diff --git a/boards/uniboard1/designs/unb1_minimal/revisions/unb1_minimal_sopc/unb1_minimal_sopc.system.yaml b/boards/uniboard1/designs/unb1_minimal/revisions/unb1_minimal_sopc/unb1_minimal_sopc.system.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..d6ee3b63770c2411d856bd2c111f507784a6a7e5
--- /dev/null
+++ b/boards/uniboard1/designs/unb1_minimal/revisions/unb1_minimal_sopc/unb1_minimal_sopc.system.yaml
@@ -0,0 +1,72 @@
+schema_name : args
+schema_version: 1.0
+schema_type : fpga
+
+hdl_library_name: unb1_minimal_sopc
+
+fpga_name : unb1_minimal_sopc
+fpga_description: |
+ "unb1_minimal system for sopc"
+
+peripherals:
+ - peripheral_name: rom_system_info
+ subsystem_name : ''
+ slave_port_names:
+ - rom_system_info
+ parameters:
+ - { name: lock_base_address, value: 0x1000 }
+
+ - peripheral_name: reg_system_info
+
+ subsystem_name : ''
+ slave_port_names:
+ - pio_system_info
+ parameters:
+ - { name: lock_base_address, value: 0x0 }
+
+ - peripheral_name: ctrl_unb1_board
+ subsystem_name : ''
+ slave_port_names:
+ - pio_wdi
+
+ - peripheral_name: unb1_board_wdi_reg
+ subsystem_name : ''
+ slave_port_names:
+ - reg_wdi
+
+ - peripheral_name: eth1g
+ subsystem_name : ''
+ slave_port_names:
+ - avs_eth_0_mms_tse
+ - avs_eth_0_mms_reg
+ - avs_eth_0_mms_ram
+
+ - peripheral_name: ppsh
+ subsystem_name : ''
+ slave_port_names:
+ - pio_pps
+
+ - peripheral_name: epcs_reg
+ subsystem_name : ''
+ slave_port_names:
+ - reg_epcs
+ - reg_mmdp_ctrl
+ - reg_mmdp_data
+ - reg_dpmm_ctrl
+ - reg_dpmm_data
+ parameters:
+ - { name : g_sim_flash_model, value: FALSE }
+
+ - peripheral_name: remu_reg
+ subsystem_name : ''
+ slave_port_names:
+ - reg_remu
+
+ - peripheral_name: unb1_board_sens_reg
+ subsystem_name : ''
+ slave_port_names:
+ - reg_unb_sens
+ parameters:
+ - { name : g_sim, value: FALSE }
+ - { name : g_clk_freq, value: 125E6 }
+ - { name : g_temp_high, value: 85 }
diff --git a/boards/uniboard1/libraries/unb1_board/unb1_board.peripheral.yaml b/boards/uniboard1/libraries/unb1_board/unb1_board.peripheral.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..1dc9ae0ba5d39c6614431d04a5b0a2bbab1ebd83
--- /dev/null
+++ b/boards/uniboard1/libraries/unb1_board/unb1_board.peripheral.yaml
@@ -0,0 +1,182 @@
+schema_name : args
+schema_version: 1.0
+schema_type : peripheral
+
+hdl_library_name : unb1_board
+hdl_library_description: " This is the description for the unb1_board package "
+
+peripherals:
+ -
+ peripheral_name: rom_system_info
+ slave_ports:
+ -
+ # rom_system_info
+ slave_prefix : WORK
+ slave_name : ROM_SYSTEM_INFO
+ slave_postfix: REG
+ slave_type : REG
+ fields:
+ -
+ field_name : field_rom_info
+ access_mode : RO
+ address_offset: 0x0
+ number_of_fields: 1024
+ field_description: |
+ "address place for rom_system_info"
+ slave_description: " rom_info "
+
+ peripheral_description: |
+ " settings for rom_system_info register "
+ -
+ peripheral_name: reg_system_info
+ slave_ports:
+ -
+ # reg_system_info
+ slave_prefix : WORK
+ slave_name : REG_SYSTEM_INFO
+ slave_postfix: REG
+ slave_type : REG
+ fields:
+ -
+ field_name : field_reg_info
+ access_mode : RO
+ address_offset: 0x0
+ number_of_fields: 31
+ field_description: |
+ "address place for reg_system_info"
+ slave_description: " reg_info "
+
+ peripheral_description: |
+ " settings for reg_system_info register "
+
+ # peripheral, unb1_board_wdi_reg
+ -
+ peripheral_name: ctrl_unb1_board
+
+ slave_ports:
+ -
+ # actual hdl name: unb1_board_wdi_reg
+ slave_prefix : UNB1_BOARD
+ slave_name : PIO_WDI
+ slave_postfix: REG
+ slave_type : REG
+ fields:
+ -
+ field_name : nios_reset
+ access_mode : WO
+ address_offset : 0x0
+ number_of_fields: 4
+ field_description: " Reset done by nios "
+
+ slave_description: "Reset register, for nios "
+
+ peripheral_description: " "
+
+ # peripheral, unb1_board_wdi_reg
+ -
+ peripheral_name: unb1_board_wdi_reg
+
+ slave_ports:
+ -
+ # actual hdl name: unb1_board_wdi_reg
+ slave_prefix : UNB1_BOARD
