <parameter name="BOARD_QDR4_USER_RCLK_ISI_NS" value="0.0" />
+ <parameter name="BOARD_QDR4_USER_RCLK_SLEW_RATE" value="5.0" />
+ <parameter name="BOARD_QDR4_USER_RDATA_ISI_NS" value="0.0" />
+ <parameter name="BOARD_QDR4_USER_RDATA_SLEW_RATE" value="2.5" />
+ <parameter name="BOARD_QDR4_USER_WCLK_ISI_NS" value="0.0" />
+ <parameter name="BOARD_QDR4_USER_WCLK_SLEW_RATE" value="4.0" />
+ <parameter name="BOARD_QDR4_USER_WDATA_ISI_NS" value="0.0" />
+ <parameter name="BOARD_QDR4_USER_WDATA_SLEW_RATE" value="2.0" />
+ <parameter name="BOARD_QDR4_USE_DEFAULT_ISI_VALUES" value="true" />
+ <parameter name="BOARD_QDR4_USE_DEFAULT_SLEW_RATES" value="true" />
+ <parameter name="BOARD_RLD3_AC_TO_CK_SKEW_NS" value="0.0" />
+ <parameter name="BOARD_RLD3_BRD_SKEW_WITHIN_AC_NS" value="0.02" />
+ <parameter name="BOARD_RLD3_BRD_SKEW_WITHIN_QK_NS" value="0.02" />
+ <parameter name="BOARD_RLD3_DK_TO_CK_SKEW_NS" value="-0.02" />
+ <parameter name="BOARD_RLD3_IS_SKEW_WITHIN_AC_DESKEWED" value="true" />
+ <parameter name="BOARD_RLD3_IS_SKEW_WITHIN_QK_DESKEWED" value="false" />
+ <parameter name="BOARD_RLD3_MAX_CK_DELAY_NS" value="0.6" />
+ <parameter name="BOARD_RLD3_MAX_DK_DELAY_NS" value="0.6" />
+ <parameter name="BOARD_RLD3_PKG_BRD_SKEW_WITHIN_AC_NS" value="0.02" />
+ <parameter name="BOARD_RLD3_PKG_BRD_SKEW_WITHIN_QK_NS" value="0.02" />
+ <parameter name="BOARD_RLD3_SKEW_BETWEEN_DIMMS_NS" value="0.05" />
+ <parameter name="BOARD_RLD3_SKEW_BETWEEN_DK_NS" value="0.02" />
+ <parameter name="BOARD_RLD3_USER_AC_ISI_NS" value="0.0" />
+ <parameter name="BOARD_RLD3_USER_AC_SLEW_RATE" value="2.0" />
+ <parameter name="BOARD_RLD3_USER_CK_SLEW_RATE" value="4.0" />
+ <parameter name="BOARD_RLD3_USER_RCLK_ISI_NS" value="0.0" />
+ <parameter name="BOARD_RLD3_USER_RCLK_SLEW_RATE" value="7.0" />
+ <parameter name="BOARD_RLD3_USER_RDATA_ISI_NS" value="0.0" />
+ <parameter name="BOARD_RLD3_USER_RDATA_SLEW_RATE" value="3.5" />
+ <parameter name="BOARD_RLD3_USER_WCLK_ISI_NS" value="0.0" />
+ <parameter name="BOARD_RLD3_USER_WCLK_SLEW_RATE" value="4.0" />
+ <parameter name="BOARD_RLD3_USER_WDATA_ISI_NS" value="0.0" />
+ <parameter name="BOARD_RLD3_USER_WDATA_SLEW_RATE" value="2.0" />
+ <parameter name="BOARD_RLD3_USE_DEFAULT_ISI_VALUES" value="true" />
+ <parameter name="BOARD_RLD3_USE_DEFAULT_SLEW_RATES" value="true" />
+ <parameter name="CAL_DEBUG_CLOCK_FREQUENCY" value="50000000" />
+ <parameter name="CTRL_DDR3_ADDR_ORDER_ENUM">DDR3_CTRL_ADDR_ORDER_CS_R_B_C</parameter>
+ <parameter name="CTRL_DDR3_AUTO_POWER_DOWN_CYCS" value="32" />
+ <parameter name="CTRL_DDR3_AUTO_POWER_DOWN_EN" value="false" />
+ <parameter name="CTRL_DDR3_AUTO_PRECHARGE_EN" value="false" />
+ <parameter name="CTRL_DDR3_AVL_PROTOCOL_ENUM">CTRL_AVL_PROTOCOL_MM</parameter>
+ <parameter name="CTRL_DDR3_ECC_AUTO_CORRECTION_EN" value="false" />
+ <parameter name="CTRL_DDR3_ECC_EN" value="false" />
+ <parameter name="CTRL_DDR3_MMR_EN" value="false" />
+ <parameter name="CTRL_DDR3_RD_TO_RD_DIFF_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_DDR3_RD_TO_WR_DIFF_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_DDR3_RD_TO_WR_SAME_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_DDR3_REORDER_EN" value="true" />
+ <parameter name="CTRL_DDR3_SELF_REFRESH_EN" value="false" />
+ <parameter name="CTRL_DDR3_STARVE_LIMIT" value="10" />
+ <parameter name="CTRL_DDR3_USER_PRIORITY_EN" value="false" />
+ <parameter name="CTRL_DDR3_USER_REFRESH_EN" value="false" />
+ <parameter name="CTRL_DDR3_WR_TO_RD_DIFF_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_DDR3_WR_TO_RD_SAME_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_DDR3_WR_TO_WR_DIFF_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_DDR4_ADDR_ORDER_ENUM">DDR4_CTRL_ADDR_ORDER_CS_R_B_C_BG</parameter>
+ <parameter name="CTRL_DDR4_AUTO_POWER_DOWN_CYCS" value="32" />
+ <parameter name="CTRL_DDR4_AUTO_POWER_DOWN_EN" value="false" />
+ <parameter name="CTRL_DDR4_AUTO_PRECHARGE_EN" value="false" />
+ <parameter name="CTRL_DDR4_AVL_PROTOCOL_ENUM">CTRL_AVL_PROTOCOL_MM</parameter>
+ <parameter name="CTRL_DDR4_ECC_AUTO_CORRECTION_EN" value="false" />
+ <parameter name="CTRL_DDR4_ECC_EN" value="false" />
+ <parameter name="CTRL_DDR4_MMR_EN" value="true" />
+ <parameter name="CTRL_DDR4_RD_TO_RD_DIFF_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_DDR4_RD_TO_WR_DIFF_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_DDR4_RD_TO_WR_SAME_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_DDR4_REORDER_EN" value="true" />
+ <parameter name="CTRL_DDR4_SELF_REFRESH_EN" value="false" />
+ <parameter name="CTRL_DDR4_STARVE_LIMIT" value="10" />
+ <parameter name="CTRL_DDR4_USER_PRIORITY_EN" value="false" />
+ <parameter name="CTRL_DDR4_USER_REFRESH_EN" value="false" />
+ <parameter name="CTRL_DDR4_WR_TO_RD_DIFF_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_DDR4_WR_TO_RD_SAME_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_DDR4_WR_TO_WR_DIFF_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_LPDDR3_ADDR_ORDER_ENUM">LPDDR3_CTRL_ADDR_ORDER_CS_R_B_C</parameter>
+ <parameter name="CTRL_LPDDR3_AUTO_POWER_DOWN_CYCS" value="32" />
+ <parameter name="CTRL_LPDDR3_AUTO_POWER_DOWN_EN" value="false" />
+ <parameter name="CTRL_LPDDR3_AUTO_PRECHARGE_EN" value="false" />
+ <parameter name="CTRL_LPDDR3_AVL_PROTOCOL_ENUM">CTRL_AVL_PROTOCOL_MM</parameter>
+ <parameter name="CTRL_LPDDR3_MMR_EN" value="false" />
+ <parameter name="CTRL_LPDDR3_RD_TO_RD_DIFF_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_LPDDR3_RD_TO_WR_DIFF_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_LPDDR3_RD_TO_WR_SAME_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_LPDDR3_REORDER_EN" value="true" />
+ <parameter name="CTRL_LPDDR3_SELF_REFRESH_EN" value="false" />
+ <parameter name="CTRL_LPDDR3_STARVE_LIMIT" value="10" />
+ <parameter name="CTRL_LPDDR3_USER_PRIORITY_EN" value="false" />
+ <parameter name="CTRL_LPDDR3_USER_REFRESH_EN" value="false" />
+ <parameter name="CTRL_LPDDR3_WR_TO_RD_DIFF_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_LPDDR3_WR_TO_RD_SAME_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_LPDDR3_WR_TO_WR_DIFF_CHIP_DELTA_CYCS" value="0" />
+ <parameter name="CTRL_QDR2_AVL_ENABLE_POWER_OF_TWO_BUS" value="false" />
+ <parameter name="CTRL_QDR2_AVL_MAX_BURST_COUNT" value="4" />
+ <parameter name="CTRL_QDR2_AVL_PROTOCOL_ENUM">CTRL_AVL_PROTOCOL_MM</parameter>
+ <parameter name="CTRL_QDR4_ADD_RAW_TURNAROUND_DELAY_CYC" value="0" />
+ <parameter name="CTRL_QDR4_ADD_WAR_TURNAROUND_DELAY_CYC" value="0" />
+ <parameter name="CTRL_QDR4_AVL_ENABLE_POWER_OF_TWO_BUS" value="false" />
+ <parameter name="CTRL_QDR4_AVL_MAX_BURST_COUNT" value="4" />
+ <parameter name="CTRL_QDR4_AVL_PROTOCOL_ENUM">CTRL_AVL_PROTOCOL_MM</parameter>
+ <parameter name="CTRL_QDR4_DEF_RAW_TURNAROUND_DELAY_CYC" value="4" />
+ <parameter name="CTRL_RLD2_AVL_PROTOCOL_ENUM">CTRL_AVL_PROTOCOL_MM</parameter>
+ <parameter name="CTRL_RLD3_ADDR_ORDER_ENUM">RLD3_CTRL_ADDR_ORDER_CS_R_B_C</parameter>
+ <parameter name="CTRL_RLD3_AVL_PROTOCOL_ENUM">CTRL_AVL_PROTOCOL_MM</parameter>
+ <parameter name="DIAG_BOARD_DELAY_CONFIG_STR" value="" />
+ <parameter name="DIAG_DB_RESET_AUTO_RELEASE" value="avl_release" />
+ <parameter name="DIAG_DDR3_ABSTRACT_PHY" value="false" />
+ <parameter name="DIAG_DDR3_BYPASS_DEFAULT_PATTERN" value="false" />
+ <parameter name="DIAG_DDR3_BYPASS_REPEAT_STAGE" value="true" />
+ <parameter name="DIAG_DDR3_BYPASS_STRESS_STAGE" value="true" />
+ <parameter name="DIAG_DDR3_BYPASS_USER_STAGE" value="true" />
+ <parameter name="DIAG_DDR3_CAL_ADDR0" value="0" />
+ <parameter name="DIAG_DDR3_CAL_ADDR1" value="8" />
+ <parameter name="DIAG_DDR3_CAL_ENABLE_MICRON_AP" value="false" />
+ <parameter name="DIAG_DDR3_CAL_ENABLE_NON_DES" value="false" />
+ <parameter name="DIAG_DDR3_CAL_FULL_CAL_ON_RESET" value="true" />
+ <parameter name="DIAG_DDR3_CA_DESKEW_EN" value="false" />
+ <parameter name="DIAG_DDR3_CA_LEVEL_EN" value="false" />
+ <parameter name="DIAG_DDR3_EFFICIENCY_MONITOR">EFFMON_MODE_DISABLED</parameter>
+ <parameter name="DIAG_DDR3_EXPORT_SEQ_AVALON_HEAD_OF_CHAIN" value="true" />
+ <parameter name="DIAG_DDR3_EXPORT_SEQ_AVALON_MASTER" value="false" />
+ <parameter name="DIAG_DDR3_EXPORT_SEQ_AVALON_SLAVE">CAL_DEBUG_EXPORT_MODE_DISABLED</parameter>
+ <parameter name="DIAG_DDR3_EX_DESIGN_ISSP_EN" value="true" />
