diff --git a/libraries/technology/ip_arria10/fractional_pll_clk200/compile_ip.tcl b/libraries/technology/ip_arria10/fractional_pll_clk200/compile_ip.tcl
new file mode 100644
index 0000000000000000000000000000000000000000..032b1953a939ad8a1feb23c1c0a7377377338c2f
--- /dev/null
+++ b/libraries/technology/ip_arria10/fractional_pll_clk200/compile_ip.tcl
@@ -0,0 +1,49 @@
+#------------------------------------------------------------------------------
+#
+# Copyright (C) 2014
+# ASTRON (Netherlands Institute for Radio Astronomy) <http://www.astron.nl/>
+# JIVE (Joint Institute for VLBI in Europe) <http://www.jive.nl/>
+# P.O.Box 2, 7990 AA Dwingeloo, The Netherlands
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+#------------------------------------------------------------------------------
+
+# This file is based on generated file mentor/msim_setup.tcl.
+# - the values for modelsim_search_libraries key in the hdllib.cfg follow from altera libraries vmap section in the msim_setup.tcl
+# - vmap for the IP specific libraries and compile all IP source files into those libraries similar as in the msim_setup.tcl
+# - replace QSYS_SIMDIR by IP_DIR
+# - if the testbench is also generated with QSYS then only the IP_TBDIR files are needed, because these also contain the source files.
+
+set IP_DIR "$env(RADIOHDL)/libraries/technology/ip_arria10/fractional_pll_clk200/generated/sim"
+
+#vlib ./work/ ;# Assume library work already exists
+
+vmap ip_arria10_fractional_pll_clk200_altera_xcvr_fpll_a10_150 ./work/
+
+ vlog -sv "$IP_DIR/../altera_xcvr_fpll_a10_150/sim/twentynm_xcvr_avmm.sv" -work ip_arria10_fractional_pll_clk200_altera_xcvr_fpll_a10_150
+ vlog -sv "$IP_DIR/../altera_xcvr_fpll_a10_150/sim/mentor/twentynm_xcvr_avmm.sv" -work ip_arria10_fractional_pll_clk200_altera_xcvr_fpll_a10_150
+ vlog -sv "$IP_DIR/../altera_xcvr_fpll_a10_150/sim/alt_xcvr_resync.sv" -work ip_arria10_fractional_pll_clk200_altera_xcvr_fpll_a10_150
+ vlog -sv "$IP_DIR/../altera_xcvr_fpll_a10_150/sim/mentor/alt_xcvr_resync.sv" -work ip_arria10_fractional_pll_clk200_altera_xcvr_fpll_a10_150
+ vlog -sv "$IP_DIR/../altera_xcvr_fpll_a10_150/sim/altera_xcvr_fpll_a10.sv" -work ip_arria10_fractional_pll_clk200_altera_xcvr_fpll_a10_150
+ vlog -sv "$IP_DIR/../altera_xcvr_fpll_a10_150/sim/mentor/altera_xcvr_fpll_a10.sv" -work ip_arria10_fractional_pll_clk200_altera_xcvr_fpll_a10_150
+ vlog -sv "$IP_DIR/../altera_xcvr_fpll_a10_150/sim/a10_avmm_h.sv" -work ip_arria10_fractional_pll_clk200_altera_xcvr_fpll_a10_150
+ vlog -sv "$IP_DIR/../altera_xcvr_fpll_a10_150/sim/alt_xcvr_native_avmm_nf.sv" -work ip_arria10_fractional_pll_clk200_altera_xcvr_fpll_a10_150
+ vlog -sv "$IP_DIR/../altera_xcvr_fpll_a10_150/sim/alt_xcvr_pll_embedded_debug.sv" -work ip_arria10_fractional_pll_clk200_altera_xcvr_fpll_a10_150
+ vlog -sv "$IP_DIR/../altera_xcvr_fpll_a10_150/sim/alt_xcvr_pll_avmm_csr.sv" -work ip_arria10_fractional_pll_clk200_altera_xcvr_fpll_a10_150
+ vlog -sv "$IP_DIR/../altera_xcvr_fpll_a10_150/sim/mentor/alt_xcvr_pll_embedded_debug.sv" -work ip_arria10_fractional_pll_clk200_altera_xcvr_fpll_a10_150
+ vlog -sv "$IP_DIR/../altera_xcvr_fpll_a10_150/sim/mentor/alt_xcvr_pll_avmm_csr.sv" -work ip_arria10_fractional_pll_clk200_altera_xcvr_fpll_a10_150
+ vcom "$IP_DIR/ip_arria10_fractional_pll_clk200.vhd"
+
+
diff --git a/libraries/technology/ip_arria10/fractional_pll_clk200/generate_ip.sh b/libraries/technology/ip_arria10/fractional_pll_clk200/generate_ip.sh
new file mode 100755
index 0000000000000000000000000000000000000000..f13fa2ffe330f3065fd15bd931fb13fa2ee8a02a
--- /dev/null
+++ b/libraries/technology/ip_arria10/fractional_pll_clk200/generate_ip.sh
@@ -0,0 +1,44 @@
+#!/bin/bash
+# -------------------------------------------------------------------------- #
+#
+# Copyright (C) 2014
+# ASTRON (Netherlands Institute for Radio Astronomy) <http://www.astron.nl/>
+# JIVE (Joint Institute for VLBI in Europe) <http://www.jive.nl/>
+# P.O.Box 2, 7990 AA Dwingeloo, The Netherlands
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+# -------------------------------------------------------------------------- #
+#
+# Purpose: Generate IP with Qsys
+# Description:
+# Generate the IP in a separate generated/ subdirectory.