+ slave_name : WDI
+ slave_postfix: REG
+ slave_type : REG
+ fields:
+ -
+ field_name : reset_word
+ access_mode : WO
+ address_offset: 0x0
+ field_description: " Only the value 0xB007FAC7 'Boot factory' will result in a reset "
+
+ slave_description: "Reset register, if the right value is provided the factory image will be reloaded "
+
+ peripheral_description: " "
+
+ # periheral, unb1_board_sens
+ -
+ peripheral_name: unb1_board_sens_reg
+
+ parameters:
+ - { name: g_sim, value: FALSE }
+ - { name: g_clk_freq, value: c_unb1_board_mm_clk_freq_125M }
+ - { name: g_temp_high, value: 85 }
+
+ slave_ports:
+ -
+ # actual hdl name: reg_unb1_sens
+ slave_prefix : UNB1_BOARD
+ slave_name : SENS
+ slave_postfix: REG
+ slave_type : REG
+ fields:
+ -
+ field_name : sens_data
+ width : 8
+ access_mode : RO
+ address_offset: 0x0
+ number_of_fields: 4
+ field_description: |
+ " data array with sens data
+ 0x0 = fpga temperature in degrees (two's complement)
+ 0x1 = eth_temp temperature in degrees (two's complement)
+ 0x2 = hot_swap_v_sens
+ 0x3 = hot_swap_v_source"
+
+ -
+ field_name : sens_err
+ width : 1
+ access_mode : RO
+ address_offset: 0x4
+ radix : unsigned
+ field_description: ""
+
+ -
+ field_name : temp_high
+ width : 7
+ address_offset: 0x5
+ reset_value : g_temp_high
+ software_value: g_temp_high
+ field_description: ""
+
+ slave_description: " "
+
+ peripheral_description: |
+ "
+ +-----------------------------------------------------------------------------+
+ |31 (byte3) 24|23 (byte2) 16|15 (byte1) 8|7 (byte0) 0| wi |
+ |-----------------------------------------------------------------------|-----|
+ | xxx fpga_temp = sens_data[0][7:0]| 0 |
+ |-----------------------------------------------------------------------|-----|
+ | xxx eth_temp = sens_data[1][7:0]| 1 |
+ |-----------------------------------------------------------------------|-----|
+ | xxx hot_swap_v_sense = sens_data[2][7:0]| 2 |
+ |-----------------------------------------------------------------------|-----|
+ | xxx hot_swap_v_source = sens_data[3][7:0]| 3 |
+ |-----------------------------------------------------------------------|-----|
+ | xxx sens_err[0]| 4 |
+ |-----------------------------------------------------------------------|-----|
+ | xxx temp_high[6:0]| 5 |
+ +-----------------------------------------------------------------------------+
+ * The fpga_temp and eth_temp are in degrees (two's complement)
+ * The hot swap voltages depend on:
+ . From i2c_dev_ltc4260_pkg:
+ LTC4260_V_UNIT_SENSE = 0.0003 -- 0.3 mV over Rs for current sense
+ LTC4260_V_UNIT_SOURCE = 0.4 -- 400 mV supply voltage (e.g +48 V)
+ LTC4260_V_UNIT_ADIN = 0.01 -- 10 mV ADC
+
+ . From UniBoard unb_sensors.h:
+ SENS_HOT_SWAP_R_SENSE = 0.005 -- R sense on UniBoard is 5 mOhm (~= 10 mOhm // 10 mOhm)
+ SENS_HOT_SWAP_I_UNIT_SENSE = LTC4260_V_UNIT_SENSE / SENS_HOT_SWAP_R_SENSE
+ SENS_HOT_SWAP_V_UNIT_SOURCE = LTC4260_V_UNIT_SOURCE
+
+ ==>
+ Via all FN and BN:
+ 0 = FPGA temperature = TInt8(fpga_temp)
+ Only via BN3:
+ 1 = UniBoard ETH PHY temperature = TInt8(eth_temp)
+ 2 = UniBoard hot swap supply current = hot_swap_v_sense * SENS_HOT_SWAP_I_UNIT_SENSE
+ 3 = UniBoard hot swap supply voltage = hot_swap_v_source * SENS_HOT_SWAP_V_UNIT_SOURCE
+ 4 = I2C error status for BN3 sensors access only, 0 = ok"
+
diff --git a/libraries/base/diag/diag.peripheral.yaml b/libraries/base/diag/diag.peripheral.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..65d1b28189256ecc88e25db0154d238a8e09225d
--- /dev/null
+++ b/libraries/base/diag/diag.peripheral.yaml
@@ -0,0 +1,258 @@
+schema_name : args
+schema_version: 1.0
+schema_type : peripheral
+
+hdl_library_name : diag
+hdl_library_description: " This is the description for the bf package "
+
+peripherals:
+ -
+ peripheral_name: diag_block_gen
+
+ parameters:
+ - { name: g_nof_streams, value: 1 }
+ - { name: g_buf_dat_w , value: 32 }
+ - { name: g_buf_addr_w , value: 7 }
+
+ slave_ports:
+ -
+ # actual hdl name: reg_diag_bg