+ <parameter name="DIAG_DDR3_EX_DESIGN_NUM_OF_SLAVES" value="1" />
+ <parameter name="DIAG_DDR3_EX_DESIGN_SEPARATE_RZQS" value="false" />
+ <parameter name="DIAG_DDR3_INFI_TG2_ERR_TEST" value="false" />
+ <parameter name="DIAG_DDR3_INTERFACE_ID" value="0" />
+ <parameter name="DIAG_DDR3_SEPARATE_READ_WRITE_ITFS" value="false" />
+ <parameter name="DIAG_DDR3_SIM_CAL_MODE_ENUM" value="SIM_CAL_MODE_SKIP" />
+ <parameter name="DIAG_DDR3_SIM_VERBOSE" value="true" />
+ <parameter name="DIAG_DDR3_TG_BE_PATTERN_LENGTH" value="8" />
+ <parameter name="DIAG_DDR3_TG_DATA_PATTERN_LENGTH" value="8" />
+ <parameter name="DIAG_DDR3_USE_TG_AVL_2" value="false" />
+ <parameter name="DIAG_DDR4_ABSTRACT_PHY" value="false" />
+ <parameter name="DIAG_DDR4_BYPASS_DEFAULT_PATTERN" value="false" />
+ <parameter name="DIAG_DDR4_BYPASS_REPEAT_STAGE" value="true" />
+ <parameter name="DIAG_DDR4_BYPASS_STRESS_STAGE" value="true" />
+ <parameter name="DIAG_DDR4_BYPASS_USER_STAGE" value="true" />
+ <parameter name="DIAG_DDR4_CAL_ADDR0" value="0" />
+ <parameter name="DIAG_DDR4_CAL_ADDR1" value="8" />
+ <parameter name="DIAG_DDR4_CAL_ENABLE_NON_DES" value="false" />
+ <parameter name="DIAG_DDR4_CAL_FULL_CAL_ON_RESET" value="true" />
+ <parameter name="DIAG_DDR4_EFFICIENCY_MONITOR">EFFMON_MODE_DISABLED</parameter>
+ <parameter name="DIAG_DDR4_EXPORT_SEQ_AVALON_HEAD_OF_CHAIN" value="true" />
+ <parameter name="DIAG_DDR4_EXPORT_SEQ_AVALON_MASTER" value="false" />
+ <parameter name="DIAG_DDR4_EXPORT_SEQ_AVALON_SLAVE">CAL_DEBUG_EXPORT_MODE_JTAG</parameter>
+ <parameter name="DIAG_DDR4_EX_DESIGN_ISSP_EN" value="true" />
+ <parameter name="DIAG_DDR4_EX_DESIGN_NUM_OF_SLAVES" value="1" />
+ <parameter name="DIAG_DDR4_EX_DESIGN_SEPARATE_RZQS" value="false" />
+ <parameter name="DIAG_DDR4_INFI_TG2_ERR_TEST" value="false" />
+ <parameter name="DIAG_DDR4_INTERFACE_ID" value="0" />
+ <parameter name="DIAG_DDR4_SEPARATE_READ_WRITE_ITFS" value="false" />
+ <parameter name="DIAG_DDR4_SIM_CAL_MODE_ENUM" value="SIM_CAL_MODE_SKIP" />
+ <parameter name="DIAG_DDR4_SIM_VERBOSE" value="true" />
+ <parameter name="DIAG_DDR4_SKIP_CA_DESKEW" value="false" />
+ <parameter name="DIAG_DDR4_SKIP_CA_LEVEL" value="false" />
+ <parameter name="DIAG_DDR4_SKIP_VREF_CAL" value="false" />
+ <parameter name="DIAG_DDR4_TG_BE_PATTERN_LENGTH" value="8" />
+ <parameter name="DIAG_DDR4_TG_DATA_PATTERN_LENGTH" value="8" />
+ <parameter name="DIAG_DDR4_USE_TG_AVL_2" value="false" />
+ <parameter name="DIAG_ECLIPSE_DEBUG" value="false" />
+ <parameter name="DIAG_ENABLE_HPS_EMIF_DEBUG" value="false" />
+ <parameter name="DIAG_ENABLE_JTAG_UART" value="false" />
+ <parameter name="DIAG_ENABLE_JTAG_UART_HEX" value="false" />
+ <parameter name="DIAG_EXPORT_PLL_LOCKED" value="false" />
+ <parameter name="DIAG_EXPORT_PLL_REF_CLK_OUT" value="false" />
+ <parameter name="DIAG_EXPORT_VJI" value="false" />
+ <parameter name="DIAG_EXPOSE_DFT_SIGNALS" value="false" />
+ <parameter name="DIAG_EXTRA_CONFIGS" value="" />
+ <parameter name="DIAG_EXT_DOCS" value="false" />
+ <parameter name="DIAG_EX_DESIGN_ADD_TEST_EMIFS" value="" />
+ <parameter name="DIAG_EX_DESIGN_SEPARATE_RESETS" value="false" />
+ <parameter name="DIAG_FAST_SIM_OVERRIDE">FAST_SIM_OVERRIDE_DEFAULT</parameter>
+ <parameter name="DIAG_HMC_HRC" value="auto" />
+ <parameter name="DIAG_LPDDR3_ABSTRACT_PHY" value="false" />
+ <parameter name="DIAG_LPDDR3_BYPASS_DEFAULT_PATTERN" value="false" />
+ <parameter name="DIAG_LPDDR3_BYPASS_REPEAT_STAGE" value="true" />
+ <parameter name="DIAG_LPDDR3_BYPASS_STRESS_STAGE" value="true" />
+ <parameter name="DIAG_LPDDR3_BYPASS_USER_STAGE" value="true" />
+ <parameter name="DIAG_LPDDR3_EFFICIENCY_MONITOR">EFFMON_MODE_DISABLED</parameter>
+ <parameter name="DIAG_LPDDR3_EXPORT_SEQ_AVALON_HEAD_OF_CHAIN" value="true" />
+ <parameter name="DIAG_LPDDR3_EXPORT_SEQ_AVALON_MASTER" value="false" />
+ <parameter name="DIAG_LPDDR3_EXPORT_SEQ_AVALON_SLAVE">CAL_DEBUG_EXPORT_MODE_DISABLED</parameter>
+ <parameter name="DIAG_LPDDR3_EX_DESIGN_ISSP_EN" value="true" />
+ <parameter name="DIAG_LPDDR3_EX_DESIGN_NUM_OF_SLAVES" value="1" />
+ <parameter name="DIAG_LPDDR3_EX_DESIGN_SEPARATE_RZQS" value="false" />
+ <parameter name="DIAG_LPDDR3_INFI_TG2_ERR_TEST" value="false" />
+ <parameter name="DIAG_LPDDR3_INTERFACE_ID" value="0" />
+ <parameter name="DIAG_LPDDR3_SEPARATE_READ_WRITE_ITFS" value="false" />
+ <parameter name="DIAG_LPDDR3_SIM_CAL_MODE_ENUM" value="SIM_CAL_MODE_SKIP" />
+ <parameter name="DIAG_LPDDR3_SIM_VERBOSE" value="true" />
+ <parameter name="DIAG_LPDDR3_SKIP_CA_DESKEW" value="false" />
+ <parameter name="DIAG_LPDDR3_SKIP_CA_LEVEL" value="false" />
+ <parameter name="DIAG_LPDDR3_TG_BE_PATTERN_LENGTH" value="8" />
+ <parameter name="DIAG_LPDDR3_TG_DATA_PATTERN_LENGTH" value="8" />
+ <parameter name="DIAG_LPDDR3_USE_TG_AVL_2" value="false" />
+ <parameter name="DIAG_QDR2_ABSTRACT_PHY" value="false" />
+ <parameter name="DIAG_QDR2_BYPASS_DEFAULT_PATTERN" value="false" />
+ <parameter name="DIAG_QDR2_BYPASS_REPEAT_STAGE" value="true" />
+ <parameter name="DIAG_QDR2_BYPASS_STRESS_STAGE" value="true" />
+ <parameter name="DIAG_QDR2_BYPASS_USER_STAGE" value="true" />
+ <parameter name="DIAG_QDR2_EFFICIENCY_MONITOR">EFFMON_MODE_DISABLED</parameter>
+ <parameter name="DIAG_QDR2_EXPORT_SEQ_AVALON_HEAD_OF_CHAIN" value="true" />
+ <parameter name="DIAG_QDR2_EXPORT_SEQ_AVALON_MASTER" value="false" />
+ <parameter name="DIAG_QDR2_EXPORT_SEQ_AVALON_SLAVE">CAL_DEBUG_EXPORT_MODE_DISABLED</parameter>
+ <parameter name="DIAG_QDR2_EX_DESIGN_ISSP_EN" value="true" />
+ <parameter name="DIAG_QDR2_EX_DESIGN_NUM_OF_SLAVES" value="1" />
+ <parameter name="DIAG_QDR2_EX_DESIGN_SEPARATE_RZQS" value="false" />
+ <parameter name="DIAG_QDR2_INFI_TG2_ERR_TEST" value="false" />
+ <parameter name="DIAG_QDR2_INTERFACE_ID" value="0" />
+ <parameter name="DIAG_QDR2_SEPARATE_READ_WRITE_ITFS" value="false" />
+ <parameter name="DIAG_QDR2_SIM_CAL_MODE_ENUM" value="SIM_CAL_MODE_SKIP" />
+ <parameter name="DIAG_QDR2_SIM_VERBOSE" value="true" />
+ <parameter name="DIAG_QDR2_TG_BE_PATTERN_LENGTH" value="8" />
+ <parameter name="DIAG_QDR2_TG_DATA_PATTERN_LENGTH" value="8" />
+ <parameter name="DIAG_QDR2_USE_TG_AVL_2" value="false" />
+ <parameter name="DIAG_QDR4_ABSTRACT_PHY" value="false" />
+ <parameter name="DIAG_QDR4_BYPASS_DEFAULT_PATTERN" value="false" />
+ <parameter name="DIAG_QDR4_BYPASS_REPEAT_STAGE" value="true" />
+ <parameter name="DIAG_QDR4_BYPASS_STRESS_STAGE" value="true" />
+ <parameter name="DIAG_QDR4_BYPASS_USER_STAGE" value="true" />
+ <parameter name="DIAG_QDR4_EFFICIENCY_MONITOR">EFFMON_MODE_DISABLED</parameter>
+ <parameter name="DIAG_QDR4_EXPORT_SEQ_AVALON_HEAD_OF_CHAIN" value="true" />
+ <parameter name="DIAG_QDR4_EXPORT_SEQ_AVALON_MASTER" value="false" />
+ <parameter name="DIAG_QDR4_EXPORT_SEQ_AVALON_SLAVE">CAL_DEBUG_EXPORT_MODE_DISABLED</parameter>
+ <parameter name="DIAG_QDR4_EX_DESIGN_ISSP_EN" value="true" />
+ <parameter name="DIAG_QDR4_EX_DESIGN_NUM_OF_SLAVES" value="1" />
+ <parameter name="DIAG_QDR4_EX_DESIGN_SEPARATE_RZQS" value="false" />
+ <parameter name="DIAG_QDR4_INFI_TG2_ERR_TEST" value="false" />
+ <parameter name="DIAG_QDR4_INTERFACE_ID" value="0" />
+ <parameter name="DIAG_QDR4_SEPARATE_READ_WRITE_ITFS" value="false" />
+ <parameter name="DIAG_QDR4_SIM_CAL_MODE_ENUM" value="SIM_CAL_MODE_SKIP" />
+ <parameter name="DIAG_QDR4_SIM_VERBOSE" value="true" />
+ <parameter name="DIAG_QDR4_SKIP_VREF_CAL" value="false" />
+ <parameter name="DIAG_QDR4_TG_BE_PATTERN_LENGTH" value="8" />
+ <parameter name="DIAG_QDR4_TG_DATA_PATTERN_LENGTH" value="8" />
+ <parameter name="DIAG_QDR4_USE_TG_AVL_2" value="false" />
+ <parameter name="DIAG_RLD2_ABSTRACT_PHY" value="false" />
+ <parameter name="DIAG_RLD2_BYPASS_DEFAULT_PATTERN" value="false" />
+ <parameter name="DIAG_RLD2_BYPASS_REPEAT_STAGE" value="true" />
+ <parameter name="DIAG_RLD2_BYPASS_STRESS_STAGE" value="true" />
+ <parameter name="DIAG_RLD2_BYPASS_USER_STAGE" value="true" />
+ <parameter name="DIAG_RLD2_EFFICIENCY_MONITOR">EFFMON_MODE_DISABLED</parameter>
+ <parameter name="DIAG_RLD2_EXPORT_SEQ_AVALON_HEAD_OF_CHAIN" value="true" />
+ <parameter name="DIAG_RLD2_EXPORT_SEQ_AVALON_MASTER" value="false" />
+ <parameter name="DIAG_RLD2_EXPORT_SEQ_AVALON_SLAVE">CAL_DEBUG_EXPORT_MODE_DISABLED</parameter>