+#
+# Usage:
+#
+# ./generate_ip.sh
+#
+
+# Tool settings for selected target "unb2" with arria10
+. ${RADIOHDL}/tools/quartus/set_quartus unb2
+
+#qsys-generate --help
+
+# Only generate the source IP
+# - use --synthesis=VHDL to have top level in VHDL similar as with MegaWizard
+qsys-generate ip_arria10_fractional_pll_clk200.qsys \
+ --synthesis=VHDL \
+ --simulation=VHDL \
+ --output-directory=generated \
+ --allow-mixed-language-simulation
diff --git a/libraries/technology/ip_arria10/fractional_pll_clk200/hdllib.cfg b/libraries/technology/ip_arria10/fractional_pll_clk200/hdllib.cfg
new file mode 100644
index 0000000000000000000000000000000000000000..5ff81486b47748672e7284d1c1956b716d5241be
--- /dev/null
+++ b/libraries/technology/ip_arria10/fractional_pll_clk200/hdllib.cfg
@@ -0,0 +1,16 @@
+hdl_lib_name = ip_arria10_fractional_pll_clk200
+hdl_library_clause_name = ip_arria10_fractional_pll_clk200_altera_xcvr_fpll_a10_150
+hdl_lib_uses_synth =
+hdl_lib_uses_sim =
+
+hdl_lib_technology = ip_arria10
+
+modelsim_compile_ip_files =
+ $RADIOHDL/libraries/technology/ip_arria10/fractional_pll_clk200/compile_ip.tcl
+
+synth_files =
+
+test_bench_files =
+
+quartus_qip_files =
+ generated/ip_arria10_fractional_pll_clk200.qip
diff --git a/libraries/technology/ip_arria10/fractional_pll_clk200/ip_arria10_fractional_pll_clk200.qsys b/libraries/technology/ip_arria10/fractional_pll_clk200/ip_arria10_fractional_pll_clk200.qsys
new file mode 100644
index 0000000000000000000000000000000000000000..5917cad0350b549b3cb3456e9d4a4291951cd1bc
--- /dev/null
+++ b/libraries/technology/ip_arria10/fractional_pll_clk200/ip_arria10_fractional_pll_clk200.qsys
@@ -0,0 +1,210 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<system name="$${FILENAME}">
+ <component
+ name="$${FILENAME}"
+ displayName="$${FILENAME}"
+ version="1.0"
+ description=""
+ tags="INTERNAL_COMPONENT=true"
+ categories="System" />
+ <parameter name="bonusData"><![CDATA[bonusData
+{
+ element $${FILENAME}
+ {
+ datum _originalDeviceFamily
+ {
+ value = "Arria 10";
+ type = "String";
+ }
+ }
+ element xcvr_fpll_a10_0
+ {
+ datum _sortIndex
+ {
+ value = "0";
+ type = "int";
+ }
+ }
+}
+]]></parameter>
+ <parameter name="clockCrossingAdapter" value="HANDSHAKE" />
+ <parameter name="device" value="10AX115U4F45I3SGES" />
+ <parameter name="deviceFamily" value="Arria 10" />
+ <parameter name="deviceSpeedGrade" value="3" />
+ <parameter name="fabricMode" value="QSYS" />
+ <parameter name="generateLegacySim" value="false" />
+ <parameter name="generationId" value="0" />
+ <parameter name="globalResetBus" value="false" />
+ <parameter name="hdlLanguage" value="VERILOG" />
+ <parameter name="hideFromIPCatalog" value="true" />
+ <parameter name="lockedInterfaceDefinition" value="" />
+ <parameter name="maxAdditionalLatency" value="1" />
+ <parameter name="projectName" value="" />
+ <parameter name="sopcBorderPoints" value="false" />
+ <parameter name="systemHash" value="0" />
+ <parameter name="testBenchDutName" value="" />
+ <parameter name="timeStamp" value="0" />
+ <parameter name="useTestBenchNamingPattern" value="false" />
+ <instanceScript></instanceScript>
+ <interface
+ name="hssi_pll_cascade_clk"
+ internal="xcvr_fpll_a10_0.hssi_pll_cascade_clk" />
+ <interface
+ name="outclk0"
+ internal="xcvr_fpll_a10_0.outclk0"
+ type="clock"
+ dir="start">
+ <port name="outclk0" internal="outclk0" />
+ </interface>
+ <interface
+ name="outclk1"
+ internal="xcvr_fpll_a10_0.outclk1"
+ type="clock"
+ dir="start">
+ <port name="outclk1" internal="outclk1" />
+ </interface>