+ slave_prefix : DIAG
+ slave_name : BG
+ slave_postfix: REG
+ slave_type : REG
+ fields:
+ -
+ field_name : Enable
+ width : 2
+ address_offset: 0x0
+ field_description: |
+ "Bit 0: enable the block generator Bit 1: enable the blok generator on PPS"
+ -
+ field_name : Samples_per_packet
+ width : 16
+ address_offset: 0x1
+ reset_value : 256
+ field_description: |
+ "This REG specifies the number samples in a packet"
+ -
+ field_name : Blocks_per_sync
+ width : 16
+ address_offset: 0x2
+ reset_value : 781250
+ field_description: |
+ "This REG specifies the number of packets in a sync period"
+ -
+ field_name : Gapsize
+ width : 16
+ address_offset: 0x3
+ reset_value : 80
+ field_description: |
+ "This REG specifies the gap in number of clock cycles between two consecutive packets"
+ -
+ field_name : Mem_low_address
+ width : 8
+ address_offset: 0x4
+ field_description: |
+ "This REG specifies the starting address for reading from the waveform memory"
+ -
+ field_name : Mem_high_address
+ width : 8
+ address_offset: 0x5
+ field_description: |
+ "This REG specifies the last address to be read when from the waveform memory"
+ -
+ field_name : BSN_init_low
+ address_offset: 0x6
+ field_description: |
+ "This REG specifies the lower(LSB) 32 bits [31:0] of the initialization BSN"
+ -
+ field_name : BSN_init_high
+ address_offset: 0x7
+ field_description: |
+ "This REG specifies the higher(MSB) 32 bits [63:32] of the initialization BSN"
+ -
+ # actual hdl name: ram_diag_bg
+ slave_prefix : DIAG
+ slave_name : BG
+ slave_postfix: RAM
+ number_of_slaves: g_nof_streams
+ slave_type : RAM
+ fields:
+ -
+ field_name: diag_bg
+ width: g_buf_dat_w
+ number_of_fields: 2**g_buf_addr_w
+ field_description : |
+ "Contains the Waveform data for the data-streams to be send"
+ peripheral_description: |
+ "Block generator"
+ -
+ peripheral_name: diag_data_buffer
+
+ parameters:
+ - { name: g_nof_streams , value: 1 }
+ - { name: g_data_w , value: 32 }
+ - { name: g_buf_nof_data, value: 1024 }
+
+ slave_ports:
+ -
+ # actual hdl name: reg_diag_data_buffer
+ slave_prefix : DIAG
+ slave_name : DATA_BUFFER
+ slave_postfix: REG
+ slave_type : REG
+ fields:
+ -
+ field_name : Sync_cnt
+ access_mode : RO
+ address_offset: 0x0
+ field_description: |
+ "Sync_cnt contains the nof times the buffer (ST) has received a sync pulse since the last MM read
+ (cleared when the last data word from the buffer is read)"
+ -
+ field_name : Word_cnt
+ access_mode : RO
+ address_offset: 0x1
+ field_description: |
+ "Word_cnt indicates the number of word currently (ST) written in the buffer. Cleared on (ST) re-write of buffer."
+ -
+ field_name : Valid_cnt_arm_ena
+ address_offset: 0x2
+ field_description: |
+ "Valid_cnt contains the number of valid cycles since the last sync pulse. Cleared on every sync pulse.
+ Arm_enable: Write to this REG to arm the system.
+ After the system is armed the next syn pulse will trigger the acquisition of data."
+ -
+ field_name : Reg_sync_delay
+ address_offset: 0x3
+ field_description: |
+ "Reg_sync_delay contains the number of valid cycles to delay/wait after an armed-syncpulse,
+ before the data is written to the databuffer."
+ -
+ field_name : Version
+ access_mode : RO
+ address_offset: 0x7
+ field_description: |
+ "Version contains the version number of the databuffer peripheral."
+ slave_description: ""
+ -
+ # actual hdl name: ram_diag_data_buffer
+ slave_prefix : DIAG
+ slave_name : DATA_BUFFER
+ slave_postfix: RAM
+ number_of_slaves: g_nof_streams
+ slave_type : RAM
+ fields:
+ -
+ field_name : ram
+ width : g_data_w
+ number_of_fields: g_buf_nof_data
+ field_description: |
+ "Contains the data that is being captured."
+ slave_description: ""
+
+ peripheral_description: |
+ "Peripheral diag_data_buffer
+
+ Memory map RAM_DIAG_DATA_BUFFER
+
+ If there is only one instance then the RAM name is RAM_DIAG_DATA_BUFFER, else it
+ gets an instanceName as post fix so RAM_DIAG_DATA_BUFFER_<instanceName|.