+ <parameter name="DIAG_RLD2_EX_DESIGN_ISSP_EN" value="true" />
+ <parameter name="DIAG_RLD2_EX_DESIGN_NUM_OF_SLAVES" value="1" />
+ <parameter name="DIAG_RLD2_EX_DESIGN_SEPARATE_RZQS" value="false" />
+ <parameter name="DIAG_RLD2_INFI_TG2_ERR_TEST" value="false" />
+ <parameter name="DIAG_RLD2_INTERFACE_ID" value="0" />
+ <parameter name="DIAG_RLD2_SEPARATE_READ_WRITE_ITFS" value="false" />
+ <parameter name="DIAG_RLD2_SIM_CAL_MODE_ENUM" value="SIM_CAL_MODE_SKIP" />
+ <parameter name="DIAG_RLD2_SIM_VERBOSE" value="true" />
+ <parameter name="DIAG_RLD2_TG_BE_PATTERN_LENGTH" value="8" />
+ <parameter name="DIAG_RLD2_TG_DATA_PATTERN_LENGTH" value="8" />
+ <parameter name="DIAG_RLD2_USE_TG_AVL_2" value="false" />
+ <parameter name="DIAG_RLD3_ABSTRACT_PHY" value="false" />
+ <parameter name="DIAG_RLD3_BYPASS_DEFAULT_PATTERN" value="false" />
+ <parameter name="DIAG_RLD3_BYPASS_REPEAT_STAGE" value="true" />
+ <parameter name="DIAG_RLD3_BYPASS_STRESS_STAGE" value="true" />
+ <parameter name="DIAG_RLD3_BYPASS_USER_STAGE" value="true" />
+ <parameter name="DIAG_RLD3_CA_DESKEW_EN" value="false" />
+ <parameter name="DIAG_RLD3_CA_LEVEL_EN" value="false" />
+ <parameter name="DIAG_RLD3_EFFICIENCY_MONITOR">EFFMON_MODE_DISABLED</parameter>
+ <parameter name="DIAG_RLD3_EXPORT_SEQ_AVALON_HEAD_OF_CHAIN" value="true" />
+ <parameter name="DIAG_RLD3_EXPORT_SEQ_AVALON_MASTER" value="false" />
+ <parameter name="DIAG_RLD3_EXPORT_SEQ_AVALON_SLAVE">CAL_DEBUG_EXPORT_MODE_DISABLED</parameter>
+ <parameter name="DIAG_RLD3_EX_DESIGN_ISSP_EN" value="true" />
+ <parameter name="DIAG_RLD3_EX_DESIGN_NUM_OF_SLAVES" value="1" />
+ <parameter name="DIAG_RLD3_EX_DESIGN_SEPARATE_RZQS" value="false" />
+ <parameter name="DIAG_RLD3_INFI_TG2_ERR_TEST" value="false" />
+ <parameter name="DIAG_RLD3_INTERFACE_ID" value="0" />
+ <parameter name="DIAG_RLD3_SEPARATE_READ_WRITE_ITFS" value="false" />
+ <parameter name="DIAG_RLD3_SIM_CAL_MODE_ENUM" value="SIM_CAL_MODE_SKIP" />
+ <parameter name="DIAG_RLD3_SIM_VERBOSE" value="true" />
+ <parameter name="DIAG_RLD3_TG_BE_PATTERN_LENGTH" value="8" />
+ <parameter name="DIAG_RLD3_TG_DATA_PATTERN_LENGTH" value="8" />
+ <parameter name="DIAG_RLD3_USE_TG_AVL_2" value="false" />
+ <parameter name="DIAG_RS232_UART_BAUDRATE" value="57600" />
+ <parameter name="DIAG_SEQ_RESET_AUTO_RELEASE" value="avl" />
+ <parameter name="DIAG_SIM_REGTEST_MODE" value="false" />
+ <parameter name="DIAG_SOFT_NIOS_CLOCK_FREQUENCY" value="100" />
+ <parameter name="DIAG_SOFT_NIOS_MODE">SOFT_NIOS_MODE_DISABLED</parameter>
+ <parameter name="DIAG_SYNTH_FOR_SIM" value="false" />
+ <parameter name="DIAG_TG_AVL_2_EXPORT_CFG_INTERFACE" value="false" />
+ <parameter name="DIAG_TG_AVL_2_NUM_CFG_INTERFACES" value="0" />
+ <parameter name="DIAG_TIMING_REGTEST_MODE" value="false" />
+ <parameter name="DIAG_USE_BOARD_DELAY_MODEL" value="false" />
+ <parameter name="DIAG_USE_RS232_UART" value="false" />
+ <parameter name="DIAG_VERBOSE_IOAUX" value="false" />
+ <parameter name="EX_DESIGN_GUI_DDR3_GEN_SIM" value="true" />
+ <parameter name="EX_DESIGN_GUI_DDR3_GEN_SYNTH" value="true" />
+ <parameter name="EX_DESIGN_GUI_DDR3_HDL_FORMAT" value="HDL_FORMAT_VERILOG" />
+ <parameter name="EX_DESIGN_GUI_DDR3_PREV_PRESET" value="TARGET_DEV_KIT_NONE" />
+ <parameter name="EX_DESIGN_GUI_DDR3_SEL_DESIGN">AVAIL_EX_DESIGNS_GEN_DESIGN</parameter>
+ <parameter name="EX_DESIGN_GUI_DDR3_TARGET_DEV_KIT" value="TARGET_DEV_KIT_NONE" />
+ <parameter name="EX_DESIGN_GUI_DDR4_GEN_SIM" value="true" />
+ <parameter name="EX_DESIGN_GUI_DDR4_GEN_SYNTH" value="true" />
+ <parameter name="EX_DESIGN_GUI_DDR4_HDL_FORMAT" value="HDL_FORMAT_VERILOG" />
+ <parameter name="EX_DESIGN_GUI_DDR4_PREV_PRESET" value="TARGET_DEV_KIT_NONE" />
+ <parameter name="EX_DESIGN_GUI_DDR4_SEL_DESIGN">AVAIL_EX_DESIGNS_GEN_DESIGN</parameter>
+ <parameter name="EX_DESIGN_GUI_DDR4_TARGET_DEV_KIT" value="TARGET_DEV_KIT_NONE" />
+ <parameter name="EX_DESIGN_GUI_LPDDR3_GEN_SIM" value="true" />
+ <parameter name="EX_DESIGN_GUI_LPDDR3_GEN_SYNTH" value="true" />
+ <parameter name="EX_DESIGN_GUI_LPDDR3_HDL_FORMAT" value="HDL_FORMAT_VERILOG" />
+ <parameter name="EX_DESIGN_GUI_LPDDR3_PREV_PRESET" value="TARGET_DEV_KIT_NONE" />
+ <parameter name="EX_DESIGN_GUI_LPDDR3_SEL_DESIGN">AVAIL_EX_DESIGNS_GEN_DESIGN</parameter>
+ <parameter
+ name="EX_DESIGN_GUI_LPDDR3_TARGET_DEV_KIT"
+ value="TARGET_DEV_KIT_NONE" />
+ <parameter name="EX_DESIGN_GUI_QDR2_GEN_SIM" value="true" />
+ <parameter name="EX_DESIGN_GUI_QDR2_GEN_SYNTH" value="true" />
+ <parameter name="EX_DESIGN_GUI_QDR2_HDL_FORMAT" value="HDL_FORMAT_VERILOG" />
+ <parameter name="EX_DESIGN_GUI_QDR2_PREV_PRESET" value="TARGET_DEV_KIT_NONE" />
+ <parameter name="EX_DESIGN_GUI_QDR2_SEL_DESIGN">AVAIL_EX_DESIGNS_GEN_DESIGN</parameter>
+ <parameter name="EX_DESIGN_GUI_QDR2_TARGET_DEV_KIT" value="TARGET_DEV_KIT_NONE" />
+ <parameter name="EX_DESIGN_GUI_QDR4_GEN_SIM" value="true" />
+ <parameter name="EX_DESIGN_GUI_QDR4_GEN_SYNTH" value="true" />
+ <parameter name="EX_DESIGN_GUI_QDR4_HDL_FORMAT" value="HDL_FORMAT_VERILOG" />
+ <parameter name="EX_DESIGN_GUI_QDR4_PREV_PRESET" value="TARGET_DEV_KIT_NONE" />
+ <parameter name="EX_DESIGN_GUI_QDR4_SEL_DESIGN">AVAIL_EX_DESIGNS_GEN_DESIGN</parameter>
+ <parameter name="EX_DESIGN_GUI_QDR4_TARGET_DEV_KIT" value="TARGET_DEV_KIT_NONE" />
+ <parameter name="EX_DESIGN_GUI_RLD2_GEN_SIM" value="true" />
+ <parameter name="EX_DESIGN_GUI_RLD2_GEN_SYNTH" value="true" />
+ <parameter name="EX_DESIGN_GUI_RLD2_HDL_FORMAT" value="HDL_FORMAT_VERILOG" />
+ <parameter name="EX_DESIGN_GUI_RLD2_PREV_PRESET" value="TARGET_DEV_KIT_NONE" />
+ <parameter name="EX_DESIGN_GUI_RLD2_SEL_DESIGN">AVAIL_EX_DESIGNS_GEN_DESIGN</parameter>
+ <parameter name="EX_DESIGN_GUI_RLD2_TARGET_DEV_KIT" value="TARGET_DEV_KIT_NONE" />
+ <parameter name="EX_DESIGN_GUI_RLD3_GEN_SIM" value="true" />
+ <parameter name="EX_DESIGN_GUI_RLD3_GEN_SYNTH" value="true" />
+ <parameter name="EX_DESIGN_GUI_RLD3_HDL_FORMAT" value="HDL_FORMAT_VERILOG" />
+ <parameter name="EX_DESIGN_GUI_RLD3_PREV_PRESET" value="TARGET_DEV_KIT_NONE" />
+ <parameter name="EX_DESIGN_GUI_RLD3_SEL_DESIGN">AVAIL_EX_DESIGNS_GEN_DESIGN</parameter>
+ <parameter name="EX_DESIGN_GUI_RLD3_TARGET_DEV_KIT" value="TARGET_DEV_KIT_NONE" />
+ <parameter name="INTERNAL_TESTING_MODE" value="false" />
+ <parameter name="IS_ED_SLAVE" value="false" />
+ <parameter name="MEM_DDR3_ALERT_N_DQS_GROUP" value="0" />
+ <parameter name="MEM_DDR3_ALERT_N_PLACEMENT_ENUM">DDR3_ALERT_N_PLACEMENT_AC_LANES</parameter>
+ <parameter name="MEM_DDR3_ASR_ENUM" value="DDR3_ASR_MANUAL" />
+ <parameter name="MEM_DDR3_ATCL_ENUM" value="DDR3_ATCL_DISABLED" />
+ <parameter name="MEM_DDR3_BANK_ADDR_WIDTH" value="3" />
+ <parameter name="MEM_DDR3_BL_ENUM" value="DDR3_BL_BL8" />
+ <parameter name="MEM_DDR3_BT_ENUM" value="DDR3_BT_SEQUENTIAL" />
+ <parameter name="MEM_DDR3_CFG_GEN_DBE" value="false" />
+ <parameter name="MEM_DDR3_CFG_GEN_SBE" value="false" />
+ <parameter name="MEM_DDR3_CKE_PER_DIMM" value="1" />
+ <parameter name="MEM_DDR3_CK_WIDTH" value="1" />
+ <parameter name="MEM_DDR3_COL_ADDR_WIDTH" value="10" />
+ <parameter name="MEM_DDR3_DISCRETE_CS_WIDTH" value="1" />
+ <parameter name="MEM_DDR3_DISCRETE_MIRROR_ADDRESSING_EN" value="false" />
+ <parameter name="MEM_DDR3_DLL_EN" value="true" />
+ <parameter name="MEM_DDR3_DM_EN" value="true" />
+ <parameter name="MEM_DDR3_DQ_PER_DQS" value="8" />
+ <parameter name="MEM_DDR3_DQ_WIDTH" value="72" />
+ <parameter name="MEM_DDR3_DRV_STR_ENUM" value="DDR3_DRV_STR_RZQ_7" />
+ <parameter name="MEM_DDR3_FORMAT_ENUM" value="MEM_FORMAT_UDIMM" />
+ <parameter name="MEM_DDR3_HIDE_ADV_MR_SETTINGS" value="true" />
+ <parameter name="MEM_DDR3_LRDIMM_EXTENDED_CONFIG" value="000000000000000000" />
+ <parameter name="MEM_DDR3_MIRROR_ADDRESSING_EN" value="true" />
+ <parameter name="MEM_DDR3_NUM_OF_DIMMS" value="1" />
+ <parameter name="MEM_DDR3_PD_ENUM" value="DDR3_PD_OFF" />
+ <parameter name="MEM_DDR3_RANKS_PER_DIMM" value="1" />
+ <parameter name="MEM_DDR3_RDIMM_CONFIG" value="0000000000000000" />
+ <parameter name="MEM_DDR3_ROW_ADDR_WIDTH" value="15" />
+ <parameter name="MEM_DDR3_RTT_NOM_ENUM">DDR3_RTT_NOM_ODT_DISABLED</parameter>
+ <parameter name="MEM_DDR3_RTT_WR_ENUM" value="DDR3_RTT_WR_RZQ_4" />
+ <parameter name="MEM_DDR3_R_ODT0_1X1" value="off" />
+ <parameter name="MEM_DDR3_R_ODT0_2X2" value="off,off" />
