diff --git a/LCU/checkhardware/config/FR606-check_hardware.conf b/LCU/checkhardware/config/FR606-check_hardware.conf
index f1a1ca5777d98707ca223b86a95d9f70e98d3cf3..045a901b766ecbdbec7488484f28d86e559aa2fb 100755
--- a/LCU/checkhardware/config/FR606-check_hardware.conf
+++ b/LCU/checkhardware/config/FR606-check_hardware.conf
@@ -29,8 +29,8 @@ station= FR606C
 always= RV, TV, RBC, TBC
 list.0=
 list.1= SPU,TM,RCU3,RCU5
-list.2= SPU,TM,RCU3,M5,SN5,O5,N5,SP5,S7,E7
-list.3= S3
+list.2= SPU,TM,RCU3,M5,SN5,O5,N5,SP5,S5,E5
+list.3= S5,E5
 
 [spu]
 temperature.min= 10.0
@@ -131,10 +131,10 @@ short.mean-pwr.min= 55.0
 short.mean-pwr.max= 61.0
 flat.mean-pwr.min= 61.0
 flat.mean-pwr.max= 64.5
-rf.subbands= 105
+rf.subbands= 256
 rf.min-sb-pwr= 65.0
-rf.negative-deviation= -24.0
-rf.positive-deviation= 12.0
+rf.negative-deviation= -28.0
+rf.positive-deviation= 16.0
 noise.negative-deviation= -3.0
 noise.positive-deviation= 1.5
 noise.max-difference= 1.5
@@ -147,16 +147,16 @@ oscillation.min-peak-pwr= 6.0
 oscillation.passband= 1:511
 spurious.min-peak-pwr= 3.0
 spurious.passband= 1:511
-testsignal.start-cmd= echo set config 56.0 -10 | nc ncu 8093
+testsignal.start-cmd= echo set_config 150.0 -10 | nc ncu 8093
 testsignal.stop-cmd= echo bye | nc ncu 8093
-testsignal.status-cmd= echo get config | nc ncu 8093
-testsignal.ok-status= Frequency: 56 MHz Power level: -10 dBm RF: ON
+testsignal.status-cmd= echo get_config | nc ncu 8093 | grep Frequency
+testsignal.ok-status= Frequency: 150 MHz Power level: -10 dBm RF: ON
 
 [rcumode.5.element]
-rf.subbands= 105
+rf.subbands= 256
 rf.min-sb-pwr= 65.0
-rf.negative-deviation= -24.0
-rf.positive-deviation= 12.0
+rf.negative-deviation= -30.0
+rf.positive-deviation= 16.0
 noise.negative-deviation= -3.0
 noise.positive-deviation= 1.5
 noise.max-difference= 1.5
@@ -165,10 +165,10 @@ oscillation.min-peak-pwr= 6.0
 oscillation.passband= 1:511
 spurious.min-peak-pwr= 3.0
 spurious.passband= 1:511
-testsignal.start-cmd= echo set config 56.0 -10 | nc ncu 8093
+testsignal.start-cmd= echo set_config 150.0 0 | nc ncu 8093
 testsignal.stop-cmd= echo bye | nc ncu 8093
-testsignal.status-cmd= echo get config | nc ncu 8093
-testsignal.ok-status= Frequency: 56 MHz Power level: -10 dBm RF: ON
+testsignal.status-cmd= echo get_config | nc ncu 8093 | grep Frequency
+testsignal.ok-status= Frequency: 150 MHz Power level: 0 dBm RF: ON
 
 [rcumode.6.tile]
 short.mean-pwr.min= 55.0