+
+ The diag_data_buffer can store multiple streams in parallel. For example
+ 1024 data words for 16 streams the memory map becomes: 16
+
+
+ streamNr = 0:
+ +------------------------------------------------------------+
+ | byte 3 | byte 2 | byte 1 | byte 0 | wi |
+ |------------------------------------------------------------|
+ | data_0[31:0] | 0 |
+ | data_1[31:0] | 1 |
+ | ... | .. |
+ | data_1023[31:0] | 1023 |
+ +------------------------------------------------------------+
+
+
+ streamNr = 1:
+ +------------------------------------------------------------+
+ | byte 3 | byte 2 | byte 1 | byte 0 | wi |
+ |------------------------------------------------------------|
+ | data_0[31:0] | 1024 |
+ | data_1[31:0] | 1025 |
+ | ... | .. |
+ | data_1023[31:0] | 2047 |
+ +------------------------------------------------------------+
+
+
+ streamNr = 15:
+ +------------------------------------------------------------+
+ | byte 3 | byte 2 | byte 1 | byte 0 | wi |
+ |------------------------------------------------------------|
+ | data_0[31:0] | 15360 |
+ | data_1[31:0] | 15361 |
+ | ... | .. |
+ | data_1023[31:0] | 16383 |
+ +------------------------------------------------------------+
+
+
+ Remarks:
+ - The data buffer stores valid data samples until it is full.
+ - The data buffer fills again after an external sync pulse or after the
+ last data word was read via the MM bus, dependend on whether the generic
+ g_use_in_sync is TRUE or FALSE in diag_data_buffer.vhd.
+ - The actual data width depends on the generic g_data_w in
+ diag_data_buffer.vhd. The value of unused MSBits is undefined.
+
+
+ Memory map REG_DIAG_DATA_BUFFER (one for each stream like the RAM above)
+
+ +----------------------------------------------------------------------------+
+ | byte 3 | byte 2 | byte 1 | byte 0 | wi |
+ |----------------------------------------------------------------------------|
+ | sync_cnt[31:0] | 0 RO (Version 0 and 1) |
+ | word_cnt[31:0] | 1 RO (Version 0 and 1) |
+ | R = valid_cnt[31:0] W = arm_enable | 2 RW (Version 1 only) |
+ | reg_sync_delay[31:0] | 3 RW (Version 1 only) |
+ | RESERVED | 4 (Version 1 only) |
+ | RESERVED | 5 (Version 1 only) |
+ | RESERVED | 6 (Version 1 only) |
+ | version[31:0] | 7 RO (Version 1 only) |
+ +----------------------------------------------------------------------------+
+
+
+ There are 3 access_modes of operation of the data_buffer.
+ Version 0 supports access_Mode 1 and access_Mode 2
+ Version 1 supports access_Mode 1, access_Mode 2 and access_Mode 3
+
+ (1) NON-SYNC access_MODE: g_use_in_sync = FALSE
+ In this access_mode the first g_nof_data valid data input words are stored in the
+ data buffer. A new set of data will be stored when the last word is read
+ from the buffer via the MM interface.
+
+ (2) SYNC-access_MODE: g_use_in_sync = TRUE and reg_sync_delay = 0
+ On every received sync pulse a number of g_nof_data valid words are written
+ to the databuffer. Data will be overwritten on every new sync pulse. It is
+ up to the user to read out the data in time in between two sync pulses
+
+ (3) ARM-access_MODE: g_use_in_sync = TRUE and reg_sync_delay | 0
+ First the reg_sync_delay should be written with a desired delay value. Then
+ the arm REG must be written. After being armed the databuffer will wait
+ for the first sync pulse to arrive. When it has arrived it will wait for
+ reg_sync_delay valid cycles before g_nof_data valid words are written to the
+ databuffer. The data can then be read out through the MM interface. New data
+ will only be written if the databuffer is being armed again.
+
+ - Sync_cnt contains the nof times the buffer (ST) has received a sync pulse
+ since the last MM read (cleared when the last data word from the buffer is
+ read);
+ - Word_cnt indicates the number of word currently (ST) written in the buffer.
+ Cleared on (ST) re-write of buffer.
+ - valid_cnt contains the number of valid cycles since the last sync pulse.
+ Cleared on every sync pulse.
+ - arm_enable. Write to this REG to arm the system. After the system is
+ armed the next syn pulse will truigger the acquisition of data.
+ - reg_sync_delay contains the number of valid cycles to delay/wait after an armed-syncpulse,
+ before the data is written to the databuffer.
+ - version contains the version number of the databuffer peripheral."
diff --git a/libraries/base/dp/dp.peripheral.yaml b/libraries/base/dp/dp.peripheral.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..1c6e7a3bb2e6fcde98cd871db2aad69062201d07
--- /dev/null
+++ b/libraries/base/dp/dp.peripheral.yaml
@@ -0,0 +1,69 @@
+schema_name : args
+schema_version: 1.0
+schema_type : peripheral
+
+hdl_library_name : dp
+hdl_library_description: " This is the description for the dp package "
+
+peripherals:
+ -
+ peripheral_name: dp_bsn_align
+
+ parameters:
+ - { name: g_nof_input, value : 2 }
+
+ slave_ports:
+ -
+ # actual hdl name: reg_dp_bsn_align
+ slave_prefix : DP
+ slave_name : BSN_ALIGN
+ slave_postfix: REG
+ number_of_slaves: g_nof_input
+ slave_type : REG
+ fields:
+ -
+ field_name : Enable
+ width : 1
+ address_offset : 0x0
+ field_description: |
+ "Input enable register for input 0. If set to 0 the input is discarded from alignment.