+ <parameter name="MEM_DDR3_R_ODT0_4X2" value="off,off,on,on" />
+ <parameter name="MEM_DDR3_R_ODT0_4X4" value="off,off,off,off" />
+ <parameter name="MEM_DDR3_R_ODT1_2X2" value="off,off" />
+ <parameter name="MEM_DDR3_R_ODT1_4X2" value="on,on,off,off" />
+ <parameter name="MEM_DDR3_R_ODT1_4X4" value="off,off,on,on" />
+ <parameter name="MEM_DDR3_R_ODT2_4X4" value="off,off,off,off" />
+ <parameter name="MEM_DDR3_R_ODT3_4X4" value="on,on,off,off" />
+ <parameter name="MEM_DDR3_R_ODTN_1X1" value="Rank 0" />
+ <parameter name="MEM_DDR3_R_ODTN_2X2" value="Rank 0,Rank 1" />
+ <parameter name="MEM_DDR3_R_ODTN_4X2">Rank 0,Rank 1,Rank 2,Rank 3</parameter>
+ <parameter name="MEM_DDR3_R_ODTN_4X4">Rank 0,Rank 1,Rank 2,Rank 3</parameter>
+ <parameter name="MEM_DDR3_SPEEDBIN_ENUM" value="DDR3_SPEEDBIN_2133" />
+ <parameter name="MEM_DDR3_SRT_ENUM" value="DDR3_SRT_NORMAL" />
+ <parameter name="MEM_DDR3_TCL" value="14" />
+ <parameter name="MEM_DDR3_TDH_DC_MV" value="100" />
+ <parameter name="MEM_DDR3_TDH_PS" value="55" />
+ <parameter name="MEM_DDR3_TDQSCK_PS" value="180" />
+ <parameter name="MEM_DDR3_TDQSQ_PS" value="75" />
+ <parameter name="MEM_DDR3_TDQSS_CYC" value="0.27" />
+ <parameter name="MEM_DDR3_TDSH_CYC" value="0.18" />
+ <parameter name="MEM_DDR3_TDSS_CYC" value="0.18" />
+ <parameter name="MEM_DDR3_TDS_AC_MV" value="135" />
+ <parameter name="MEM_DDR3_TDS_PS" value="53" />
+ <parameter name="MEM_DDR3_TFAW_NS" value="25.0" />
+ <parameter name="MEM_DDR3_TIH_DC_MV" value="100" />
+ <parameter name="MEM_DDR3_TIH_PS" value="95" />
+ <parameter name="MEM_DDR3_TINIT_US" value="500" />
+ <parameter name="MEM_DDR3_TIS_AC_MV" value="135" />
+ <parameter name="MEM_DDR3_TIS_PS" value="60" />
+ <parameter name="MEM_DDR3_TMRD_CK_CYC" value="4" />
+ <parameter name="MEM_DDR3_TQH_CYC" value="0.38" />
+ <parameter name="MEM_DDR3_TQSH_CYC" value="0.4" />
+ <parameter name="MEM_DDR3_TRAS_NS" value="33.0" />
+ <parameter name="MEM_DDR3_TRCD_NS" value="13.09" />
+ <parameter name="MEM_DDR3_TREFI_US" value="7.8" />
+ <parameter name="MEM_DDR3_TRFC_NS" value="160.0" />
+ <parameter name="MEM_DDR3_TRP_NS" value="13.09" />
+ <parameter name="MEM_DDR3_TRRD_CYC" value="6" />
+ <parameter name="MEM_DDR3_TRTP_CYC" value="8" />
+ <parameter name="MEM_DDR3_TWLH_PS" value="125.0" />
+ <parameter name="MEM_DDR3_TWLS_PS" value="125.0" />
+ <parameter name="MEM_DDR3_TWR_NS" value="15.0" />
+ <parameter name="MEM_DDR3_TWTR_CYC" value="8" />
+ <parameter name="MEM_DDR3_USE_DEFAULT_ODT" value="true" />
+ <parameter name="MEM_DDR3_WTCL" value="10" />
+ <parameter name="MEM_DDR3_W_ODT0_1X1" value="on" />
+ <parameter name="MEM_DDR3_W_ODT0_2X2" value="on,off" />
+ <parameter name="MEM_DDR3_W_ODT0_4X2" value="off,off,on,on" />
+ <parameter name="MEM_DDR3_W_ODT0_4X4" value="on,on,off,off" />
+ <parameter name="MEM_DDR3_W_ODT1_2X2" value="off,on" />
+ <parameter name="MEM_DDR3_W_ODT1_4X2" value="on,on,off,off" />
+ <parameter name="MEM_DDR3_W_ODT1_4X4" value="off,off,on,on" />
+ <parameter name="MEM_DDR3_W_ODT2_4X4" value="off,off,on,on" />
+ <parameter name="MEM_DDR3_W_ODT3_4X4" value="on,on,off,off" />
+ <parameter name="MEM_DDR3_W_ODTN_1X1" value="Rank 0" />
+ <parameter name="MEM_DDR3_W_ODTN_2X2" value="Rank 0,Rank 1" />
+ <parameter name="MEM_DDR3_W_ODTN_4X2">Rank 0,Rank 1,Rank 2,Rank 3</parameter>
+ <parameter name="MEM_DDR3_W_ODTN_4X4">Rank 0,Rank 1,Rank 2,Rank 3</parameter>
+ <parameter name="MEM_DDR4_AC_PARITY_LATENCY">DDR4_AC_PARITY_LATENCY_DISABLE</parameter>
+ <parameter name="MEM_DDR4_AC_PERSISTENT_ERROR" value="false" />
+ <parameter name="MEM_DDR4_ALERT_N_AC_LANE" value="0" />
+ <parameter name="MEM_DDR4_ALERT_N_AC_PIN" value="0" />
+ <parameter name="MEM_DDR4_ALERT_N_DQS_GROUP" value="0" />
+ <parameter name="MEM_DDR4_ALERT_N_PLACEMENT_ENUM">DDR4_ALERT_N_PLACEMENT_DATA_LANES</parameter>
+ <parameter name="MEM_DDR4_ALERT_PAR_EN" value="true" />
+ <parameter name="MEM_DDR4_ASR_ENUM">DDR4_ASR_MANUAL_NORMAL</parameter>
+ <parameter name="MEM_DDR4_ATCL_ENUM" value="DDR4_ATCL_DISABLED" />
+ <parameter name="MEM_DDR4_BANK_ADDR_WIDTH" value="2" />
+ <parameter name="MEM_DDR4_BANK_GROUP_WIDTH" value="2" />
+ <parameter name="MEM_DDR4_BL_ENUM" value="DDR4_BL_BL8" />
+ <parameter name="MEM_DDR4_BT_ENUM" value="DDR4_BT_SEQUENTIAL" />
+ <parameter name="MEM_DDR4_CAL_MODE" value="0" />
+ <parameter name="MEM_DDR4_CFG_GEN_DBE" value="false" />
+ <parameter name="MEM_DDR4_CFG_GEN_SBE" value="false" />
+ <parameter name="MEM_DDR4_CHIP_ID_WIDTH" value="0" />
+ <parameter name="MEM_DDR4_CKE_PER_DIMM" value="1" />
+ <parameter name="MEM_DDR4_CK_WIDTH" value="2" />
+ <parameter name="MEM_DDR4_COL_ADDR_WIDTH" value="10" />
+ <parameter name="MEM_DDR4_DB_DQ_DRV_ENUM">DDR4_DB_DRV_STR_RZQ_7</parameter>
+ <parameter name="MEM_DDR4_DB_RTT_NOM_ENUM">DDR4_DB_RTT_NOM_ODT_DISABLED</parameter>
+ <parameter name="MEM_DDR4_DB_RTT_PARK_ENUM">DDR4_DB_RTT_PARK_ODT_DISABLED</parameter>
+ <parameter name="MEM_DDR4_DB_RTT_WR_ENUM">DDR4_DB_RTT_WR_RZQ_3</parameter>
+ <parameter name="MEM_DDR4_DEFAULT_VREFOUT" value="true" />
+ <parameter name="MEM_DDR4_DISCRETE_CS_WIDTH" value="1" />
+ <parameter name="MEM_DDR4_DISCRETE_MIRROR_ADDRESSING_EN" value="false" />
+ <parameter name="MEM_DDR4_DLL_EN" value="true" />
+ <parameter name="MEM_DDR4_DM_EN" value="true" />
+ <parameter name="MEM_DDR4_DQ_PER_DQS" value="8" />
+ <parameter name="MEM_DDR4_DQ_WIDTH" value="72" />
+ <parameter name="MEM_DDR4_DRV_STR_ENUM" value="DDR4_DRV_STR_RZQ_7" />
+ <parameter name="MEM_DDR4_FINE_GRANULARITY_REFRESH">DDR4_FINE_REFRESH_FIXED_1X</parameter>
+ <parameter name="MEM_DDR4_FORMAT_ENUM" value="MEM_FORMAT_SODIMM" />
+ <parameter name="MEM_DDR4_GEARDOWN" value="DDR4_GEARDOWN_HR" />
+ <parameter name="MEM_DDR4_HIDE_ADV_MR_SETTINGS" value="true" />
+ <parameter name="MEM_DDR4_INTERNAL_VREFDQ_MONITOR" value="false" />
+ <parameter name="MEM_DDR4_LRDIMM_ODT_LESS_BS" value="true" />
+ <parameter name="MEM_DDR4_LRDIMM_ODT_LESS_BS_PARK_OHM" value="240" />
+ <parameter name="MEM_DDR4_LRDIMM_VREFDQ_VALUE" value="1D" />
+ <parameter name="MEM_DDR4_MAX_POWERDOWN" value="false" />
+ <parameter name="MEM_DDR4_MIRROR_ADDRESSING_EN" value="true" />
+ <parameter name="MEM_DDR4_MPR_READ_FORMAT">DDR4_MPR_READ_FORMAT_SERIAL</parameter>
+ <parameter name="MEM_DDR4_NUM_OF_DIMMS" value="1" />
+ <parameter name="MEM_DDR4_ODT_IN_POWERDOWN" value="true" />
+ <parameter name="MEM_DDR4_PER_DRAM_ADDR" value="false" />
+ <parameter name="MEM_DDR4_RANKS_PER_DIMM" value="2" />
+ <parameter name="MEM_DDR4_RCD_CA_IBT_ENUM" value="DDR4_RCD_CA_IBT_100" />
+ <parameter name="MEM_DDR4_RCD_CKE_IBT_ENUM">DDR4_RCD_CKE_IBT_100</parameter>
+ <parameter name="MEM_DDR4_RCD_CS_IBT_ENUM" value="DDR4_RCD_CS_IBT_100" />
+ <parameter name="MEM_DDR4_RCD_ODT_IBT_ENUM">DDR4_RCD_ODT_IBT_100</parameter>
+ <parameter name="MEM_DDR4_READ_DBI" value="false" />
+ <parameter name="MEM_DDR4_READ_PREAMBLE" value="2" />
+ <parameter name="MEM_DDR4_READ_PREAMBLE_TRAINING" value="false" />
+ <parameter name="MEM_DDR4_ROW_ADDR_WIDTH" value="16" />
+ <parameter name="MEM_DDR4_RTT_NOM_ENUM" value="DDR4_RTT_NOM_RZQ_4" />
+ <parameter name="MEM_DDR4_RTT_PARK">DDR4_RTT_PARK_ODT_DISABLED</parameter>
+ <parameter name="MEM_DDR4_RTT_WR_ENUM">DDR4_RTT_WR_ODT_DISABLED</parameter>
+ <parameter name="MEM_DDR4_R_ODT0_1X1" value="on" />
+ <parameter name="MEM_DDR4_R_ODT0_2X2" value="on,off" />
+ <parameter name="MEM_DDR4_R_ODT0_4X2" value="off,off,on,on" />
+ <parameter name="MEM_DDR4_R_ODT0_4X4" value="off,off,off,off" />
+ <parameter name="MEM_DDR4_R_ODT1_2X2" value="off,on" />
+ <parameter name="MEM_DDR4_R_ODT1_4X2" value="on,on,off,off" />
+ <parameter name="MEM_DDR4_R_ODT1_4X4" value="off,off,on,on" />
+ <parameter name="MEM_DDR4_R_ODT2_4X4" value="off,off,off,off" />
+ <parameter name="MEM_DDR4_R_ODT3_4X4" value="on,on,off,off" />
+ <parameter name="MEM_DDR4_R_ODTN_1X1" value="Rank 0" />
+ <parameter name="MEM_DDR4_R_ODTN_2X2" value="Rank 0,Rank 1" />
+ <parameter name="MEM_DDR4_R_ODTN_4X2">Rank 0,Rank 1,Rank 2,Rank 3</parameter>
+ <parameter name="MEM_DDR4_R_ODTN_4X4">Rank 0,Rank 1,Rank 2,Rank 3</parameter>
+ <parameter name="MEM_DDR4_SELF_RFSH_ABORT" value="false" />
+ <parameter name="MEM_DDR4_SPD_133_RCD_DB_VENDOR_LSB" value="0" />
+ <parameter name="MEM_DDR4_SPD_134_RCD_DB_VENDOR_MSB" value="0" />
