diff --git a/applications/lofar2/designs/lofar2_unb2c_sdp_station/revisions/lofar2_unb2c_sdp_station_bf/tb_lofar2_unb2c_sdp_station_bf.vhd b/applications/lofar2/designs/lofar2_unb2c_sdp_station/revisions/lofar2_unb2c_sdp_station_bf/tb_lofar2_unb2c_sdp_station_bf.vhd
index 1b819a9a7d1559a8573d573ed0ecad078e7c9247..074281a7d284b4677fa633afe71e0d4b7d467e1f 100644
--- a/applications/lofar2/designs/lofar2_unb2c_sdp_station/revisions/lofar2_unb2c_sdp_station_bf/tb_lofar2_unb2c_sdp_station_bf.vhd
+++ b/applications/lofar2/designs/lofar2_unb2c_sdp_station/revisions/lofar2_unb2c_sdp_station_bf/tb_lofar2_unb2c_sdp_station_bf.vhd
@@ -107,10 +107,15 @@
 -- * Use g_beamlet_scale = 2**10, for full scale WG and N_ant = 1, see [1]
 -- * Using g_beamlet = c_sdp_S_sub_bf-1 = 487 puts g_subband = 102 at the last
 --   beamlet in the beamset, so at index 974,975 of rx_beamlet_list_re/im.
+-- * Try g_beamlet somewhere random in range 0:c_sdp_S_sub_bf-1 = 0:487 to
+--   verify that the beamlet output reorder works at that position in the
+--   beamlets block. E.g. use some prime number, like g_beamlet = 137.
 -- * Default beamlet 102 also contains g_subband = 102. On HW the BF weights
 --   are default 0, but in sim the BF weights in node_sdp_beamformer.vhd
 --   are default unit weights. Therefore also write the BF weight for default
---   beamlet 102 to define it value, in case g_beamlet /= 102.
+--   beamlet 102 to define it value, in case g_beamlet /= 102. In this tb
+--   the BF weigth for beamlet = g_subband = 102 is set to 0, so that the
+--   g_subband = 102 will only show up in g_beamlet.
 -- * A simulation only section in sdp_beamformer_output.vhd disturbs the BSN,
 --   to cause a merged payload error, so that sdp_source_info_payload_error
 --   can be verified here.
@@ -165,7 +170,7 @@ entity tb_lofar2_unb2c_sdp_station_bf is
     g_sp_remnant_ampl    : real := 0.1;  -- WG normalized amplitude for remnant sp
     g_sp_remnant_phase   : real := 15.0;  -- WG phase in degrees for remnant sp
     g_subband            : natural := 102;  -- select g_subband at index 102 = 102/1024 * 200MHz = 19.921875 MHz
-    g_beamlet            : natural := c_sdp_S_sub_bf - 1;  -- map g_subband to g_beamlet index in beamset in range(c_sdp_S_sub_bf = 488)
+    g_beamlet            : natural := 137;  -- map g_subband to g_beamlet index in beamset in range(c_sdp_S_sub_bf = 488)
     g_beamlet_scale      : real := 1.0 / 2.0**9;  -- g_beamlet output scale factor
     g_bf_x_gain          : real := 0.7;  -- g_beamlet X BF weight normalized gain for g_sp
     g_bf_y_gain          : real := 0.6;  -- g_beamlet Y BF weight normalized gain for g_sp
@@ -1355,8 +1360,8 @@ begin
     rx_beamlet_valid <= '0';
     -- Wait until start of a beamlet packet
     proc_common_wait_until_high(ext_clk, rx_beamlet_sosi.sop);
-    -- c_sdp_cep_nof_beamlets_per_longword = 2 dual pol beamlets (= XY, XY) per 64b data word
-    for I in 0 to (c_sdp_cep_nof_beamlets_per_packet / c_sdp_cep_nof_beamlets_per_longword) - 1 loop
+    -- c_sdp_nof_beamlets_per_longword = 2 dual pol beamlets (= XY, XY) per 64b data word
+    for I in 0 to (c_sdp_cep_nof_beamlets_per_packet / c_sdp_nof_beamlets_per_longword) - 1 loop
       proc_common_wait_until_high(ext_clk, rx_beamlet_sosi.valid);
       rx_beamlet_valid <= '1';
       -- Capture rx beamlets per longword in rx_beamlet_arr, for time series view in Wave window
@@ -1383,7 +1388,7 @@ begin
       -- contains no WAIT statement.
       wait until rising_edge(ext_clk);
       rx_beamlet_valid <= '0';
-      rx_beamlet_cnt   <= (rx_beamlet_cnt + c_sdp_cep_nof_beamlets_per_longword) mod c_sdp_cep_nof_beamlets_per_block;  -- 4 blocks/packet
+      rx_beamlet_cnt   <= (rx_beamlet_cnt + c_sdp_nof_beamlets_per_longword) mod c_sdp_cep_nof_beamlets_per_block;  -- 4 blocks/packet
     end loop;
   end process;