+ If set to 1 the corresopnding input is taken into account."
+ slave_discription: " "
+
+ peripheral_description: "This is the BSN aligner"
+
+ -
+ peripheral_name: dp_fifo_fill
+ parameters:
+ - { name : g_nof_streams, value: 3 }
+
+ slave_ports:
+ -
+ # actual hdl name: reg_dp_fifo_fill
+ slave_prefix : DP
+ slave_name : FIFO_FILL
+ slave_postfix: REG
+ number_of_slaves: g_nof_streams
+ slave_type : REG
+ fields:
+ -
+ field_name : fifo_used_words
+ access_mode : RO
+ address_offset : 0x0
+ field_description: "Register reflects the currently used nof words on the fifo."
+ -
+ field_name : fifo_status
+ width : 2
+ access_mode : RO
+ address_offset : 0x1
+ field_description: "Bit 0: fifo_read_empty Bit 1: fifo_wr_full."
+ -
+ field_name : max_fifo_used_words
+ access_mode : RO
+ address_offset : 0x2
+ field_description: |
+ "Register contains the maximum number of words that have been in the fifo.
+ Will be cleared after it has been read."
+ slave_discription: ""
+
+ peripheral_description: "This is the MM slave version of the dp_fifo_fill component."
diff --git a/libraries/dsp/bf/bf.peripheral.yaml b/libraries/dsp/bf/bf.peripheral.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..b4359c3404086da5bf4daf68dd0b665f57608799
--- /dev/null
+++ b/libraries/dsp/bf/bf.peripheral.yaml
@@ -0,0 +1,94 @@
+schema_name : args
+schema_version: 1.0
+schema_type : peripheral
+
+hdl_library_name : bf
+hdl_library_description: " This is the description for the bf package "
+
+peripherals:
+ - peripheral_name: bf_unit
+
+ parameters:
+ - { name: g_bf.in_weights_w , value: 16 }
+ - { name: g_bf.nof_weights , value: 256 }
+ - { name: g_bf.nof_signal_paths , value: 64 }
+ - { name: g_bf.nof_subbands , value: 24 }
+ - { name: g_bf.nof_input_streams , value: 16 }
+ - { name: c_nof_signal_paths_per_stream, value: g_bf.nof_signal_paths / g_bf.nof_input_streams }
+
+ slave_ports:
+ -
+ # ram_bf_weights
+ slave_prefix : BF
+ slave_name : WEIGHTS
+ slave_postfix: RAM
+ number_of_slaves: g_bf.nof_weights
+ slave_type: RAM
+ fields:
+ -
+ field_name : bf_weights
+ width : g_bf.in_weights_w * c_nof_complex
+
+ number_of_fields: g_bf.nof_signal_paths
+ field_description: |
+ "Contains the weights.
+ The real and the imaginary parts are concatenated: W_real in Lower part. W_imag in Higher part."
+ slave_discription: >
+ " "
+
+ -
+ # ram_ss_ss_wide
+ slave_prefix : BF
+ slave_name : SS_SS_WIDE
+ slave_postfix: RAM
+ number_of_slaves: g_bf.nof_weights
+ slave_type: RAM
+ fields:
+ -
+ field_name : ss_ss_wide
+ width : 32
+ number_of_fields: g_bf.nof_subbands * g_bf.nof_input_streams * c_nof_signal_paths_per_stream # 16*4=64, nof_input_streams*nof_signal_paths_per_stream
+ field_description: |
+ "Contains the addresses to select from the stored subbands."
+ slave_discription: >
+ " "
+
+ -
+ # ram_st_sst_bf
+ slave_prefix : BF
+ slave_name : ST_SST
+ slave_postfix: RAM
+ number_of_slaves: g_bf.nof_weights
+ slave_type: RAM
+ fields:
+ -
+ field_name : st_sst_bf
+ width : 56
+ number_of_fields: 512
+ access_mode : RO
+ field_description: |
+ "Contains the weights.
+ The real and the imaginary parts are concatenated: W_real in Lower part. W_imag in Higher part."
+ slave_discription: >
+
+ -
+ # reg_st_sst_bf
+ slave_prefix : BF
+ slave_name : ST_SST
+ slave_postfix: REG
+ number_of_slaves: 1
+ slave_type: REG
+ fields:
+ -
+ field_name : treshold
+ address_offset: 0x0
+ field_description : |
+ "When the treshold register is set to 0 the statistics will be auto-correlations.
+ In case the treshold register is set to a non-zero value, it allows to create a sample & hold function
+ for the a-input of the multiplier.
+ The a-input of the multiplier is updated every treshold clockcycle. Thereby cross statistics can be created."