+ <parameter name="MEM_DDR4_SPD_135_RCD_REV" value="0" />
+ <parameter name="MEM_DDR4_SPD_137_RCD_CA_DRV" value="101" />
+ <parameter name="MEM_DDR4_SPD_138_RCD_CK_DRV" value="5" />
+ <parameter name="MEM_DDR4_SPD_139_DB_REV" value="0" />
+ <parameter name="MEM_DDR4_SPD_140_DRAM_VREFDQ_R0" value="29" />
+ <parameter name="MEM_DDR4_SPD_141_DRAM_VREFDQ_R1" value="29" />
+ <parameter name="MEM_DDR4_SPD_142_DRAM_VREFDQ_R2" value="29" />
+ <parameter name="MEM_DDR4_SPD_143_DRAM_VREFDQ_R3" value="29" />
+ <parameter name="MEM_DDR4_SPD_144_DB_VREFDQ" value="37" />
+ <parameter name="MEM_DDR4_SPD_145_DB_MDQ_DRV" value="21" />
+ <parameter name="MEM_DDR4_SPD_148_DRAM_DRV" value="0" />
+ <parameter name="MEM_DDR4_SPD_149_DRAM_RTT_WR_NOM" value="20" />
+ <parameter name="MEM_DDR4_SPD_152_DRAM_RTT_PARK" value="39" />
+ <parameter name="MEM_DDR4_SPEEDBIN_ENUM" value="DDR4_SPEEDBIN_2133" />
+ <parameter name="MEM_DDR4_TCCD_L_CYC" value="6" />
+ <parameter name="MEM_DDR4_TCCD_S_CYC" value="4" />
+ <parameter name="MEM_DDR4_TCL" value="11" />
+ <parameter name="MEM_DDR4_TDIVW_DJ_CYC" value="0.1" />
+ <parameter name="MEM_DDR4_TDIVW_TOTAL_UI" value="0.2" />
+ <parameter name="MEM_DDR4_TDQSCK_PS" value="180" />
+ <parameter name="MEM_DDR4_TDQSQ_PS" value="66" />
+ <parameter name="MEM_DDR4_TDQSQ_UI" value="0.16" />
+ <parameter name="MEM_DDR4_TDQSS_CYC" value="0.27" />
+ <parameter name="MEM_DDR4_TDSH_CYC" value="0.18" />
+ <parameter name="MEM_DDR4_TDSS_CYC" value="0.18" />
+ <parameter name="MEM_DDR4_TDVWP_UI" value="0.69" />
+ <parameter name="MEM_DDR4_TEMP_CONTROLLED_RFSH_ENA" value="false" />
+ <parameter name="MEM_DDR4_TEMP_CONTROLLED_RFSH_RANGE">DDR4_TEMP_CONTROLLED_RFSH_NORMAL</parameter>
+ <parameter name="MEM_DDR4_TEMP_SENSOR_READOUT" value="false" />
+ <parameter name="MEM_DDR4_TFAW_DLR_CYC" value="16" />
+ <parameter name="MEM_DDR4_TFAW_NS" value="25.0" />
+ <parameter name="MEM_DDR4_TIH_DC_MV" value="75" />
+ <parameter name="MEM_DDR4_TIH_PS" value="105" />
+ <parameter name="MEM_DDR4_TINIT_US" value="500" />
+ <parameter name="MEM_DDR4_TIS_AC_MV" value="100" />
+ <parameter name="MEM_DDR4_TIS_PS" value="80" />
+ <parameter name="MEM_DDR4_TMRD_CK_CYC" value="8" />
+ <parameter name="MEM_DDR4_TQH_CYC" value="0.38" />
+ <parameter name="MEM_DDR4_TQH_UI" value="0.76" />
+ <parameter name="MEM_DDR4_TQSH_CYC" value="0.4" />
+ <parameter name="MEM_DDR4_TRAS_NS" value="33.0" />
+ <parameter name="MEM_DDR4_TRCD_NS" value="14.06" />
+ <parameter name="MEM_DDR4_TREFI_US" value="7.8" />
+ <parameter name="MEM_DDR4_TRFC_DLR_NS" value="90.0" />
+ <parameter name="MEM_DDR4_TRFC_NS" value="260.0" />
+ <parameter name="MEM_DDR4_TRP_NS" value="14.06" />
+ <parameter name="MEM_DDR4_TRRD_DLR_CYC" value="4" />
+ <parameter name="MEM_DDR4_TRRD_L_CYC" value="6" />
+ <parameter name="MEM_DDR4_TRRD_S_CYC" value="4" />
+ <parameter name="MEM_DDR4_TWLH_CYC" value="0.13" />
+ <parameter name="MEM_DDR4_TWLH_PS" value="0.0" />
+ <parameter name="MEM_DDR4_TWLS_CYC" value="0.13" />
+ <parameter name="MEM_DDR4_TWLS_PS" value="0.0" />
+ <parameter name="MEM_DDR4_TWR_NS" value="15.0" />
+ <parameter name="MEM_DDR4_TWTR_L_CYC" value="8" />
+ <parameter name="MEM_DDR4_TWTR_S_CYC" value="3" />
+ <parameter name="MEM_DDR4_USER_VREFDQ_TRAINING_RANGE">DDR4_VREFDQ_TRAINING_RANGE_0</parameter>
+ <parameter name="MEM_DDR4_USER_VREFDQ_TRAINING_VALUE" value="68.0" />
+ <parameter name="MEM_DDR4_USE_DEFAULT_ODT" value="true" />
+ <parameter name="MEM_DDR4_VDIVW_TOTAL" value="136" />
+ <parameter name="MEM_DDR4_WRITE_CRC" value="false" />
+ <parameter name="MEM_DDR4_WRITE_DBI" value="false" />
+ <parameter name="MEM_DDR4_WRITE_PREAMBLE" value="1" />
+ <parameter name="MEM_DDR4_WTCL" value="9" />
+ <parameter name="MEM_DDR4_W_ODT0_1X1" value="on" />
+ <parameter name="MEM_DDR4_W_ODT0_2X2" value="on,off" />
+ <parameter name="MEM_DDR4_W_ODT0_4X2" value="off,off,on,on" />
+ <parameter name="MEM_DDR4_W_ODT0_4X4" value="on,on,off,off" />
+ <parameter name="MEM_DDR4_W_ODT1_2X2" value="off,on" />
+ <parameter name="MEM_DDR4_W_ODT1_4X2" value="on,on,off,off" />
+ <parameter name="MEM_DDR4_W_ODT1_4X4" value="off,off,on,on" />
+ <parameter name="MEM_DDR4_W_ODT2_4X4" value="off,off,on,on" />
+ <parameter name="MEM_DDR4_W_ODT3_4X4" value="on,on,off,off" />
+ <parameter name="MEM_DDR4_W_ODTN_1X1" value="Rank 0" />
+ <parameter name="MEM_DDR4_W_ODTN_2X2" value="Rank 0,Rank 1" />
+ <parameter name="MEM_DDR4_W_ODTN_4X2">Rank 0,Rank 1,Rank 2,Rank 3</parameter>
+ <parameter name="MEM_DDR4_W_ODTN_4X4">Rank 0,Rank 1,Rank 2,Rank 3</parameter>
+ <parameter name="MEM_LPDDR3_BANK_ADDR_WIDTH" value="3" />
+ <parameter name="MEM_LPDDR3_BL" value="LPDDR3_BL_BL8" />
+ <parameter name="MEM_LPDDR3_CK_WIDTH" value="1" />
+ <parameter name="MEM_LPDDR3_COL_ADDR_WIDTH" value="10" />
+ <parameter name="MEM_LPDDR3_DATA_LATENCY" value="LPDDR3_DL_RL12_WL6" />
+ <parameter name="MEM_LPDDR3_DISCRETE_CS_WIDTH" value="1" />
+ <parameter name="MEM_LPDDR3_DM_EN" value="true" />
+ <parameter name="MEM_LPDDR3_DQODT">LPDDR3_DQODT_DISABLE</parameter>
+ <parameter name="MEM_LPDDR3_DQ_WIDTH" value="32" />
+ <parameter name="MEM_LPDDR3_DRV_STR">LPDDR3_DRV_STR_40D_40U</parameter>
+ <parameter name="MEM_LPDDR3_PDODT">LPDDR3_PDODT_DISABLED</parameter>
+ <parameter name="MEM_LPDDR3_ROW_ADDR_WIDTH" value="15" />
+ <parameter name="MEM_LPDDR3_R_ODT0_1X1" value="off" />
+ <parameter name="MEM_LPDDR3_R_ODT0_2X2" value="off,off" />
+ <parameter name="MEM_LPDDR3_R_ODT0_4X4" value="off,off,on,on" />
+ <parameter name="MEM_LPDDR3_R_ODT1_2X2" value="off,off" />
+ <parameter name="MEM_LPDDR3_R_ODT1_4X4" value="off,off,off,off" />
+ <parameter name="MEM_LPDDR3_R_ODT2_4X4" value="on,on,off,off" />
+ <parameter name="MEM_LPDDR3_R_ODT3_4X4" value="off,off,off,off" />
+ <parameter name="MEM_LPDDR3_R_ODTN_1X1" value="Rank 0" />
+ <parameter name="MEM_LPDDR3_R_ODTN_2X2" value="Rank 0,Rank 1" />
+ <parameter name="MEM_LPDDR3_R_ODTN_4X4">Rank 0,Rank 1,Rank 2,Rank 3</parameter>
+ <parameter name="MEM_LPDDR3_SPEEDBIN_ENUM">LPDDR3_SPEEDBIN_1600</parameter>
+ <parameter name="MEM_LPDDR3_TDH_DC_MV" value="100" />
+ <parameter name="MEM_LPDDR3_TDH_PS" value="100" />
+ <parameter name="MEM_LPDDR3_TDQSCKDL" value="614" />
+ <parameter name="MEM_LPDDR3_TDQSQ_PS" value="135" />
+ <parameter name="MEM_LPDDR3_TDQSS_CYC" value="1.25" />
+ <parameter name="MEM_LPDDR3_TDSH_CYC" value="0.2" />
+ <parameter name="MEM_LPDDR3_TDSS_CYC" value="0.2" />
+ <parameter name="MEM_LPDDR3_TDS_AC_MV" value="150" />
+ <parameter name="MEM_LPDDR3_TDS_PS" value="75" />
+ <parameter name="MEM_LPDDR3_TFAW_NS" value="50.0" />
+ <parameter name="MEM_LPDDR3_TIH_DC_MV" value="100" />
+ <parameter name="MEM_LPDDR3_TIH_PS" value="100" />
+ <parameter name="MEM_LPDDR3_TINIT_US" value="500" />
+ <parameter name="MEM_LPDDR3_TIS_AC_MV" value="150" />
+ <parameter name="MEM_LPDDR3_TIS_PS" value="75" />
+ <parameter name="MEM_LPDDR3_TMRR_CK_CYC" value="4" />
+ <parameter name="MEM_LPDDR3_TMRW_CK_CYC" value="10" />
+ <parameter name="MEM_LPDDR3_TQH_CYC" value="0.38" />
+ <parameter name="MEM_LPDDR3_TQSH_CYC" value="0.38" />
+ <parameter name="MEM_LPDDR3_TRAS_NS" value="42.5" />
+ <parameter name="MEM_LPDDR3_TRCD_NS" value="18.75" />
+ <parameter name="MEM_LPDDR3_TREFI_US" value="3.9" />
+ <parameter name="MEM_LPDDR3_TRFC_NS" value="210.0" />
+ <parameter name="MEM_LPDDR3_TRP_NS" value="18.75" />
+ <parameter name="MEM_LPDDR3_TRRD_CYC" value="2" />
+ <parameter name="MEM_LPDDR3_TRTP_CYC" value="4" />
+ <parameter name="MEM_LPDDR3_TWLH_PS" value="175.0" />
+ <parameter name="MEM_LPDDR3_TWLS_PS" value="175.0" />
+ <parameter name="MEM_LPDDR3_TWR_NS" value="15.0" />
+ <parameter name="MEM_LPDDR3_TWTR_CYC" value="4" />
+ <parameter name="MEM_LPDDR3_USE_DEFAULT_ODT" value="true" />
+ <parameter name="MEM_LPDDR3_W_ODT0_1X1" value="on" />
+ <parameter name="MEM_LPDDR3_W_ODT0_2X2" value="on,off" />
+ <parameter name="MEM_LPDDR3_W_ODT0_4X4" value="on,on,on,on" />
+ <parameter name="MEM_LPDDR3_W_ODT1_2X2" value="off,on" />
+ <parameter name="MEM_LPDDR3_W_ODT1_4X4" value="off,off,off,off" />
+ <parameter name="MEM_LPDDR3_W_ODT2_4X4" value="on,on,on,on" />
+ <parameter name="MEM_LPDDR3_W_ODT3_4X4" value="off,off,off,off" />
+ <parameter name="MEM_LPDDR3_W_ODTN_1X1" value="Rank 0" />
+ <parameter name="MEM_LPDDR3_W_ODTN_2X2" value="Rank 0,Rank 1" />