+ <interface
+ name="outclk2"
+ internal="xcvr_fpll_a10_0.outclk2"
+ type="clock"
+ dir="start">
+ <port name="outclk2" internal="outclk2" />
+ </interface>
+ <interface
+ name="pll_cal_busy"
+ internal="xcvr_fpll_a10_0.pll_cal_busy"
+ type="conduit"
+ dir="end">
+ <port name="pll_cal_busy" internal="pll_cal_busy" />
+ </interface>
+ <interface
+ name="pll_locked"
+ internal="xcvr_fpll_a10_0.pll_locked"
+ type="conduit"
+ dir="end">
+ <port name="pll_locked" internal="pll_locked" />
+ </interface>
+ <interface
+ name="pll_powerdown"
+ internal="xcvr_fpll_a10_0.pll_powerdown"
+ type="conduit"
+ dir="end">
+ <port name="pll_powerdown" internal="pll_powerdown" />
+ </interface>
+ <interface
+ name="pll_refclk0"
+ internal="xcvr_fpll_a10_0.pll_refclk0"
+ type="clock"
+ dir="end">
+ <port name="pll_refclk0" internal="pll_refclk0" />
+ </interface>
+ <interface name="tx_serial_clk" internal="xcvr_fpll_a10_0.tx_serial_clk" />
+ <module
+ name="xcvr_fpll_a10_0"
+ kind="altera_xcvr_fpll_a10"
+ version="15.0"
+ enabled="1"
+ autoexport="1">
+ <parameter name="base_device" value="NIGHTFURY5ES" />
+ <parameter name="enable_bonding_clks" value="0" />
+ <parameter name="enable_cascade_in" value="0" />
+ <parameter name="enable_fb_comp_bonding" value="0" />
+ <parameter name="enable_hfreq_clk" value="0" />
+ <parameter name="enable_mcgb" value="0" />
+ <parameter name="enable_mcgb_pcie_clksw" value="0" />
+ <parameter name="enable_pld_mcgb_cal_busy_port" value="0" />
+ <parameter name="enable_pll_reconfig" value="0" />
+ <parameter name="generate_add_hdl_instance_example" value="0" />
+ <parameter name="generate_docs" value="1" />
+ <parameter name="gui_actual_outclk0_frequency" value="100.0" />
+ <parameter name="gui_actual_outclk1_frequency" value="100.0" />
+ <parameter name="gui_actual_outclk2_frequency" value="100.0" />
+ <parameter name="gui_actual_outclk3_frequency" value="100.0" />
+ <parameter name="gui_actual_refclk_frequency" value="100.0" />
+ <parameter name="gui_bw_sel" value="low" />
+ <parameter name="gui_cascade_outclk_index" value="0" />
+ <parameter name="gui_desired_hssi_cascade_frequency" value="100.0" />
+ <parameter name="gui_desired_outclk0_frequency" value="200.0" />
+ <parameter name="gui_desired_outclk1_frequency" value="200.0" />
+ <parameter name="gui_desired_outclk2_frequency" value="400.0" />
+ <parameter name="gui_desired_outclk3_frequency" value="100.0" />
+ <parameter name="gui_desired_refclk_frequency" value="200.0" />
+ <parameter name="gui_enable_active_clk" value="false" />
+ <parameter name="gui_enable_cascade_out" value="false" />
+ <parameter name="gui_enable_clk_bad" value="false" />
+ <parameter name="gui_enable_dps" value="false" />
+ <parameter name="gui_enable_fractional" value="false" />
+ <parameter name="gui_enable_hip_cal_done_port" value="0" />
+ <parameter name="gui_enable_manual_config" value="false" />
+ <parameter name="gui_enable_manual_hssi_counters" value="false" />
+ <parameter name="gui_enable_pld_cal_busy_port" value="1" />
+ <parameter name="gui_fpll_mode" value="0" />
+ <parameter name="gui_fractional_x" value="32" />
+ <parameter name="gui_hip_cal_en" value="0" />
+ <parameter name="gui_hssi_output_clock_frequency" value="1250.0" />
+ <parameter name="gui_hssi_prot_mode" value="0" />
+ <parameter name="gui_iqtxrxclk_outclk_index" value="0" />
+ <parameter name="gui_number_of_output_clocks" value="3" />
+ <parameter name="gui_operation_mode" value="0" />
+ <parameter name="gui_outclk0_actual_phase_shift" value="0.0" />