+ slave_discription: >
+ " "
+
+ peripheral_description: |
+ "This is the beamformer unit"
diff --git a/libraries/dsp/fringe_stop/fringe_stop.peripheral.yaml b/libraries/dsp/fringe_stop/fringe_stop.peripheral.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..a48573c686828c7ff18e53b0a8e3c6cd8e66bab1
--- /dev/null
+++ b/libraries/dsp/fringe_stop/fringe_stop.peripheral.yaml
@@ -0,0 +1,121 @@
+schema_name : args
+schema_version: 1.0
+schema_type : peripheral
+
+hdl_library_name : fringe_stop
+hdl_library_description: " This is the description for the finge_stop library "
+
+peripherals:
+ -
+ peripheral_name: fringe_stop_unit
+
+ parameters:
+ - { name: g_nof_channels, value: 256 }
+ - { name: g_fs_offset_w , value: 10 }
+ - { name: g_fs_step_w , value: 17 }
+
+ slave_ports:
+ -
+ # actual hdl name: ram_fringe_stop_step
+ slave_prefix : FRINGE_STOP
+ slave_name : STEP
+ slave_postfix: RAM
+ slave_type : RAM
+ fields:
+ -
+ field_name : fringe_stop_step
+ width: g_fs_step_w
+ number_of_fields: g_nof_channels
+ field_description: |
+ "Contains the step size for all nof_channels channels."
+ slave_discription: " "
+
+ -
+ # actual hdl name: fringe_stop_offset
+ slave_prefix : FRINGE_STOP
+ slave_name : OFFSET
+ slave_postfix: RAM
+ slave_type : RAM
+ fields:
+ -
+ field_name: fringe_stop_offset
+ width: g_fs_offset_w
+ number_of_fields: g_nof_channels
+ field_description: |
+ "Contains the offset for all nof_channels channels."
+ slave_discription: " "
+
+ peripheral_description: |
+ "The fringe stopping peripheral is based on piecewise linear coefficients. The coefficients are indicated as offset and step.
+ The offset and step are used to calculate an index that is used to select a certain phase from a look-up table. The look-up
+ table contains a series of complex values that are based on a sinewave. The length of the look-up table is determined by the
+ width of the offset RAM (offset_w). If offset_w = 10 then the length of the look-up table is 2^offset_w=1024. In that case
+ the look-up table contains 1024 complex values that make one sine-wave period.
+
+ The index is determined as follows:
+
+ index(t) = (offset + step*t) MOD 2^offset_w
+
+ Where t ranges from 0 to Tmax-1. Tmax is the number of samples that fit in the control interval (the sync interval).
+ The fringe stop peripheral is capable to process 1 or more channels in series (nof_channels).
+
+ Accumulation Register
+ The accumulation register that maintains the accumulated step value is flushed by the sync pulse in the system.
+ The accumulation register in the Apertif case is 31 bit wide. For the additon of the offset and the accumulated step the
+ 10 (offset_w) highest bit of the accumulated value are used --> offset(9:0) + step_accumulated(30:21).
+
+ RAMs
+ The fringe stop interface is facilitated by two RAMs:
+
+ -RAM_FRINGE_STOP_OFFSET
+ -RAM_FRINGE_STOP_STEP
+
+ Both RAMs are implemented as dual-page RAMs.The page swap is triggered by the sync-pulse. The VHDL is always accessing
+ the page that is NOT accessible for the software and vice-versa. This means that the values that are written to the RAMs
+ will only be actually used in the following sync-interval:
+
+
+ A| _ T0 _ T1 _ T2
+ A| sync __| |___________________________| |___________________________| |________________________
+ A| | VHDL uses data T0 | VHDL uses data T1 | VHDL uses data T2
+ A| | Software writes data T1 | Software writes data T2 | Software writes data T3
+ A| | | |
+ A| page_swap page_swap page_swap
+
+
+ The software should be sure to write the next set of data before the sync_interval expires. Keeping track of the
+ synchronization with the sync-pulse can be done, using one of the BSN Monitors in the system. In the Apertif system
+ the BSN Monitor at the input of the beamformer can be used.
+
+ The number_of_fields of both RAMs is determined by the number of unique channels that ought to be processed.
+
+ RAM_FRINGE_STOP_OFFSET
+ This RAM contains the offset values for all channels, ranging from Channel 0 to Channel Max-1. The width of the RAM is
+ defined by the offset_w.
+
+ +-----------------------------------------+
+ | RAM_address | RAM_content |
+ |-----------------------------------------|
+ | 0x0 | Offset_Channel_0 |
+ | 0x1 | Offset_Channel_1 |
+ | 0x2 | Offset_Channel_2 |
+ | 0x3 | Offset_Channel_3 |
+ | .. | .. |
+ | .. | Offset_Channel_Max-1 |
+ +-----------------------------------------+
+
+ RAM_FRINGE_STOP_STEP
+ This RAM contains the step size values for all channels, ranging from Channel 0 to Channel Max-1. The width of the RAM is
+ specified by the step_w.