+ <parameter name="MEM_LPDDR3_W_ODTN_4X4">Rank 0,Rank 1,Rank 2,Rank 3</parameter>
+ <parameter name="MEM_QDR2_ADDR_WIDTH" value="19" />
+ <parameter name="MEM_QDR2_BL" value="4" />
+ <parameter name="MEM_QDR2_BWS_EN" value="true" />
+ <parameter name="MEM_QDR2_DATA_PER_DEVICE" value="36" />
+ <parameter name="MEM_QDR2_INTERNAL_JITTER_NS" value="0.08" />
+ <parameter name="MEM_QDR2_SPEEDBIN_ENUM" value="QDR2_SPEEDBIN_633" />
+ <parameter name="MEM_QDR2_TCCQO_NS" value="0.45" />
+ <parameter name="MEM_QDR2_TCQDOH_NS" value="-0.09" />
+ <parameter name="MEM_QDR2_TCQD_NS" value="0.09" />
+ <parameter name="MEM_QDR2_TCQH_NS" value="0.71" />
+ <parameter name="MEM_QDR2_THA_NS" value="0.18" />
+ <parameter name="MEM_QDR2_THD_NS" value="0.18" />
+ <parameter name="MEM_QDR2_TRL_CYC" value="2.5" />
+ <parameter name="MEM_QDR2_TSA_NS" value="0.23" />
+ <parameter name="MEM_QDR2_TSD_NS" value="0.23" />
+ <parameter name="MEM_QDR2_WIDTH_EXPANDED" value="false" />
+ <parameter name="MEM_QDR4_AC_ODT_MODE_ENUM" value="QDR4_ODT_25_PCT" />
+ <parameter name="MEM_QDR4_ADDR_INV_ENA" value="false" />
+ <parameter name="MEM_QDR4_ADDR_WIDTH" value="21" />
+ <parameter name="MEM_QDR4_CK_ODT_MODE_ENUM" value="QDR4_ODT_25_PCT" />
+ <parameter name="MEM_QDR4_DATA_INV_ENA" value="false" />
+ <parameter name="MEM_QDR4_DATA_ODT_MODE_ENUM" value="QDR4_ODT_25_PCT" />
+ <parameter name="MEM_QDR4_DQ_PER_PORT_PER_DEVICE" value="36" />
+ <parameter name="MEM_QDR4_MEM_TYPE_ENUM" value="MEM_XP" />
+ <parameter name="MEM_QDR4_PD_OUTPUT_DRIVE_MODE_ENUM">QDR4_OUTPUT_DRIVE_25_PCT</parameter>
+ <parameter name="MEM_QDR4_PU_OUTPUT_DRIVE_MODE_ENUM">QDR4_OUTPUT_DRIVE_25_PCT</parameter>
+ <parameter name="MEM_QDR4_SKIP_ODT_SWEEPING" value="true" />
+ <parameter name="MEM_QDR4_SPEEDBIN_ENUM" value="QDR4_SPEEDBIN_2133" />
+ <parameter name="MEM_QDR4_TASH_PS" value="170" />
+ <parameter name="MEM_QDR4_TCKDK_MAX_PS" value="150" />
+ <parameter name="MEM_QDR4_TCKDK_MIN_PS" value="-150" />
+ <parameter name="MEM_QDR4_TCKQK_MAX_PS" value="225" />
+ <parameter name="MEM_QDR4_TCSH_PS" value="170" />
+ <parameter name="MEM_QDR4_TISH_PS" value="150" />
+ <parameter name="MEM_QDR4_TQH_CYC" value="0.4" />
+ <parameter name="MEM_QDR4_TQKQ_MAX_PS" value="75" />
+ <parameter name="MEM_QDR4_WIDTH_EXPANDED" value="false" />
+ <parameter name="MEM_RLD2_ADDR_WIDTH" value="21" />
+ <parameter name="MEM_RLD2_BANK_ADDR_WIDTH" value="3" />
+ <parameter name="MEM_RLD2_BL" value="4" />
+ <parameter name="MEM_RLD2_CONFIG_ENUM">RLD2_CONFIG_TRC_8_TRL_8_TWL_9</parameter>
+ <parameter name="MEM_RLD2_DM_EN" value="true" />
+ <parameter name="MEM_RLD2_DQ_PER_DEVICE" value="9" />
+ <parameter name="MEM_RLD2_DRIVE_IMPEDENCE_ENUM">RLD2_DRIVE_IMPEDENCE_INTERNAL_50</parameter>
+ <parameter name="MEM_RLD2_ODT_MODE_ENUM" value="RLD2_ODT_ON" />
+ <parameter name="MEM_RLD2_REFRESH_INTERVAL_US" value="0.24" />
+ <parameter name="MEM_RLD2_SPEEDBIN_ENUM" value="RLD2_SPEEDBIN_18" />
+ <parameter name="MEM_RLD2_TAH_NS" value="0.3" />
+ <parameter name="MEM_RLD2_TAS_NS" value="0.3" />
+ <parameter name="MEM_RLD2_TCKDK_MAX_NS" value="0.3" />
+ <parameter name="MEM_RLD2_TCKDK_MIN_NS" value="-0.3" />
+ <parameter name="MEM_RLD2_TCKH_CYC" value="0.45" />
+ <parameter name="MEM_RLD2_TCKQK_MAX_NS" value="0.2" />
+ <parameter name="MEM_RLD2_TDH_NS" value="0.17" />
+ <parameter name="MEM_RLD2_TDS_NS" value="0.17" />
+ <parameter name="MEM_RLD2_TQKH_HCYC" value="0.9" />
+ <parameter name="MEM_RLD2_TQKQ_MAX_NS" value="0.12" />
+ <parameter name="MEM_RLD2_TQKQ_MIN_NS" value="-0.12" />
+ <parameter name="MEM_RLD2_WIDTH_EXPANDED" value="false" />
+ <parameter name="MEM_RLD3_ADDR_WIDTH" value="20" />
+ <parameter name="MEM_RLD3_AREF_PROTOCOL_ENUM" value="RLD3_AREF_BAC" />
+ <parameter name="MEM_RLD3_BANK_ADDR_WIDTH" value="4" />
+ <parameter name="MEM_RLD3_BL" value="2" />
+ <parameter name="MEM_RLD3_DATA_LATENCY_MODE_ENUM" value="RLD3_DL_RL16_WL17" />
+ <parameter name="MEM_RLD3_DEPTH_EXPANDED" value="false" />
+ <parameter name="MEM_RLD3_DM_EN" value="true" />
+ <parameter name="MEM_RLD3_DQ_PER_DEVICE" value="36" />
+ <parameter name="MEM_RLD3_ODT_MODE_ENUM" value="RLD3_ODT_40" />
+ <parameter name="MEM_RLD3_OUTPUT_DRIVE_MODE_ENUM">RLD3_OUTPUT_DRIVE_40</parameter>
+ <parameter name="MEM_RLD3_SPEEDBIN_ENUM" value="RLD3_SPEEDBIN_093E" />
+ <parameter name="MEM_RLD3_TCKDK_MAX_CYC" value="0.27" />
+ <parameter name="MEM_RLD3_TCKDK_MIN_CYC" value="-0.27" />
+ <parameter name="MEM_RLD3_TCKQK_MAX_PS" value="135" />
+ <parameter name="MEM_RLD3_TDH_DC_MV" value="100" />
+ <parameter name="MEM_RLD3_TDH_PS" value="5" />
+ <parameter name="MEM_RLD3_TDS_AC_MV" value="150" />
+ <parameter name="MEM_RLD3_TDS_PS" value="-30" />
+ <parameter name="MEM_RLD3_TIH_DC_MV" value="100" />
+ <parameter name="MEM_RLD3_TIH_PS" value="65" />
+ <parameter name="MEM_RLD3_TIS_AC_MV" value="150" />
+ <parameter name="MEM_RLD3_TIS_PS" value="85" />
+ <parameter name="MEM_RLD3_TQH_CYC" value="0.38" />
+ <parameter name="MEM_RLD3_TQKQ_MAX_PS" value="75" />
+ <parameter name="MEM_RLD3_T_RC_MODE_ENUM" value="RLD3_TRC_9" />
+ <parameter name="MEM_RLD3_WIDTH_EXPANDED" value="false" />
+ <parameter name="MEM_RLD3_WRITE_PROTOCOL_ENUM" value="RLD3_WRITE_1BANK" />
+ <parameter name="PHY_DDR3_CAL_ADDR0" value="0" />
+ <parameter name="PHY_DDR3_CAL_ADDR1" value="8" />
+ <parameter name="PHY_DDR3_CAL_ENABLE_NON_DES" value="true" />
+ <parameter name="PHY_DDR3_CONFIG_ENUM">CONFIG_PHY_AND_HARD_CTRL</parameter>
+ <parameter name="PHY_DDR3_CORE_CLKS_SHARING_ENUM">CORE_CLKS_SHARING_DISABLED</parameter>
+ <parameter name="PHY_DDR3_CORE_CLKS_SHARING_EXPOSE_SLAVE_OUT" value="false" />
+ <parameter name="PHY_DDR3_DEFAULT_IO" value="true" />
+ <parameter name="PHY_DDR3_DEFAULT_REF_CLK_FREQ" value="true" />
+ <parameter name="PHY_DDR3_HPS_ENABLE_EARLY_RELEASE" value="false" />
+ <parameter name="PHY_DDR3_IO_VOLTAGE" value="1.5" />
+ <parameter name="PHY_DDR3_MEM_CLK_FREQ_MHZ" value="1066.667" />
+ <parameter name="PHY_DDR3_RATE_ENUM" value="RATE_QUARTER" />
+ <parameter name="PHY_DDR3_REF_CLK_JITTER_PS" value="10.0" />
+ <parameter name="PHY_DDR3_USER_AC_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_DDR3_USER_AC_MODE_ENUM" value="unset" />
+ <parameter name="PHY_DDR3_USER_AC_SLEW_RATE_ENUM" value="SLEW_RATE_FAST" />
+ <parameter name="PHY_DDR3_USER_AUTO_STARTING_VREFIN_EN" value="true" />
+ <parameter name="PHY_DDR3_USER_CK_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_DDR3_USER_CK_MODE_ENUM" value="unset" />
+ <parameter name="PHY_DDR3_USER_CK_SLEW_RATE_ENUM" value="SLEW_RATE_FAST" />
+ <parameter name="PHY_DDR3_USER_DATA_IN_MODE_ENUM" value="unset" />
+ <parameter name="PHY_DDR3_USER_DATA_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_DDR3_USER_DATA_OUT_MODE_ENUM" value="unset" />
+ <parameter name="PHY_DDR3_USER_PERIODIC_OCT_RECAL_ENUM">PERIODIC_OCT_RECAL_AUTO</parameter>
+ <parameter name="PHY_DDR3_USER_PING_PONG_EN" value="false" />
+ <parameter name="PHY_DDR3_USER_PLL_REF_CLK_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_DDR3_USER_REF_CLK_FREQ_MHZ" value="-1.0" />
+ <parameter name="PHY_DDR3_USER_RZQ_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_DDR3_USER_STARTING_VREFIN" value="70.0" />
+ <parameter name="PHY_DDR4_CONFIG_ENUM">CONFIG_PHY_AND_HARD_CTRL</parameter>
+ <parameter name="PHY_DDR4_CORE_CLKS_SHARING_ENUM">CORE_CLKS_SHARING_DISABLED</parameter>
+ <parameter name="PHY_DDR4_CORE_CLKS_SHARING_EXPOSE_SLAVE_OUT" value="false" />
+ <parameter name="PHY_DDR4_DEFAULT_IO" value="false" />
+ <parameter name="PHY_DDR4_DEFAULT_REF_CLK_FREQ" value="false" />
+ <parameter name="PHY_DDR4_HPS_ENABLE_EARLY_RELEASE" value="false" />
+ <parameter name="PHY_DDR4_IO_VOLTAGE" value="1.2" />
+ <parameter name="PHY_DDR4_MEM_CLK_FREQ_MHZ" value="800.0" />
+ <parameter name="PHY_DDR4_RATE_ENUM" value="RATE_QUARTER" />
+ <parameter name="PHY_DDR4_REF_CLK_JITTER_PS" value="10.0" />
+ <parameter name="PHY_DDR4_USER_AC_IO_STD_ENUM" value="IO_STD_SSTL_12" />
+ <parameter name="PHY_DDR4_USER_AC_MODE_ENUM" value="OUT_OCT_40_CAL" />
+ <parameter name="PHY_DDR4_USER_AC_SLEW_RATE_ENUM" value="SLEW_RATE_FAST" />
+ <parameter name="PHY_DDR4_USER_AUTO_STARTING_VREFIN_EN" value="true" />
+ <parameter name="PHY_DDR4_USER_CK_IO_STD_ENUM" value="IO_STD_SSTL_12" />
+ <parameter name="PHY_DDR4_USER_CK_MODE_ENUM" value="OUT_OCT_40_CAL" />