+ <parameter name="gui_outclk0_actual_phase_shift_deg" value="0.0" />
+ <parameter name="gui_outclk0_desired_phase_shift" value="0.0" />
+ <parameter name="gui_outclk0_phase_shift_unit" value="0" />
+ <parameter name="gui_outclk1_actual_phase_shift" value="0.0" />
+ <parameter name="gui_outclk1_actual_phase_shift_deg" value="0.0" />
+ <parameter name="gui_outclk1_desired_phase_shift" value="90" />
+ <parameter name="gui_outclk1_phase_shift_unit" value="1" />
+ <parameter name="gui_outclk2_actual_phase_shift" value="0 ps" />
+ <parameter name="gui_outclk2_actual_phase_shift_deg" value="0 deg" />
+ <parameter name="gui_outclk2_desired_phase_shift" value="0" />
+ <parameter name="gui_outclk2_phase_shift_unit" value="0" />
+ <parameter name="gui_outclk3_actual_phase_shift" value="0.0" />
+ <parameter name="gui_outclk3_actual_phase_shift_deg" value="0.0" />
+ <parameter name="gui_outclk3_desired_phase_shift" value="0" />
+ <parameter name="gui_outclk3_phase_shift_unit" value="0" />
+ <parameter name="gui_pll_c_counter_0" value="1" />
+ <parameter name="gui_pll_c_counter_1" value="1" />
+ <parameter name="gui_pll_c_counter_2" value="1" />
+ <parameter name="gui_pll_c_counter_3" value="1" />
+ <parameter name="gui_pll_dsm_fractional_division" value="1" />
+ <parameter name="gui_pll_m_counter" value="1" />
+ <parameter name="gui_pll_n_counter" value="1" />
+ <parameter name="gui_pll_set_hssi_k_counter" value="1" />
+ <parameter name="gui_pll_set_hssi_l_counter" value="1" />
+ <parameter name="gui_pll_set_hssi_m_counter" value="1" />
+ <parameter name="gui_pll_set_hssi_n_counter" value="1" />
+ <parameter name="gui_refclk1_frequency" value="100.0" />
+ <parameter name="gui_refclk_cnt" value="1" />
+ <parameter name="gui_refclk_index" value="0" />
+ <parameter name="gui_refclk_switch" value="false" />
+ <parameter name="gui_reference_clock_frequency" value="200.0" />
+ <parameter name="gui_self_reset_enabled" value="false" />
+ <parameter name="gui_switchover_delay" value="0" />
+ <parameter name="gui_switchover_mode">Automatic Switchover</parameter>
+ <parameter name="mcgb_aux_clkin_cnt" value="0" />
+ <parameter name="mcgb_div" value="1" />
+ <parameter name="pma_width" value="64" />
+ <parameter name="rcfg_debug" value="0" />
+ <parameter name="rcfg_file_prefix">altera_xcvr_fpll_a10</parameter>
+ <parameter name="rcfg_h_file_enable" value="0" />
+ <parameter name="rcfg_jtag_enable" value="0" />
+ <parameter name="rcfg_mif_file_enable" value="0" />
+ <parameter name="rcfg_multi_enable" value="0" />
+ <parameter name="rcfg_param_vals1" value="" />
+ <parameter name="rcfg_param_vals2" value="" />
+ <parameter name="rcfg_profile_cnt" value="2" />
+ <parameter name="rcfg_profile_select" value="1" />
+ <parameter name="rcfg_sv_file_enable" value="0" />
+ <parameter name="rcfg_txt_file_enable" value="0" />
+ <parameter name="set_altera_xcvr_fpll_a10_calibration_en" value="1" />
+ <parameter name="set_capability_reg_enable" value="0" />
+ <parameter name="set_csr_soft_logic_enable" value="0" />
+ <parameter name="set_user_identifier" value="0" />
+ <parameter name="silicon_rev" value="false" />
+ <parameter name="support_mode" value="user_mode" />
+ </module>
+ <interconnectRequirement for="$system" name="qsys_mm.clockCrossingAdapter" value="HANDSHAKE" />
+ <interconnectRequirement for="$system" name="qsys_mm.enableEccProtection" value="FALSE" />
+ <interconnectRequirement for="$system" name="qsys_mm.insertDefaultSlave" value="FALSE" />
+ <interconnectRequirement for="$system" name="qsys_mm.maxAdditionalLatency" value="1" />
+</system>