+
+ +-----------------------------------------+
+ | RAM_address | RAM_content |
+ |-----------------------------------------|
+ | 0x0 | Step_Channel_0 |
+ | 0x1 | Step_Channel_1 |
+ | 0x2 | Step_Channel_2 |
+ | 0x3 | Step_Channel_3 |
+ | .. | .. |
+ | .. | Step_Channel_Max-1 |
+ +-----------------------------------------+"
+
diff --git a/libraries/io/epcs/epcs.peripheral.yaml b/libraries/io/epcs/epcs.peripheral.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..50045e05a6e1c132f0ab60ce0cc503ef82c2288f
--- /dev/null
+++ b/libraries/io/epcs/epcs.peripheral.yaml
@@ -0,0 +1,135 @@
+schema_name : args
+schema_version: 1.0
+schema_type : peripheral
+
+hdl_library_name : epcs
+hdl_library_description: " This is the description for the epcs package "
+
+peripherals:
+
+ # epcs_reg
+ -
+ peripheral_name: epcs_reg
+
+ parameters:
+ - {name: "g_sim_flash_model", value: TRUE}
+
+ slave_ports:
+ -
+ # actual hdl name: epcs_reg
+ slave_prefix : EPCS
+ slave_name : EPCS
+ slave_postfix: REG
+ slave_type : REG
+ fields:
+ -
+ field_name : addr
+ width : 24
+ access_mode : WO
+ address_offset: 0x0
+ field_description: " address to write to or read from "
+
+ -
+ field_name : rden
+ width : 1
+ access_mode : WO
+ address_offset: 0x1
+ field_description: " Read enable bit "
+
+ -
+ field_name : read_bit
+ width : 1
+ access_mode : WO
+ side_effect : PW
+ address_offset: 0x2
+ field_description: " Read bit "
+
+ -
+ field_name : write_bit
+ width : 1
+ access_mode : WO
+ side_effect : PW
+ address_offset: 0x3
+ field_description: " Write bit "
+
+ -
+ field_name : sector_erase
+ width : 1
+ access_mode : WO
+ address_offset: 0x4
+ field_description: " Sector erase bit "
+
+ -
+ field_name : busy
+ width : 1
+ access_mode : RO
+ address_offset: 0x5
+ field_description: " busy "
+
+ slave_description: " Read and write access to flash "
+
+ # actual hdl name: mms_dp_fifo_to_mm
+ -
+ slave_prefix : EPCS
+ slave_name : DPMM_CTRL
+ slave_postfix: REG
+ slave_type : REG
+ fields:
+ -
+ field_name : ctrl
+ width : 32
+ access_mode : RW
+ address_offset: 0x0
+ field_description: " "
+
+ -
+ slave_prefix : EPCS
+ slave_name : DPMM_DATA
+ slave_postfix: REG
+ slave_type : REG
+ fields:
+ -
+ field_name : data
+ width : 32
+ access_mode : RW
+ address_offset: 0x0
+ field_description: " "
+
+ # actual hdl name: mms_dp_fifo_from_mm
+ -
+ slave_prefix : EPCS
+ slave_name : MMDP_CTRL
+ slave_postfix: REG
+ slave_type : REG
+ fields:
+ -
+ field_name : ctrl
+ width : 32
+ access_mode : RW
+ address_offset: 0x0
+ field_description: " "
+
+ -
+ slave_prefix : EPCS
+ slave_name : MMDP_DATA
+ slave_postfix: REG
+ slave_type : REG
+ fields:
+ -
+ field_name : data
+ width : 32
+ access_mode : RW
+ address_offset: 0x0
+ field_description: " "
+
+ peripheral_description: |
+ "wi Bits SE R/W Name Default Description |REG_EPCS|
+ =============================================================================
+ 0 [23..0] WO addr 0x0 Address to write to/read from
+ 1 [0] WO rden 0x0 Read enable
+ 2 [0] PW WE read 0x0 Read
+ 3 [0] PW WE write 0x0 Write
+ 4 [0] WO sector_erase 0x0 Sector erase
+ 5 [0] RO busy 0x0 Busy
+ ============================================================================="
+
\ No newline at end of file
diff --git a/libraries/io/eth/eth.peripheral.yaml b/libraries/io/eth/eth.peripheral.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..f8a30232682a1caec7d26f287072ff4602e6d50d
--- /dev/null
+++ b/libraries/io/eth/eth.peripheral.yaml
@@ -0,0 +1,66 @@
+schema_name : args
+schema_version: 1.0
+schema_type : peripheral
+
+hdl_library_name : eth
+hdl_library_description: " This is the description for the eth package "
+
+peripherals:
+ -
+ peripheral_name: eth1g
+
+ parameters:
+ - { name: c_eth_ram_nof_words, value: 1024 }
+ #g_technology: c_tech_select_default
+ #g_ETH_PHY : "LVDS"
+
+ slave_ports:
+ -
+ # actual hdl name: reg_tse
+ slave_prefix : ETH
+ slave_name : TSE
+ slave_postfix: REG
+ slave_type : REG
+ fields:
+ -
+ field_name : status
+ access_mode : RO
+ address_offset : 0x0
+ number_of_fields: 1024
+ field_description: |
+ " reg tse "
+ slave_description: ""
+ -
+ # actual hdl name: reg
+ slave_prefix : ETH
+ slave_name : REG
+ slave_postfix: REG
+ slave_type : REG
+ fields:
+ -
+ field_name : status
+ access_mode : RO
+ address_offset : 0x0
+ number_of_fields: 11
+ field_description: " reg registers "
+ slave_description: " "
+ -
+ # actual hdl name: ram
+ slave_prefix : ETH
+ slave_name : RAM
+ slave_postfix: RAM
+ slave_type : RAM
+ fields:
+ -
+ field_name : ram
+ number_of_fields: c_eth_ram_nof_words
+ field_description: |
+ "Contains the Waveform data for the data-streams to be send"
+ slave_description: " "
+
+ peripheral_description: |
+ "
+ Connect the 1GbE TSE to the microprocessor and to streaming UDP ports. The
+ packets for the streaming channels are directed based on the UDP port
+ number and all other packets are transfered to the default control channel."