+ <parameter name="PHY_DDR4_USER_CK_SLEW_RATE_ENUM" value="SLEW_RATE_FAST" />
+ <parameter name="PHY_DDR4_USER_DATA_IN_MODE_ENUM" value="IN_OCT_120_CAL" />
+ <parameter name="PHY_DDR4_USER_DATA_IO_STD_ENUM" value="IO_STD_POD_12" />
+ <parameter name="PHY_DDR4_USER_DATA_OUT_MODE_ENUM" value="OUT_OCT_34_CAL" />
+ <parameter name="PHY_DDR4_USER_PERIODIC_OCT_RECAL_ENUM">PERIODIC_OCT_RECAL_AUTO</parameter>
+ <parameter name="PHY_DDR4_USER_PING_PONG_EN" value="false" />
+ <parameter name="PHY_DDR4_USER_PLL_REF_CLK_IO_STD_ENUM" value="IO_STD_CMOS_12" />
+ <parameter name="PHY_DDR4_USER_REF_CLK_FREQ_MHZ" value="25.0" />
+ <parameter name="PHY_DDR4_USER_RZQ_IO_STD_ENUM" value="IO_STD_CMOS_12" />
+ <parameter name="PHY_DDR4_USER_STARTING_VREFIN" value="60.0" />
+ <parameter name="PHY_LPDDR3_CONFIG_ENUM">CONFIG_PHY_AND_HARD_CTRL</parameter>
+ <parameter name="PHY_LPDDR3_CORE_CLKS_SHARING_ENUM">CORE_CLKS_SHARING_DISABLED</parameter>
+ <parameter name="PHY_LPDDR3_CORE_CLKS_SHARING_EXPOSE_SLAVE_OUT" value="false" />
+ <parameter name="PHY_LPDDR3_DEFAULT_IO" value="true" />
+ <parameter name="PHY_LPDDR3_DEFAULT_REF_CLK_FREQ" value="true" />
+ <parameter name="PHY_LPDDR3_HPS_ENABLE_EARLY_RELEASE" value="false" />
+ <parameter name="PHY_LPDDR3_IO_VOLTAGE" value="1.2" />
+ <parameter name="PHY_LPDDR3_MEM_CLK_FREQ_MHZ" value="800.0" />
+ <parameter name="PHY_LPDDR3_RATE_ENUM" value="RATE_QUARTER" />
+ <parameter name="PHY_LPDDR3_REF_CLK_JITTER_PS" value="10.0" />
+ <parameter name="PHY_LPDDR3_USER_AC_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_LPDDR3_USER_AC_MODE_ENUM" value="unset" />
+ <parameter name="PHY_LPDDR3_USER_AC_SLEW_RATE_ENUM" value="SLEW_RATE_FAST" />
+ <parameter name="PHY_LPDDR3_USER_AUTO_STARTING_VREFIN_EN" value="true" />
+ <parameter name="PHY_LPDDR3_USER_CK_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_LPDDR3_USER_CK_MODE_ENUM" value="unset" />
+ <parameter name="PHY_LPDDR3_USER_CK_SLEW_RATE_ENUM" value="SLEW_RATE_FAST" />
+ <parameter name="PHY_LPDDR3_USER_DATA_IN_MODE_ENUM" value="unset" />
+ <parameter name="PHY_LPDDR3_USER_DATA_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_LPDDR3_USER_DATA_OUT_MODE_ENUM" value="unset" />
+ <parameter name="PHY_LPDDR3_USER_PERIODIC_OCT_RECAL_ENUM">PERIODIC_OCT_RECAL_AUTO</parameter>
+ <parameter name="PHY_LPDDR3_USER_PING_PONG_EN" value="false" />
+ <parameter name="PHY_LPDDR3_USER_PLL_REF_CLK_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_LPDDR3_USER_REF_CLK_FREQ_MHZ" value="-1.0" />
+ <parameter name="PHY_LPDDR3_USER_RZQ_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_LPDDR3_USER_STARTING_VREFIN" value="70.0" />
+ <parameter name="PHY_QDR2_CONFIG_ENUM">CONFIG_PHY_AND_SOFT_CTRL</parameter>
+ <parameter name="PHY_QDR2_CORE_CLKS_SHARING_ENUM">CORE_CLKS_SHARING_DISABLED</parameter>
+ <parameter name="PHY_QDR2_CORE_CLKS_SHARING_EXPOSE_SLAVE_OUT" value="false" />
+ <parameter name="PHY_QDR2_DEFAULT_IO" value="true" />
+ <parameter name="PHY_QDR2_DEFAULT_REF_CLK_FREQ" value="true" />
+ <parameter name="PHY_QDR2_HPS_ENABLE_EARLY_RELEASE" value="false" />
+ <parameter name="PHY_QDR2_IO_VOLTAGE" value="1.5" />
+ <parameter name="PHY_QDR2_MEM_CLK_FREQ_MHZ" value="633.333" />
+ <parameter name="PHY_QDR2_RATE_ENUM" value="RATE_HALF" />
+ <parameter name="PHY_QDR2_REF_CLK_JITTER_PS" value="10.0" />
+ <parameter name="PHY_QDR2_USER_AC_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_QDR2_USER_AC_MODE_ENUM" value="unset" />
+ <parameter name="PHY_QDR2_USER_AC_SLEW_RATE_ENUM" value="SLEW_RATE_FAST" />
+ <parameter name="PHY_QDR2_USER_AUTO_STARTING_VREFIN_EN" value="true" />
+ <parameter name="PHY_QDR2_USER_CK_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_QDR2_USER_CK_MODE_ENUM" value="unset" />
+ <parameter name="PHY_QDR2_USER_CK_SLEW_RATE_ENUM" value="SLEW_RATE_FAST" />
+ <parameter name="PHY_QDR2_USER_DATA_IN_MODE_ENUM" value="unset" />
+ <parameter name="PHY_QDR2_USER_DATA_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_QDR2_USER_DATA_OUT_MODE_ENUM" value="unset" />
+ <parameter name="PHY_QDR2_USER_PERIODIC_OCT_RECAL_ENUM">PERIODIC_OCT_RECAL_AUTO</parameter>
+ <parameter name="PHY_QDR2_USER_PING_PONG_EN" value="false" />
+ <parameter name="PHY_QDR2_USER_PLL_REF_CLK_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_QDR2_USER_REF_CLK_FREQ_MHZ" value="-1.0" />
+ <parameter name="PHY_QDR2_USER_RZQ_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_QDR2_USER_STARTING_VREFIN" value="70.0" />
+ <parameter name="PHY_QDR4_CONFIG_ENUM">CONFIG_PHY_AND_SOFT_CTRL</parameter>
+ <parameter name="PHY_QDR4_CORE_CLKS_SHARING_ENUM">CORE_CLKS_SHARING_DISABLED</parameter>
+ <parameter name="PHY_QDR4_CORE_CLKS_SHARING_EXPOSE_SLAVE_OUT" value="false" />
+ <parameter name="PHY_QDR4_DEFAULT_IO" value="true" />
+ <parameter name="PHY_QDR4_DEFAULT_REF_CLK_FREQ" value="true" />
+ <parameter name="PHY_QDR4_HPS_ENABLE_EARLY_RELEASE" value="false" />
+ <parameter name="PHY_QDR4_IO_VOLTAGE" value="1.2" />
+ <parameter name="PHY_QDR4_MEM_CLK_FREQ_MHZ" value="1066.667" />
+ <parameter name="PHY_QDR4_RATE_ENUM" value="RATE_QUARTER" />
+ <parameter name="PHY_QDR4_REF_CLK_JITTER_PS" value="10.0" />
+ <parameter name="PHY_QDR4_USER_AC_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_QDR4_USER_AC_MODE_ENUM" value="unset" />
+ <parameter name="PHY_QDR4_USER_AC_SLEW_RATE_ENUM" value="SLEW_RATE_FAST" />
+ <parameter name="PHY_QDR4_USER_AUTO_STARTING_VREFIN_EN" value="true" />
+ <parameter name="PHY_QDR4_USER_CK_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_QDR4_USER_CK_MODE_ENUM" value="unset" />
+ <parameter name="PHY_QDR4_USER_CK_SLEW_RATE_ENUM" value="SLEW_RATE_FAST" />
+ <parameter name="PHY_QDR4_USER_DATA_IN_MODE_ENUM" value="unset" />
+ <parameter name="PHY_QDR4_USER_DATA_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_QDR4_USER_DATA_OUT_MODE_ENUM" value="unset" />
+ <parameter name="PHY_QDR4_USER_PERIODIC_OCT_RECAL_ENUM">PERIODIC_OCT_RECAL_AUTO</parameter>
+ <parameter name="PHY_QDR4_USER_PING_PONG_EN" value="false" />
+ <parameter name="PHY_QDR4_USER_PLL_REF_CLK_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_QDR4_USER_REF_CLK_FREQ_MHZ" value="-1.0" />
+ <parameter name="PHY_QDR4_USER_RZQ_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_QDR4_USER_STARTING_VREFIN" value="70.0" />
+ <parameter name="PHY_RLD2_CONFIG_ENUM">CONFIG_PHY_AND_SOFT_CTRL</parameter>
+ <parameter name="PHY_RLD2_CORE_CLKS_SHARING_ENUM">CORE_CLKS_SHARING_DISABLED</parameter>
+ <parameter name="PHY_RLD2_CORE_CLKS_SHARING_EXPOSE_SLAVE_OUT" value="false" />
+ <parameter name="PHY_RLD2_DEFAULT_IO" value="true" />
+ <parameter name="PHY_RLD2_DEFAULT_REF_CLK_FREQ" value="true" />
+ <parameter name="PHY_RLD2_HPS_ENABLE_EARLY_RELEASE" value="false" />
+ <parameter name="PHY_RLD2_IO_VOLTAGE" value="1.8" />
+ <parameter name="PHY_RLD2_MEM_CLK_FREQ_MHZ" value="533.333" />
+ <parameter name="PHY_RLD2_RATE_ENUM" value="RATE_HALF" />
+ <parameter name="PHY_RLD2_REF_CLK_JITTER_PS" value="10.0" />
+ <parameter name="PHY_RLD2_USER_AC_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_RLD2_USER_AC_MODE_ENUM" value="unset" />
+ <parameter name="PHY_RLD2_USER_AC_SLEW_RATE_ENUM" value="SLEW_RATE_FAST" />
+ <parameter name="PHY_RLD2_USER_AUTO_STARTING_VREFIN_EN" value="true" />
+ <parameter name="PHY_RLD2_USER_CK_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_RLD2_USER_CK_MODE_ENUM" value="unset" />
+ <parameter name="PHY_RLD2_USER_CK_SLEW_RATE_ENUM" value="SLEW_RATE_FAST" />
+ <parameter name="PHY_RLD2_USER_DATA_IN_MODE_ENUM" value="unset" />
+ <parameter name="PHY_RLD2_USER_DATA_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_RLD2_USER_DATA_OUT_MODE_ENUM" value="unset" />
+ <parameter name="PHY_RLD2_USER_PERIODIC_OCT_RECAL_ENUM">PERIODIC_OCT_RECAL_AUTO</parameter>
+ <parameter name="PHY_RLD2_USER_PING_PONG_EN" value="false" />
+ <parameter name="PHY_RLD2_USER_PLL_REF_CLK_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_RLD2_USER_REF_CLK_FREQ_MHZ" value="-1.0" />
+ <parameter name="PHY_RLD2_USER_RZQ_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_RLD2_USER_STARTING_VREFIN" value="70.0" />
+ <parameter name="PHY_RLD3_CONFIG_ENUM" value="CONFIG_PHY_ONLY" />
+ <parameter name="PHY_RLD3_CORE_CLKS_SHARING_ENUM">CORE_CLKS_SHARING_DISABLED</parameter>
+ <parameter name="PHY_RLD3_CORE_CLKS_SHARING_EXPOSE_SLAVE_OUT" value="false" />