+
diff --git a/libraries/io/ppsh/ppsh.peripheral.yaml b/libraries/io/ppsh/ppsh.peripheral.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..b9b71e89d669190ec79128165c4c5e501c1d89d0
--- /dev/null
+++ b/libraries/io/ppsh/ppsh.peripheral.yaml
@@ -0,0 +1,46 @@
+schema_name : args
+schema_version: 1.0
+schema_type : peripheral
+
+hdl_library_name : ppsh
+hdl_library_description: " This is the description for the finppshge_stop library "
+
+peripherals:
+ -
+ peripheral_name: ppsh
+ parameters:
+ - { name: g_cross_clock_domain, value: TRUE }
+ - { name: g_st_clk_freq, value: 200 * 10**6 }
+
+ slave_ports:
+ -
+ # actual hdl name: reg_ppsh
+ slave_prefix : PPSH
+ slave_name : PPSH
+ slave_postfix: REG
+ slave_type : REG
+ fields:
+ -
+ field_name : status
+ access_mode : RO
+ address_offset: 0x0
+ field_description: " ppsh status "
+ -
+ field_name : control
+ address_offset: 0x1
+ field_description: " ppsh control "
+ slave_discription: " "
+
+ peripheral_description: |
+ "
+ . Report PPS toggle, stable and period capture count
+ . Set dp_clk capture edge for PPS
+ Set expected period capture count for PPS stable
+ +----------------------------------------------------------------------------+
+ |31 (byte3) 24|23 (byte2) 16|15 (byte1) 8|7 (byte0) 0| wi |
+ |-----------------------------------------------------------------------|----|
+ |toggle[31], stable[30] xxx capture_cnt = [29:0]| 0 |
+ |-----------------------------------------------------------------------|----|
+ |edge[31], xxx expected_cnt = [29:0]| 1 |
+ +----------------------------------------------------------------------------+"
+
diff --git a/libraries/io/remu/remu.peripheral.yaml b/libraries/io/remu/remu.peripheral.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..51d26382f1fc9515204307ed5da0da66692d1dab
--- /dev/null
+++ b/libraries/io/remu/remu.peripheral.yaml
@@ -0,0 +1,90 @@
+schema_name : args
+schema_version: 1.0
+schema_type : peripheral
+
+hdl_library_name : remu
+hdl_library_description: " This is the description for the remu package "
+
+peripherals:
+
+ # peripheral, remu_reg
+ -
+ peripheral_name: remu_reg
+
+ parameters:
+ - { name: g_data_w, value: 24 }
+
+ slave_ports:
+ -
+ # actual hdl name: reg_remu
+ slave_prefix : WORK
+ slave_name : REMU
+ slave_postfix: REG
+ slave_type : REG
+ fields:
+ -
+ field_name : reconfigure_key
+ width : c_word_w
+ access_mode : WO
+ address_offset: 0x0
+ field_description: " reconfigure key for safety "
+
+ -
+ field_name : param
+ width : 3
+ access_mode : WO
+ address_offset: 0x1
+ radix : unsigned
+ field_description: " "
+
+ -
+ field_name : read_param
+ width : 1
+ access_mode : WO
+ side_effect : PW
+ address_offset: 0x2
+ field_description: " read_param "
+
+ -
+ field_name : write_param
+ width : 1
+ access_mode : WO
+ side_effect : PW
+ address_offset: 0x3
+ field_description: " write_param "
+
+ -
+ field_name : data_out
+ width : g_data_w
+ access_mode : RO
+ address_offset: 0x4
+ field_description: " data_out "
+
+ -
+ field_name : data_in
+ width : g_data_w
+ access_mode : WO
+ address_offset: 0x5
+ field_description: " data_in "
+
+ -
+ field_name : busy
+ width : 1
+ access_mode : RO
+ address_offset: 0x6
+ field_description: " busy "
+
+ slave_description: " Remote Upgrade "
+
+ peripheral_description: |
+ "wi Bits R/W SE Name Default Description |REG_EPCS|
+ =============================================================================
+ 0 [31..0] WO reconfigure_key 0x0
+ 1 [2..0] WO param
+ 2 [0] WO PW read_param
+ 3 [0] WO PW write_param
+ 4 [23..0] RO data_out
+ 5 [23..0] WO data_in
+ 6 [0] RO busy
+ =============================================================================
+ "