+ <parameter name="PHY_RLD3_DEFAULT_IO" value="true" />
+ <parameter name="PHY_RLD3_DEFAULT_REF_CLK_FREQ" value="true" />
+ <parameter name="PHY_RLD3_HPS_ENABLE_EARLY_RELEASE" value="false" />
+ <parameter name="PHY_RLD3_IO_VOLTAGE" value="1.2" />
+ <parameter name="PHY_RLD3_MEM_CLK_FREQ_MHZ" value="1066.667" />
+ <parameter name="PHY_RLD3_RATE_ENUM" value="RATE_QUARTER" />
+ <parameter name="PHY_RLD3_REF_CLK_JITTER_PS" value="10.0" />
+ <parameter name="PHY_RLD3_USER_AC_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_RLD3_USER_AC_MODE_ENUM" value="unset" />
+ <parameter name="PHY_RLD3_USER_AC_SLEW_RATE_ENUM" value="SLEW_RATE_FAST" />
+ <parameter name="PHY_RLD3_USER_AUTO_STARTING_VREFIN_EN" value="true" />
+ <parameter name="PHY_RLD3_USER_CK_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_RLD3_USER_CK_MODE_ENUM" value="unset" />
+ <parameter name="PHY_RLD3_USER_CK_SLEW_RATE_ENUM" value="SLEW_RATE_FAST" />
+ <parameter name="PHY_RLD3_USER_DATA_IN_MODE_ENUM" value="unset" />
+ <parameter name="PHY_RLD3_USER_DATA_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_RLD3_USER_DATA_OUT_MODE_ENUM" value="unset" />
+ <parameter name="PHY_RLD3_USER_PERIODIC_OCT_RECAL_ENUM">PERIODIC_OCT_RECAL_AUTO</parameter>
+ <parameter name="PHY_RLD3_USER_PING_PONG_EN" value="false" />
+ <parameter name="PHY_RLD3_USER_PLL_REF_CLK_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_RLD3_USER_REF_CLK_FREQ_MHZ" value="-1.0" />
+ <parameter name="PHY_RLD3_USER_RZQ_IO_STD_ENUM" value="unset" />
+ <parameter name="PHY_RLD3_USER_STARTING_VREFIN" value="70.0" />
+ <parameter name="PLL_ADD_EXTRA_CLKS" value="false" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_DUTY_CYCLE_0" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_DUTY_CYCLE_1" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_DUTY_CYCLE_2" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_DUTY_CYCLE_3" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_DUTY_CYCLE_4" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_DUTY_CYCLE_5" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_DUTY_CYCLE_6" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_DUTY_CYCLE_7" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_DUTY_CYCLE_8" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_DUTY_CYCLE_GUI_0" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_DUTY_CYCLE_GUI_1" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_DUTY_CYCLE_GUI_2" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_DUTY_CYCLE_GUI_3" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_DUTY_CYCLE_GUI_4" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_DUTY_CYCLE_GUI_5" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_DUTY_CYCLE_GUI_6" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_DUTY_CYCLE_GUI_7" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_DUTY_CYCLE_GUI_8" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_FREQ_MHZ_GUI_0" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_FREQ_MHZ_GUI_1" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_FREQ_MHZ_GUI_2" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_FREQ_MHZ_GUI_3" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_FREQ_MHZ_GUI_4" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_FREQ_MHZ_GUI_5" value="100.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_FREQ_MHZ_GUI_6" value="100.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_FREQ_MHZ_GUI_7" value="100.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_FREQ_MHZ_GUI_8" value="100.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_PHASE_DEG_GUI_0" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_PHASE_DEG_GUI_1" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_PHASE_DEG_GUI_2" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_PHASE_DEG_GUI_3" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_PHASE_DEG_GUI_4" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_PHASE_DEG_GUI_5" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_PHASE_DEG_GUI_6" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_PHASE_DEG_GUI_7" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_PHASE_DEG_GUI_8" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_PHASE_PS_GUI_0" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_PHASE_PS_GUI_1" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_PHASE_PS_GUI_2" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_PHASE_PS_GUI_3" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_PHASE_PS_GUI_4" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_PHASE_PS_GUI_5" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_PHASE_PS_GUI_6" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_PHASE_PS_GUI_7" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_ACTUAL_PHASE_PS_GUI_8" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_DUTY_CYCLE_GUI_0" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_DUTY_CYCLE_GUI_1" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_DUTY_CYCLE_GUI_2" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_DUTY_CYCLE_GUI_3" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_DUTY_CYCLE_GUI_4" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_DUTY_CYCLE_GUI_5" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_DUTY_CYCLE_GUI_6" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_DUTY_CYCLE_GUI_7" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_DUTY_CYCLE_GUI_8" value="50.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_FREQ_MHZ_GUI_0" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_FREQ_MHZ_GUI_1" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_FREQ_MHZ_GUI_2" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_FREQ_MHZ_GUI_3" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_FREQ_MHZ_GUI_4" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_FREQ_MHZ_GUI_5" value="100.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_FREQ_MHZ_GUI_6" value="100.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_FREQ_MHZ_GUI_7" value="100.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_FREQ_MHZ_GUI_8" value="100.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_PHASE_GUI_0" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_PHASE_GUI_1" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_PHASE_GUI_2" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_PHASE_GUI_3" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_PHASE_GUI_4" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_PHASE_GUI_5" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_PHASE_GUI_6" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_PHASE_GUI_7" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_DESIRED_PHASE_GUI_8" value="0.0" />
+ <parameter name="PLL_EXTRA_CLK_PHASE_SHIFT_UNIT_GUI_0" value="0" />
+ <parameter name="PLL_EXTRA_CLK_PHASE_SHIFT_UNIT_GUI_1" value="0" />
+ <parameter name="PLL_EXTRA_CLK_PHASE_SHIFT_UNIT_GUI_2" value="0" />
+ <parameter name="PLL_EXTRA_CLK_PHASE_SHIFT_UNIT_GUI_3" value="0" />
+ <parameter name="PLL_EXTRA_CLK_PHASE_SHIFT_UNIT_GUI_4" value="0" />
+ <parameter name="PLL_EXTRA_CLK_PHASE_SHIFT_UNIT_GUI_5" value="0" />
+ <parameter name="PLL_EXTRA_CLK_PHASE_SHIFT_UNIT_GUI_6" value="0" />
+ <parameter name="PLL_EXTRA_CLK_PHASE_SHIFT_UNIT_GUI_7" value="0" />
+ <parameter name="PLL_EXTRA_CLK_PHASE_SHIFT_UNIT_GUI_8" value="0" />
+ <parameter name="PLL_USER_NUM_OF_EXTRA_CLKS" value="0" />
+ <parameter name="PROTOCOL_ENUM" value="PROTOCOL_DDR4" />
+ <parameter name="SHORT_QSYS_INTERFACE_NAMES" value="true" />
+ <parameter name="SYS_INFO_DEVICE" value="10AX115U2F45E1SG" />
+ <parameter name="SYS_INFO_DEVICE_DIE_REVISIONS" value="" />
+ <parameter name="SYS_INFO_DEVICE_FAMILY" value="Arria 10" />
+ <parameter name="SYS_INFO_DEVICE_SPEEDGRADE" value="1" />
+ <parameter name="SYS_INFO_UNIQUE_ID">ip_arria10_e1sg_ddr4_16g_1600_emif_0</parameter>
+ <parameter name="TRAIT_SUPPORTS_VID" value="0" />
+ </module>
+ <interconnectRequirement for="$system" name="qsys_mm.clockCrossingAdapter" value="HANDSHAKE" />
+ <interconnectRequirement for="$system" name="qsys_mm.enableEccProtection" value="FALSE" />
+ <interconnectRequirement for="$system" name="qsys_mm.insertDefaultSlave" value="FALSE" />
+ <interconnectRequirement for="$system" name="qsys_mm.maxAdditionalLatency" value="1" />
+</system>